Cambridgeshire Lines

[chrisreb]

Having been loking forward to this just downloaded and installed.

Ignoring the messages about missing stock when loading some scenarios that I certainly have all the skies are black.

How are others doing and what sky should be showing?

[bdy26]

Is it all scenarios or just some? If you could identify it would help to diagnose the issue.

Check you have all dependencies.

B

[chrisreb]

Is it all scenarios or just some? If you could identify it would help to diagnose the issue.

Check you have all dependencies.

B

All scenarios - have re installed and cleared cache. RW Tools says only missing assets are a sub folder in Kuju called cambs which is not present in any of the downloads. Did the RW Tools check of providers as well.

Not sure what else I can check?

UPDATE

Looked at the route info in RW Tools and saw it uses a default Time of Day from the Kuju Railsimulator Core Folder. Check the Time of Day folder and all the files had gone in this install which was the 'live' one when the big update happened the other night.

Anyway replaced them and can now see the sky - hooray!!

Can load all scenarios except the coals from Newcastle one.

[AllYourKitty]

I have discovered an issue at St Ives station with perhaps an assets mix up of sorts. I installed the 4 assets files and cleared the cache after install. There is a signal arm floating about the platform and a patch of water suspended in the air close by.

[Clemmo47]

All scenarios start ok for me but not finished any yet.Really nice atmospheric route.
Like Chris I'm missing a few Camb assets.
I havn't been through St Ives yet but I'll look out for that graphic glitsh.

[chrisreb]

Can you play the Coals to Newcastle as I just cannot get that one to load?

[Clemmo47]

Yes it runs ok but SBHH when I tried to save at one point and towards the end when I went to 8 view.
Might be the old player train. Try changing to something else.
Are these some of the missing Cambs textures in Longstanton ?

Might be a double post here. Sorry

edit
Worked ok for a long time but eventually SBHH on Coals to Newcastle.

[Iluka]

Hi Neil

What a great Route this is.

Just a few minor issues when I checked it out with RW_Tools (The Route runs just fine though)

Missing Assets
Cunningn\Cambs\environment\terrain\decals\bluntisham.bin
Cunningn\Cambs\environment\terrain\decals\ely_station.bin
Cunningn\Cambs\environment\terrain\decals\haddenham2.bin
Cunningn\Cambs\environment\terrain\decals\royston_station.bin
Cunningn\Cambs\environment\terrain\decals\wilburton.bin
Kuju\RailSimulator\cambs\cambs_1trackshed_wood.bin
Kuju\RailSimulator\cambs\cambs_brick_shelter.bin
Kuju\RailSimulator\cambs\cambs_scenario_buffer.bin
Kuju\RailSimulator\scenery\procedural\bath_temp_telegraphpole.bin

Missing Textures
UKTS_FP\Terrain_Textures\BY\Environment\Terrain\Grass\GreenGrass10.TgPcDx
UKTS_FP\Terrain_Textures\Kuju\Environment\Terrain\Grass\DarkGrass000_Wi.TgPcDx

Regards

Mike

[cunningn]

Folks

Apologies - missing folder will be replaced shortly. As usual it was all working perfectly - and then we hit the 'too many unreferenced assets for the providers' issue with some of the beta testers. To get round that I did a mammoth re-jig of assets, reduced the number of providers and then rebuilt all the packs (several times). Obviously made a screw up. I will release an additive patch rather than rebuilding yet again (so i avoid screwing up anything that already works).

Please retry after that - those who have a problem with Coals - have you loaded all of Mike's locos ?

Patch should arrive shortly.

Neil

[cunningn]

Patch just uploaded - should fix the missing assets issue.

Let me know how you get on

Regards
Neil

[Clemmo47]

Which particular ones do you mean by Mike's locos ?
I have various Assets folders so that could be a problem. However I've checked all consists carefully with RW Tools and can't see any fault.
I copied over some folders from my main UK Assets folder and reinstalled the UKTS packs.
The first problem in Coals from Newcastle is when I'm waiting for the 9.30 Cambridge to pass at Longstanton loop.Only couplings showing in any view on the passing consist.
I have checked it for missing textures and geo files.The kngtrains items usually work ok.

I've tried fixing this without result. I saved there and continued. So I'll see what happens next. Lot of SBHH on this scenario but I'm determined.
Great route btw.

[Ajay1]

Hi,
Have installed all assets files including the patch and find that I am still missing these :

E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\bluntisham.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\ely_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\haddenham2.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\royston_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\wilburton.bin

Antony

[levisham]

Only ran this 9F scenario up to the loop and had no problems at all. I'm looking forward to trying out the others.
I'm told that even after the patch there are some environmental assets still missing?
Thank you to the creators,

Regards, John.

[levisham]

Hi,
Have installed all assets files including the patch and find that I am still missing these :

E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\bluntisham.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\ely_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\haddenham2.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\royston_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\wilburton.bin

Antony

Same here but the route loads OK. The first scenario with the 9F runs OK for me but I've only been as far as the loop. I'll give the others a go in the next few days.
Regardless, thank you to the creators of this route and I'm sure the problems will get sorted out soon,

Regards, John.

[Carinthia]

Hi,
Have installed all assets files including the patch and find that I am still missing these :

E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\bluntisham.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\ely_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\haddenham2.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\royston_station.bin
E:\Steam\steamapps\common\railworks\Assets\Cunningn\Cambs\environment\terrain\decals\wilburton.bin

From http://www.uktrainsim.com/filelib-info. ... leid=30528 :
nb 'missing' station decals are missing by design

Invisible trains (just the couplings visible) seems to be some sort of Railworks/Train Simulator limitation or issue - I have seen this in other "heavy" scenarios and as a problem it pre-dates TS2013. I haven't tried that specific scenario yet.

John