Gowin to Knowear Route

The MSTS 1 Route Editor can be a beast to use, but it's capable of some amazing results, here you can talk with the wizards that are building some of the fantastic routes available and learn how to make your own.

Moderator: Moderators

User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Gowin to Knowear Route

Post by partyspiritz »

Gowin to Knowear is going to be given a new lease of life. Because of my liking for playing with Scenery. I have spoken to Doug (dkightley) who gave me the idae



Regaeds

John

Partyspiritz
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
User avatar
leviathan1949
Model Railway Anorak
Model Railway Anorak
Posts: 3363
Joined: Fri Dec 14, 2001 12:00 am
Location: Onehouse
Contact:

Re: Gowin to Knowear Route

Post by leviathan1949 »

Equally a new lease of life for "Nowhere Man". :D
User avatar
ianmacmillan
Very Active Forum Member
Posts: 9588
Joined: Fri Feb 28, 2003 12:39 pm
Location: N. Lanarkshire Scotland

Re: Gowin to Knowear Route

Post by ianmacmillan »

Don't forget the laughterhouse.


Image


And the furniture factory.


Image


:D
[album 80489 WWCo.jpg]
If it's got buffers it's Chain.
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

I hope I can make you all proud. it is a people's route I dont wish to take any credit for anything. I will try to post something each week. I am poping to doug's on sat as it short drive.

I would like any input or Scenery Item's

All being well I should have something to show at the Redditch Show Birmingham 20/21 September

I would like to keep it fun some pub's or shops with fun names anything like that


Regards

John
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

Would like to get started Now but will have to wait until I get to doug's on saturday. To get the route and stuff as some of you know this was on the forums some time ago. I want to keep it fun and have a "sense of humour".


Regards



John
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
dkightley
Very Active Forum Member
Posts: 9802
Joined: Sat May 08, 2004 8:52 pm

Re: Gowin to Knowear Route

Post by dkightley »

Help!

What have I started??? :-? :-?


I'm actually quite happy that John wants to resurrect the route from the depths of my hard drive. We'll see what happens after tomorrow evening....
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

Thank you doug for being such a good friend. I am sure Iam going to need your help. and others. This is going to be a good learning curve for me and who knows ?


Maybe I should ask Matt if he would put this back on the forums. Maybe I should add a mouse to route or somthing. Like a well know artist adds to his pictures.

Regards

John
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
dkightley
Very Active Forum Member
Posts: 9802
Joined: Sat May 08, 2004 8:52 pm

Re: Gowin to Knowear Route

Post by dkightley »

I had a look at the state of the route earlier this evening.......and I've got to admit that looking at it after such a long time, I'm actually quite impressed with what was achieved.

The trackwork is fully laid, stations, some of the buildings, the roads, signalling are all in place. The key locations of the route still require placing, and a fair amount of finishing off is required.

I've passed a copy of the route to John....who has gone off with a smile on his face to load it up on his PC. Knowing John's determination, I'm sure he's going to get the route ready for publication eventually.
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

As I type the route is loading. The plan is to have something for brum.

John
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
User avatar
ARG706
Well Established Forum Member
Posts: 523
Joined: Mon Dec 25, 2006 7:16 am
Contact:

Re: Gowin to Knowear Route

Post by ARG706 »

partyspiritz wrote:As I type the route is loading. The plan is to have something for brum.

John
Loading one of those send/don't send messages? They take a while don't they 8)
User avatar
ianmacmillan
Very Active Forum Member
Posts: 9588
Joined: Fri Feb 28, 2003 12:39 pm
Location: N. Lanarkshire Scotland

Re: Gowin to Knowear Route

Post by ianmacmillan »

partyspiritz wrote:As I type the route is loading. The plan is to have something for brum.

John


Image
[album 80489 WWCo.jpg]
If it's got buffers it's Chain.
User avatar
WSR2005
Very Active Forum Member
Posts: 1359
Joined: Wed Oct 05, 2005 6:22 pm
Location: South Devon
Contact:

Re: Gowin to Knowear Route

Post by WSR2005 »

:lol: Very clever Ian :P

This looks to be an interesting project, I think I must have missed it the first time around but I look forward to seeing how it goes :D

Tim
Tim McLennan (WSR2005)

Alderney Railway WIP - Donationware pack for MSTS
http://forums.uktrainsim.com/viewtopic. ... 40&t=82125
http://mstsalderney.webs.com
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

Thanks Ian we could add Rosie & Jim and The Ragdoll narrowboat

Some work has been done today. Will post some screen shots at the end of the week There are loads of docs to read so things should be sort of in the right place's There are a few buildings ( PUBS ) from Swindon.


Regards

John
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
User avatar
partyspiritz
Very Active Forum Member
Posts: 3527
Joined: Wed May 25, 2005 12:06 am
Location: RAF Brize Norton
Contact:

Re: Gowin to Knowear Route

Post by partyspiritz »

Thank you for Text's doug been working hard, Had a few Probs with ref.files may need your help sorting this.. Would like get some more terraced house's just so as they are not all the same.


Work work work
Sleep


Regards


Nowear Man
The Bacup Branch gone to bed
The Fairford Branch http://www.martin.loader.btinternet.co. ... Branch.htm Not started
dkightley
Very Active Forum Member
Posts: 9802
Joined: Sat May 08, 2004 8:52 pm

Re: Gowin to Knowear Route

Post by dkightley »

 Click to view more informationInverclyde Terrace House [1323652 bytes] - Inverclyde Terraced House v1.zip
File ID: 18912 Date: 23 Jul 2008 - 524 Downloads

 Click to view more informationTerraced Houses [Part II] [358860 bytes] - Rotherham Houses.zip
File ID: 16314 Date: 24 Mar 2007 - 601 Downloads

 Click to view more informationTerraced Houses [539842 bytes] - Terraced House.zip
File ID: 16271 Date: 18 Mar 2007 - 480 Downloads

 Click to view more informationTerraced cottages [510714 bytes] - terrace.zip
File ID: 11217 Date: 01 Jan 2005 - 869 Downloads
Locked

Return to “[MSTS1] Route Building”