Ferrovia sul confine Italia-Francia V3.0 -- released
Moderator: Moderators
-
johncoltrane
- Getting the hang of things now
- Posts: 82
- Joined: Thu Jan 06, 2011 9:53 am
- Location: Chur - Coira - Curia - Coire - SWITZERLAND
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Just saw a very very intresting discussion about SBHH messages.
http://forums.uktrainsim.com/viewtopic. ... &sk=t&sd=a
This could help some of you who have problems with my route. As soon as I have more time I will follow the instructions with RWTool and see what I can do.
Ciao, Pasquale.
http://forums.uktrainsim.com/viewtopic. ... &sk=t&sd=a
This could help some of you who have problems with my route. As soon as I have more time I will follow the instructions with RWTool and see what I can do.
Ciao, Pasquale.
- Juanillo99
- Well Established Forum Member
- Posts: 879
- Joined: Sat Oct 13, 2012 5:12 pm
- Location: Teruel - Spain
- Contact:
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Exactly, which causes the error is described by mikesimpson in that post.johncoltrane wrote:Just saw a very very intresting discussion about SBHH messages.
http://forums.uktrainsim.com/viewtopic. ... &sk=t&sd=a
This could help some of you who have problems with my route. As soon as I have more time I will follow the instructions with RWTool and see what I can do.
Ciao, Pasquale.
The RouteProperties.xml file contains Providers / Products (rolling stock) that are not used by the route and they are causing the error.
I've already solved with RW_Tools.
Thanks.
PS: In this post of my forum → http://www.ferrosim.es/viewtopic.php?p=3839#p3839 I have attached the RouteProperties.xml file corrected .
- Ajay1
- Very Active Forum Member
- Posts: 1685
- Joined: Sun Nov 02, 2008 4:37 pm
- Location: Wellington,New Zealand
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
At first when I reinstalled the new version 3-1 and the new scenario I still ended up with SBHH,but thanks to Juanillo99 I installed from his link the updated Routeproperties.xml and it now starts up no problem. The only thing is I have No Tracks, see photo below. What am I missing? for every other route I have installed everything shows up as it should. Can someone please guide me in the right direction as to what I may still need to install and from where ? Thanks !!
Antony.
Antony.
Windows 10 Home 64-bit,Intel Core i7-2600 CPU @ 340GHz,
12.00GB RAM, NVDIA GeForce GTX 660Ti
12.00GB RAM, NVDIA GeForce GTX 660Ti
- Ajay1
- Very Active Forum Member
- Posts: 1685
- Joined: Sun Nov 02, 2008 4:37 pm
- Location: Wellington,New Zealand
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Just to check, I reinstalled version 3 again together with the updated scenarioproperties.xml and the scenarios that were packaged with it and it also worked without crashing to ther desktop with SBHH, only the tracks were missing from this also. As I said before this is the only route where the tracks are missing from in my collection. See below.
Is this the case with anybody else ? or is it just mine.
Antony
Is this the case with anybody else ? or is it just mine.
Antony
Windows 10 Home 64-bit,Intel Core i7-2600 CPU @ 340GHz,
12.00GB RAM, NVDIA GeForce GTX 660Ti
12.00GB RAM, NVDIA GeForce GTX 660Ti
- davejc64
- Very Active Forum Member
- Posts: 2209
- Joined: Sun Sep 07, 2008 4:31 am
- Location: Banbury, Oxfordshire
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Another one, that's a no go for me keep getting SBHH on trying to load the route whether it be a free roam or the editor, V2.0 worked fine, beginning to wish I had stuck with that! 
"Young boys in the park jumpers for goalposts, that's what football is all about."
- Ajay1
- Very Active Forum Member
- Posts: 1685
- Joined: Sun Nov 02, 2008 4:37 pm
- Location: Wellington,New Zealand
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Try using the updated routeproperties.xml file from the link posted further up the page by Juanillo99 . Worked for me apart from the missing tracks.davejc64 wrote:Another one, that's a no go for me keep getting SBHH on trying to load the route whether it be a free roam or the editor, V2.0 worked fine, beginning to wish I had stuck with that!
Antony.
Windows 10 Home 64-bit,Intel Core i7-2600 CPU @ 340GHz,
12.00GB RAM, NVDIA GeForce GTX 660Ti
12.00GB RAM, NVDIA GeForce GTX 660Ti
-
chrisreb
- Very Active Forum Member
- Posts: 3134
- Joined: Fri Oct 17, 2008 10:48 am
- Location: Southampton UK
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Guys
I need to have the route in a separate Assets folder with some other routes for it to work. You could try that to see if that is also your problem. Always had SBHH but once in its own Assets folder worked fine.
I need to have the route in a separate Assets folder with some other routes for it to work. You could try that to see if that is also your problem. Always had SBHH but once in its own Assets folder worked fine.
- davejc64
- Very Active Forum Member
- Posts: 2209
- Joined: Sun Sep 07, 2008 4:31 am
- Location: Banbury, Oxfordshire
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Updated route propertie now loads with track missing and overhead wires, gantries there just no wires.Ajay1 wrote:Try using the updated routeproperties.xml file from the link posted further up the page by Juanillo99 . Worked for me apart from the missing tracks.
Antony.
"Young boys in the park jumpers for goalposts, that's what football is all about."
-
johncoltrane
- Getting the hang of things now
- Posts: 82
- Joined: Thu Jan 06, 2011 9:53 am
- Location: Chur - Coira - Curia - Coire - SWITZERLAND
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Hi guys.
So, what I did last night:
Checked with the newest RWTool version my route. After that, same result as you guys. No tracks. Then, I deleted the whole route, copied Juanillo 99's file and got the same result. No tracks. No, I'm back with "my" version 3.1 which of course works fine for me.
I try to find out what the problem is (missing track). Has to be a problem in the routeproperties.xml I guess. I also will follow the Mike Simpsons thread very closely. Hope to find a solution quick.
Ciao, Pasquale.
So, what I did last night:
Checked with the newest RWTool version my route. After that, same result as you guys. No tracks. Then, I deleted the whole route, copied Juanillo 99's file and got the same result. No tracks. No, I'm back with "my" version 3.1 which of course works fine for me.
I try to find out what the problem is (missing track). Has to be a problem in the routeproperties.xml I guess. I also will follow the Mike Simpsons thread very closely. Hope to find a solution quick.
Ciao, Pasquale.
- Juanillo99
- Well Established Forum Member
- Posts: 879
- Joined: Sat Oct 13, 2012 5:12 pm
- Location: Teruel - Spain
- Contact:
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
To me it is the same, with the fixed file RouteProperties.xml also disappear the tracks.
I obtained that file with the new utility of RW_Tools (version 4.0.21), and I think the RW_Tools eliminated the provider that brings the tracks.
I obtained that file with the new utility of RW_Tools (version 4.0.21), and I think the RW_Tools eliminated the provider that brings the tracks.
-
johncoltrane
- Getting the hang of things now
- Posts: 82
- Joined: Thu Jan 06, 2011 9:53 am
- Location: Chur - Coira - Curia - Coire - SWITZERLAND
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
I think the RW_Tools eliminated the provider that brings the tracks.
I think that's exactly the problem. Also some signals disappeared. I just reinstalled them again and its fine now.
But the tracks. They are taken from the Brescia-Iseo Route. As soon as I have time I'll check it out.
Thanks for the help guys.
Pasquale.
- Ajay1
- Very Active Forum Member
- Posts: 1685
- Joined: Sun Nov 02, 2008 4:37 pm
- Location: Wellington,New Zealand
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Glad wer'e getting somewhere with this as I would love to get it fixed and running. I see that the menton that the tracks are taken from the Brescia-Iseo Route. Which particular folder/Files are they in? Is it just a matter of copying these into Ferrovia? Can you let me know and I will try this to see if it fixes it. As I mentioned before all the three dependant routes that are required for Ferrovia function correctly. Listed below is what is sill missing from mine.johncoltrane wrote:I think the RW_Tools eliminated the provider that brings the tracks.
I think that's exactly the problem. Also some signals disappeared. I just reinstalled them again and its fine now.
But the tracks. They are taken from the Brescia-Iseo Route. As soon as I have time I'll check it out.
Thanks for the help guys.
Pasquale.
E:\Steam\steamapps\common\railworks\Assets\icepak\ice\lampenschein_white\lampenschein_withe_scenario.bin (Scenery Item) on tile +000002-000001.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_8link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_6link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_15link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_15link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_7link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_7link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_9link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_9link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_9link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_9link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_10link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_10link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_9link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_9link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_7link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_7link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_15link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_15link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1velaq_9link_pd.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_9link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
E:\Steam\steamapps\common\railworks\Assets\Trenomarcus\Segnali FS\railnetwork\signals\fs\1categoria&avviso\1categoria&avviso_1vela_6link_ps.bin (Track Item) on tile Tracks.bin
Guess this it the source of my problem for no tracks ?
Cheers
Antony
Windows 10 Home 64-bit,Intel Core i7-2600 CPU @ 340GHz,
12.00GB RAM, NVDIA GeForce GTX 660Ti
12.00GB RAM, NVDIA GeForce GTX 660Ti
- smarty2
- Very Active Forum Member
- Posts: 9976
- Joined: Sun Aug 21, 2005 8:16 am
- Location: 1963, at Snow Hill!
- Contact:
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
I don't think so Antony. they are signals mate.
Best Regards
Martin (smarty2)
Non technically minded individual!
Is There A God?
Dudley Bible web page
Martin (smarty2)
Non technically minded individual!
Is There A God?
Dudley Bible web page
-
johncoltrane
- Getting the hang of things now
- Posts: 82
- Joined: Thu Jan 06, 2011 9:53 am
- Location: Chur - Coira - Curia - Coire - SWITZERLAND
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Yes, Anthony, signals. You have the basic signal stock (1-5). These ones I created to have more links.... You find these signals in the TRENOMARCUS folder. Just copy it again...
So, we're getting closer.
The missing tracks are in this folder:
--> Pedro --> Brescia-Iseo --> Binari
These tracks were installed with the installation of the Brescia-Iseo Route.
There is a .rwp file in the installation file of Brescia-Iseo:
Assets_Bs-Iseo_Pedro.rwp
The tracks (and many other objects) should be in this .rwp file
Maybe you have to try to deinstall "Assets_Bs-Iseo_Pedro.rwp" first, clear caché, and then install it again.
I'm at work and later at a Restaurant, so dont think I have time tonight to try it out...
Ciao, Pasquale.
So, we're getting closer.
The missing tracks are in this folder:
--> Pedro --> Brescia-Iseo --> Binari
These tracks were installed with the installation of the Brescia-Iseo Route.
There is a .rwp file in the installation file of Brescia-Iseo:
Assets_Bs-Iseo_Pedro.rwp
The tracks (and many other objects) should be in this .rwp file
Maybe you have to try to deinstall "Assets_Bs-Iseo_Pedro.rwp" first, clear caché, and then install it again.
I'm at work and later at a Restaurant, so dont think I have time tonight to try it out...
Ciao, Pasquale.
- Juanillo99
- Well Established Forum Member
- Posts: 879
- Joined: Sat Oct 13, 2012 5:12 pm
- Location: Teruel - Spain
- Contact:
Re: Ferrovia sul confine Italia-Francia V3.0 -- released
Hello.johncoltrane wrote:The missing tracks are in this folder:
--> Pedro --> Brescia-Iseo --> Binari
Hello.
I have reviewed the RouteProperties.xml with Notepad++ after having modified it with RW_Tools and the lines that reference the tracks have not been removed, so the tracks should appear on the route.
But no, the tracks still do not appear.
Something weird is happening.
PS: I have the route Brescia-Iseo installed and working properly.
