Firing Tank Engines

Learn the finer points of making your own engines and wagons!

Moderator: Moderators

Locked
spitfiresrbest
Getting the hang of things now
Posts: 90
Joined: Tue Feb 03, 2004 11:45 am

Firing Tank Engines

Post by spitfiresrbest »

Could some one be a dear and tell me where I find the fix that allows me to fire tank engines cos I dont know where it is and really want to be able to get somewhere without running out of fire
User avatar
eddief
Wafflus Maximus
Posts: 3672
Joined: Sat Dec 08, 2001 12:00 am
Location: Birmingham
Contact:

Re: Firing Tank Engines

Post by eddief »

you need to open the .eng file and find where it says, is tender required. This is likely to have (1) written after it, change this to (0.1) and it should work.
Chairman of Sir Edward Farms Construction/Train Co. relaunched 16th March 2004. Beta testing group http://groups.yahoo.com/group/Loco_Works/
spitfiresrbest
Getting the hang of things now
Posts: 90
Joined: Tue Feb 03, 2004 11:45 am

Post by spitfiresrbest »

much obliged. Thankyou :)
User avatar
wrightsie
Been on the forums for a while
Posts: 135
Joined: Sun May 05, 2002 12:00 am
Location: Cosham, Portsmouth
Contact:

try this

Post by wrightsie »

get on the footplate, ok, then you will see in the middle of the footplate a big door and it will be very hot, ok, now you pick up the large spoon{proper firemen call it a shovel!} then open the big hot door and start shoveling the black lumps with all ya might into the big white glow{if you got a good fire on} until it is almost spilling out the door, then close the door, wait for it to burn down to below the door, then fill it up to the door again!!!!!!! maybe some other cheeky . will tell you how to work the injectors!!!!!!!!!!!!!!!!!!!!!!!!!!
Steam trains an art work, not kettle boiling, welsh nuggut burning, moving scrap!!!
Locked

Return to “[MSTS1] Building Rolling Stock”