Littlemoor Minature Railway

JSReeves86 · Post by **JSReeves86** » Fri May 05, 2006 9:03 pm

looking very good i like the deatil put into the junc box

twomanydjs · Post by **twomanydjs** » Tue May 16, 2006 10:16 am

I have up loaded the LMR Pack now here

File ID: 14549 Name:LMR Locos

Code: Select all

File ID: 14548 Name:LMR Activites

I have also uploaded them to my website.

Dave R

Nvincer · Post by **Nvincer** » Tue May 16, 2006 3:12 pm

LMR Locos [16003594 bytes] - LMR Locos.zip
File ID: 14549 Date: 22 May 2006 - 725 Downloads

LMR Activites [15228042 bytes] - LMR Activites.zip
File ID: 14548 Date: 22 May 2006 - 504 Downloads

twomanydjs · Post by **twomanydjs** » Fri Jun 02, 2006 10:10 am

do any one have any problems with the locos or the activites

ts2005 · Post by **ts2005** » Tue Jun 13, 2006 10:00 am

twomanydjs wrote:do any one have any problems with the locos or the activites

Yes I Have A Problem With Both I Install Them From The Zipped File But Then They Dont Work Please Could Someone Help Me back on

Track

PS. What Is Your Website

Rbridge · Post by **Rbridge** » Tue Jun 13, 2006 4:20 pm

Hmmm. Not sure about that. I had a small problem with the Signal Box activity, but I rectified this by adding a new track piece under the 'box, as the original seemed to have disappeared

. As for the other activities, and the engines, I don't know. The steamers are a quite challenging to drive, but they're fine once you've got used to them.

Does the route load on your sim in explore mode?

rwaceyw · Post by **rwaceyw** » Tue Jun 13, 2006 4:43 pm

ts2005 wrote:
twomanydjs wrote:do any one have any problems with the locos or the activites
Yes I Have A Problem With Both I Install Them From The Zipped File But Then They Dont Work Please Could Someone Help Me back on Track

PS. What Is Your Website

Any chance of expanding on 'they don't work'? We can hardly help you based just on that.

David

ruddson · Post by **ruddson** » Tue Jun 13, 2006 7:02 pm

I like the new activities and rolling stock, particularly the diesel engine start thing. All the activities work except the signal box one. MSTS just crashes. Any suggestions?

ts2005 · Post by **ts2005** » Tue Jun 13, 2006 8:29 pm

rwaceyw wrote:
ts2005 wrote:
twomanydjs wrote:do any one have any problems with the locos or the activites
Yes I Have A Problem With Both I Install Them From The Zipped File But Then They Dont Work Please Could Someone Help Me back on Track

PS. What Is Your Website
Any chance of expanding on 'they don't work'? We can hardly help you based just on that.

David

Well Once They Are Installed I Then Launch MSTS And Go To Any Activity And The Engine & Consist Box Are Blank

What Is Your Website Address Also??

Tom Smith

ts2005 · Post by **ts2005** » Tue Jun 13, 2006 8:30 pm

rwaceyw wrote:
ts2005 wrote:
twomanydjs wrote:do any one have any problems with the locos or the activites
Yes I Have A Problem With Both I Install Them From The Zipped File But Then They Dont Work Please Could Someone Help Me back on Track

PS. What Is Your Website
Any chance of expanding on 'they don't work'? We can hardly help you based just on that.

David

Well Once They Are Installed I Then Launch MSTS And Go To Any Activity And The Engine & Consist Box Are Blank

What Is Your Website Address Also??

Tom Smith

twomanydjs · Post by **twomanydjs** » Wed Jun 14, 2006 10:33 am

well i will look in to the signal box activite as it work for me when i set it all up.
To drive the steamers you just have to open the regulator to about 10% to get going then drop the cut off to about 45% and open the regulator to about 25% but do it slowly and keep an eye on the steam useage as you open the regulator cos it will jump around but then carm down to just below the generated amount.

And my website is http://www.freewebs.com/robbo25/

Hope this helps.

Dave R

fitwal · Post by **fitwal** » Wed Jul 05, 2006 10:07 pm

i have the same problem,also i have a heap of error messages that come up, reffering to the littlemoor trains/consists.any ideas, i have deleted and reloaded many times,but with no sucess.

ts2005 · Post by **ts2005** » Thu Jul 06, 2006 2:40 pm

fitwal wrote:i have the same problem,also i have a heap of error messages that come up, reffering to the littlemoor trains/consists.any ideas, i have deleted and reloaded many times,but with no sucess.

I am having the same problem

ANY HELP???

Tom Smith

Tonysmedley · Post by **Tonysmedley** » Thu Jul 06, 2006 4:23 pm

I was prompted to have another look at this route after reading the foregoing messages.
The activities all seem to run OK - after remembering to start up the small ejector. This is with full graphics and with aol internet running in the background.
But the Signal Box activity will not load. Shortly after the loading bar starts with " Setting up the simulation" I get the blue screen and Send/Don't send

Rbridge · Post by **Rbridge** » Wed Jul 19, 2006 3:38 pm

When I had the problem, I found that the Signal Box View is an engine, as im sure you all probably know.

When i went on activity editor, i found that the path used by the 'box was missing, and there was no track under the signal box either.

So i went into route editor, replaced the track, put in a new path and it worked fine.

Only problem was you had to move the Signal Box View to suit it to the 'box, so it looked realistic.

I hope this helps

Rbridge

Atomic Systems

Littlemoor Minature Railway

post subject