AP 319 Odd Behaviour

[DescendingSadly]

Hi all
I have been using the AP 319 with no problems, the other night I decided to download the Thameslink reskin from DP Simulation. This involved copying over some files but not deleting or editing the original files in any way...

Now it seems I can't change the headlights, they're permanently stuck on red... Also in DOO mode, I can open the doors but the doors will shut when platform duties are complete automatically and then the interlock light will not come back on, meaning I can't take power. The doors in guard mode work fine and I can take power, everything else works as expected.

I have tried making different scenarios, deleting the blueprint and clearing the cache but i've had no luck so far.

Thanks in anticipation!

[749006]

Have you read this thread and the 5th post from jpt1974
http://forums.uktrainsim.com/viewtopic. ... &p=1726366

Do you have Armstrong Powerhouse's Class 319 - 325 Sound Pack installed?
The sound pack adds a couple of new features to the 319 and if you are operating DOO (driver only operation) you would need to close the doors manually by pressing 'R'. Pressing 'T' to close the doors and finish the passenger stop causes them quickly close then open again.

Does not explain the red lights though.

[david1]

Also in DOO mode, I can open the doors but the doors will shut when platform duties are complete automatically and then the interlock light will not come back on, meaning I can't take power. The doors in guard mode work fine and I can take power, everything else works as expected.

I have the same problem with the door interlock light not coming on, although all door are closed, I even checked the outside of the train on each car, my only solution is to re-employ guards to work class 319 services, head/tail lights work fine for me though

[JasVick]

You may find that the DP Simulation version has the old bin file references. If that's the case, it could cause odd behaviour as described. Try re-installing the AP pack and this should solve your issues if this is the case. The DP simulation one is probably setup for the DTG base version hense the problems that are occurring.....

[DescendingSadly]

Sorry to bump the thread but thank you JasVick for that fix, it worked perfectly.

[JasVick]

No worries. Glad it worked!