Change Albula V2b in 1435mm gauge(?)

[RRD890890]

Does anyone know, is there any method to change
the 1000mm gauge track of MickeAr's Albula line V2b
to 1435mm track gauge?

[StefanSchmidt]

Yes, there is away:
Tutorial replacing track at the homepage of RW-Tools: http://www.rstools.info/index.html
Good luck.
Stefan

[RRD890890]

Yes, there is away:
Tutorial replacing track at the homepage of RW-Tools: http://www.rstools.info/index.html
Good luck.
Stefan

Dear Stefan:
I have follow the instruction of the tutorial,
after I use the "railnetwork\track\hsc_track_main.xml" to replace the" railnetwork\tracks\matrackmain.xml",
all the original "matrackmai" were disappear.



what's happen for this?
Could you help me again?

thanks a lot!!!!

[Toldrabald]

Have you ticked the HSC folder? You need to enable the other route so that the tracks are loaded.

In the editor click on the blue square in the 2nd flyout and on the right side you have to select RSC from the drop down menu and set the mark at Horseshoecurve (or just HSC, not sure).

[RRD890890]

Have you ticked the HSC folder? You need to enable the other route so that the tracks are loaded.

In the editor click on the blue square in the 2nd flyout and on the right side you have to select RSC from the drop down menu and set the mark at Horseshoecurve (or just HSC, not sure).

Thanks for your help.

yes, i have tick the HSC folder, but there is still no track are loaded....
and, when i "select" the "invisible" track, the properties window on right are show "multiple trackrules" ....
what's happen....?

[StefanSchmidt]

The changing of tracks are a little bit tricky. Tracks are needing a trackrule, this trackule has to be named in the tracks.bin.
Mikes' sample is changing tracks of one Trackrule. So he can use the same one.
Search for trackrule(s) in the Tracks.bin. And change this Trackrule(s) (+Provider and Product <-- to be tickt in the object filter) to an trackrule which contains all of your new used tracks.
May be there is a trackrule delivered with the tracks, or you have to create an own.
After changing you have to clear the cache before starting the Route.
Good Luck
Stefan

[RRD890890]

Thanks for you all~! The problem have been solve~!