Narrow Gauge signals

RobertM · Post by **RobertM** » Thu Oct 21, 2004 5:11 pm

Hi all,

I was wondering how you transform Standard gauge signals into Narrow gauge signals as I would like to know so that I can re-signal the Ffestiniog railway.

Robert M

pitleyfalley · Post by **pitleyfalley** » Thu Oct 21, 2004 6:47 pm

Re-signal the FR? Why it's got complete signalling, complete working signalling last time I checked...

Id have thought using SFM to double them would be a good start...

Chris

RobertM · Post by **RobertM** » Thu Oct 21, 2004 7:56 pm

It does have complete signaling but i've added an extension and I would like to use Semaphore Signals instead of the electronic aspect signals.

chrisj94 · Post by **chrisj94** » Thu Oct 21, 2004 8:12 pm

any pics of the extension mate?

RobertM · Post by **RobertM** » Thu Oct 21, 2004 9:40 pm

I'll see what I can do.

RobertM · Post by **RobertM** » Sat Oct 23, 2004 10:05 pm

Bad news, my computer just took a turn for the worst and I forgot too back up the completed extension. I've only got a half finnished extension backed up!

:bad-words:

But does anyone still know how to make standard gauge signals big enough (or small enought, which ever way you look at it) for narrow gauge railways?

felixbicycle · Post by **felixbicycle** » Sun Oct 24, 2004 2:33 am

UMM

kevmt · Post by **kevmt** » Sun Oct 24, 2004 8:14 am

Can I just say that if anyone is thinking of altering the Ffestiniog route (for there own use only), then please remember to save the route under a new name and do not use the current Ffestiniog route namings.

Failure to do this will mean that any new Ffestiniog route patches will almost certainly not work and that work done on any extentions will most likely be lost!

Cheers
Kevin

batroost · Post by **batroost** » Mon Nov 01, 2004 10:48 pm

I'm intrigued....

Where was the extension from and to...?

Duffws?
Dinas?
Trawsfynydd?
Portmeirion?
Or the much talked-about Plas Halt to Garnedd Tunnel Cable car?

(OK I made the last one up)

Batroost

RobertM · Post by **RobertM** » Mon May 02, 2005 5:30 pm

I am writing too re-ask the question that was first asked in this forum subject because the focus has seemed too of wandered slightly from the main subject.
One change though, how do I copy the Ffestiniog signals to the Coriss Railway for MSTS, and before anyone asks I am only re-signilling because I want to have directional disks for the points, banner repeaters and 3 aspect signals, because I am planning too make an extension to the railway.
I will get some screenshots before anyone asks and it will not be for distribution unless I get permission from the original author.

RobertM

brocky · Post by **brocky** » Mon May 02, 2005 8:15 pm

This message has been edited by a Moderator

RobertM wrote: how do I copy the Ffestiniog signals to the Coriss Railway for MSTS, and before anyone asks I am only re-signilling because I want to have directional disks for the points, banner repeaters and 3 aspect signals, because I am planning too make an extension to the railway.
I will get some screenshots before anyone asks and it will not be for distribution unless I get permission from the original author.

RobertM

is that extending corris or ffestiniog
if corris then woohoo ,I have been waiting ages
will it be semi-fictional though, or will you get rid of that stuff and just concentrate on reaching machynlleth? and please dont put in any activities
that require lots of stuff. Maybe just a shuttle and a slate train using only proper corris loco's and stock instead of loads of skarloey railway *rubbish*

[Moderator Comment: pitleyfalley -

Edited to remove langauge which some might find offensive

]

This message has been edited by a Moderator

RobertM · Post by **RobertM** » Tue May 03, 2005 2:48 pm

It wil be a fictional extension from Maespoethen on the Corris, sorry if the wording was wrongand get some people confused.