Problem with DISTANCE Signals

The MSTS 1 Route Editor can be a beast to use, but it's capable of some amazing results, here you can talk with the wizards that are building some of the fantastic routes available and learn how to make your own.

Moderator: Moderators

Locked
User avatar
sreeju444
Getting the hang of things now
Posts: 34
Joined: Sat Feb 19, 2005 5:58 pm
Location: INDIA

Problem with DISTANCE Signals

Post by sreeju444 »

I put a DISTANCE Signal in my route. All NORMAL Signals are working fine. I put DISTANCE Signal in the level crosses. When the train approach it, it is ON. That's OK. But when after train pass the signal, it is not going OFF (Like NORMAL signals) . How can I turn them off after Train pass this signal?

Sreejith
Top
User avatar
johny
Very Active Forum Member
Posts: 2609
Joined: Fri Dec 07, 2001 12:00 am
Location: N. Warks, UK.

Post by johny »

You can't. The Distant signal is telling you the state of the Stop signals between it and the next Distant on your route. The correct signal to use at a level crossing is a Stop signal.

John
Top
Locked

Return to “[MSTS1] Route Building”