Problem with LU sounds.

[Bulman91]

I'm currently creating an activity using the D78 stock on the WCML, however, no sounds at all will work, the train is completely silent, although when I use the D78R stock, the sounds do work, it's really confusing me, and as I'm not really the cleverest person in the world, can anyone help me?

Another problem regarding the LU stocks, the C69 stock, when I try and use that, the sounds work, but when I try and move forward or backwards, it barley moves, as if the breaks are stuck on, can anyone help me with this too?

[jbilton]

Hi
I can't remember.... but they might work on different MSTS settings.
Cheers
Jon

[Bulman91]

My sound settings are on high, would that make any difference?

[jbilton]

Hi
No .....should be OK then.

Cheers
Jon

[Bulman91]

Do you have any idea why the C69 stock is barley moving? It takes me twenty seconds just to get up to 10mph

[jbilton]

Do you have any idea why the C69 stock is barley moving? It takes me twenty seconds just to get up to 10mph

Might be bin patch related.... as they are seperate engines.... some patches don't allow the adding of power from other than the lead car.



I've just checked the 73 stock .... and I have the sounds in the folder "1973_TUBE_STOCK" .... the 73 refurb stock is aliased to those sounds.

However a while back I change the sounds to scalability level 0 , so the excellent sounds were used by AI trains.
(So I can't be sure what level they were set at to start with)

===============================================

SIMISA@@@@@@@@@@JINX0x1t______

Tr_SMS (

Skip ( ***** LUR engine sounds for LUL 73TS underground train by Jimi Ibbett ***** )
Skip ( ***** Based on live recordings by Picc I/Op "Doc" ***** )

ScalabiltyGroup( 0
Activation ( ExternalCam () CabCam () PassengerCam () Distance (1000) )
Deactivation ( Distance (1000) )
Volume(1.0)
LoadAllWaves ( 1 )
Streams ( 7


--------------------------------------------



Cheers
Jon

[Bulman91]

With regards to the C69 stock, it is .bin related. And I'm still unsure on how to fix this. Grrrr

And so what should I do for the D78 stock? I only recently downloaded the 73 stock too.

[mstsrocks]

With regards to the C69 stock, it is .bin related. And I'm still unsure on how to fix this. Grrrr

And so what should I do for the D78 stock? I only recently downloaded the 73 stock too.

Hey.
To me it sounds like you need to go to the rear cab put once in there put the reverser to reverse then put train brakes to neutral.Once you have done that go back to the leading cab and try moving as i got this problem often. after cab swapping to go in the other direction

EDIT sorry i mean try the above for the C69 stock to try get it moving.

Simon

[Bulman91]

I have tried what you said and it has made no difference.

I went to the rear cab, put the reverser in reverse, and then the train breaks to neutral, then went back to the leading cab and still the same problem occures.

[mstsrocks]

I have tried what you said and it has made no difference.

I went to the rear cab, put the reverser in reverse, and then the train breaks to neutral, then went back to the leading cab and still the same problem occures.

Hmmmmmm not sure about this it may be the ENG file maybe the max power isnt high enough? did you create the consist your self?

im also in the download que to download because im not a premium member will take a while but once its downloaded ill run it and see if i have the same problem. EDIT in fact im now downloading from train-sim.com as i found it on there

Simon

[Bulman91]

I have tried a consist I have made myself and the consists which come with the download its self, both of which have the same problem.

I tell you something, I'd love to see an A stock on here!

[mstsrocks]

Hello.
OK i have just been messing around with the eng file "LUC69RDMcircle.eng" and have changed a few things and now it speeds up faster. for me

open up the eng and locate the following:

Engine ( LUC69RDMcircle
Wagon ( LUC69RDMcircle )
Type ( Electric )
MaxPower ( 250kW#est )
MaxForce ( 200kN#est )
MaxContinuousForce (30kN#est )
DieselEngineSpeedOfMaxTractiveEffort( 7.50 )
MaxVelocity ( 40mph )
MaxCurrent ( 1000A )
WheelRadius ( 0.915m )
Sanding ( 1e9mph )
NumWheels ( 1 )

you need to change your original "max force numbers in the brakets" to what the red font says to the ones in the red font then it should then speed faster. but i edit other things aswell but im sure this is what needs to change.

Simon

[Bulman91]

I have done exactly what you said, and it speeds up a tiny bit faster, but nothing in comparison to the D78 stock, and it's still taking ages to get up to 10mph, and it struggles to get above 25mph.

[mstsrocks]

OK ill have another go a bit later or likely tomorrow

Simon

[Bulman91]

Okay, thank you!