HRQ Taurus

[749006]

Having slowed down to 6kph for coupling to the train I released the brakes to couple and the loco jumped to 10kph+ and hit the stock.

What was your AFB speed set to at that moment, Peter?

And your power lever?

I had reversed toward the train at about 20kph with power about 15% to move the loco then shut off and coasted.
I slowed down as I approached the train to about 6kph and when I released the brakes the loco jumps back into power and hit's the train.
The AFB was set at 100kph and was never moved during the shunt.

I'm using the Train Brake [,] not the Loco Brake.

[jstange]

Ok, Peter, I will try to reproduce it.

Hi all,

Yesterday I posted the following on rail-sim.de, perhaps you could also try out my new cooling sound (if interested of course):

http://rail-sim.de/forum/board38-train- ... post139542

[749006]

I noticed an update to the sounds on RailSim-De
http://rail-sim.de/railsimnew/index.php ... hrq-taurus

But not tried them yet.

Peter

[jstange]

I noticed an update to the sounds on RailSim-De
http://rail-sim.de/railsimnew/index.php ... hrq-taurus

But not tried them yet.

Peter

It includes my new cooling sound mentioned above, Peter. And some other updates.

[sargnickfury]

I emailed HRQ yesterday (Saturday) to see if there was anything specific we were forgetting to do to get Multiple units to behave correctly.
The answer I received this morning (Sunday) is to make sure all the locos are facing the same direction, Apparently its in the manual,
The same answer also appeared on rail-sim.de last night.
Have tried it, and after exiting the scenario editor and playing it again it seems to have done the trick AFB holds speed and the traction needle rotates to the right on positive and left on negative traction.
I could still swear that the Circuit breaker was on when I first entered the cab though.
I'll clear cache and try again later.

Dave

I am soooo glad you posted this, I thought I was doing something wrong!

[749006]

I noticed an update to the sounds on RailSim-De
http://rail-sim.de/railsimnew/index.php ... hrq-taurus

But not tried them yet.

Peter

It includes my new cooling sound mentioned above, Peter. And some other updates.

It now seems to have disappeared

[jstange]

It now seems to have disappeared

Yes, noticed that too... have no idea what happened.

Want me to send it over to you via email? (v1.1)

[Ajay1]

It now seems to have disappeared

Yes, noticed that too... have no idea what happened.

Want me to send it over to you via email? (v1.1)

Yes, I was looking there also for it without any luck. Perhaps you could upload it here as well ?

Antony

[749006]

A few files seemed to have changed and the sound of the fans in quite loud inside the loco drowning out the sound of the horn.

I might re-download the pack and to revert the sounds the their orginal volume,

Peter

[749006]

Another new livery
http://www.railcolor.net/index.php?nav= ... tion=dview

CD Livery for the Railjet services

[jstange]

My home town and I knew nothing about this! Thanks, Peter!!!

If someone could create this repaint for the hrq taurus, would be fantastic!

[smarty2]

Would Be nice to see a Czech route to go with it, and a Polish one too.

[sargnickfury]

Anyone else having problems after upgrade to ts2014. When using AFB I will stop loco and find my dynamic breaks won't disengage. Only way to start again is too manually do so, but then the dynamic breaks won't work with AFB when I restart. Only started after TS2014, unless somehow I just didn't trigger it before.

[sargnickfury]

No one else having this issue?

[smarty2]

No one else having this issue?

I'll take a butchers, but in the meantime I suggest you e-mail the author.