Missing Shape Files
Moderator: Moderators
Missing Shape Files
Having (with quite a few difficulties - not connected with X-Tracks!) I seem to have some missing files. The route in question is Pentecosta V2. At some locations the simulation freezes with error reports. The two which re missing are "A2t20mStrt.s" and "A1t0_2mStrt.s". I have X-Tracks version 3.18 installed, and the latest version of T section.dat. Any ideas where I could find these files???
- emrhd01
- Very Active Forum Member
- Posts: 4805
- Joined: Thu Aug 03, 2006 1:48 pm
- Location: Nottingham- East Bridgford
Re: Missing Shape Files
Hi Woggit,
I believe those files are Track.
You say that you have Xtracks 3.18 loaded, the latest Xtracks is on the front page and is 3.20. If Pentecosta V2 is a recent Route this may require 3.20.
http://www.uktrainsim.com/filelib-info. ... leid=14093
Load it and give it a try.
I believe those files are Track.
You say that you have Xtracks 3.18 loaded, the latest Xtracks is on the front page and is 3.20. If Pentecosta V2 is a recent Route this may require 3.20.
http://www.uktrainsim.com/filelib-info. ... leid=14093
Load it and give it a try.
Rob.
Proud to be a member of the VW/SSS BETA Testing Team.
Proud to be a member of the VW/SSS BETA Testing Team.
Re: Missing Shape Files
Thanks for your reply Robert. I had (slowly) realised that the missing files were X-Tracks track section data. Before installing the latest vesion I had a lot of missing files reported. After posting this message on this forum, I did the obvious - e-mailed the author of the route!! I will try the new version of X-Tracks.
Re: Missing Shape Files
I have found a solution to this problem & post it here in case any one else meets the same problem. The solution is on the "Train-Sim" American website. The file in question IS an X-Tracks file, but is obsolete. It apparently caused problems with some lineside shapes such as posts & gantries. The solution is to take the file A1t0_3mStrt.s and ite equivalent '.sd' file; copy them and then re-name them as A1t0_2Strt.s and so on. The tracks inquestion are 0.2 metres and 0.3 metres long. The difference is 10cms!. It may not satisfy purists, but the route works!!!
Re: Missing Shape Files
Actually, according to the Xtracks author as well as the STD Global TSection.dat, the A1t0_2mStrt was never a part of Xtracks:woggit wrote:The file in question IS an X-Tracks file, but is obsolete.
http://forums.flightsim.com/vbts/showth ... 7#poststop
As an interim measure:
http://forums.flightsim.com/vbts/showth ... ost1369175
After much searching about, I finally located the original and perhaps the rest of "Dietmar Jülich's" track collection:
http://forums.flightsim.com/vbts/showth ... 7#poststop
Search for "Kai Schadeberg" or "RWger_91.zip" at http://www.the-train.de.
EDIT: Don't use the TSection.dat in "RWger_91.zip".

regards,
charlie
- jtiffin
- Well Established Forum Member
- Posts: 892
- Joined: Thu Sep 06, 2007 9:43 pm
- Location: Welling, Kent
Re: Missing Shape Files
Mine is working okay.
- ashgray
- Wafflus Maximus
- Posts: 12148
- Joined: Sun Jan 09, 2005 3:25 pm
- Location: GWR, Nailsea, Somerset
Re: Missing Shape Files
Not helpful Andrew, since the poster's obviously isn't!jtiffin wrote:Mine is working okay.
Ash
Ashley Gray
Intel Core i7-7700K @ 4.2Ghz Quad Core, Gigabyte Gaming Motherboard, 2 x 512Gb SSDs + 1TB SATA drives,
16 Gb DDR-4 Corsair RAM, Nvidia GeForce GTX1060 6Gb RAM, ASUS Xonar D2X/XDT Soundcard, Windows 10 64 bit
Intel Core i7-7700K @ 4.2Ghz Quad Core, Gigabyte Gaming Motherboard, 2 x 512Gb SSDs + 1TB SATA drives,
16 Gb DDR-4 Corsair RAM, Nvidia GeForce GTX1060 6Gb RAM, ASUS Xonar D2X/XDT Soundcard, Windows 10 64 bit
-
- New to the Forums
- Posts: 1
- Joined: Wed Aug 19, 2009 6:49 pm
Re: Missing Shape Files
Hi guys, I am new here.
I have a problem, I am building a track and I need a4t750r shape file, but I cant find it in shapes file in my GLOBAL. But it is written in tsectin.dat file. Can someone please help me?
I have Xtracks 3.20
P.S. Sorry for my english, I am from Slovakia
I have a problem, I am building a track and I need a4t750r shape file, but I cant find it in shapes file in my GLOBAL. But it is written in tsectin.dat file. Can someone please help me?
I have Xtracks 3.20
P.S. Sorry for my english, I am from Slovakia
-
- Getting the hang of things now
- Posts: 44
- Joined: Sat Sep 08, 2007 10:41 pm
Re: Missing Shape Files
@IceMcLarenIceMcLaren wrote:I have a problem, I am building a track and I need a4t750r shape file, but I cant find it in shapes file in my GLOBAL. But it is written in tsectin.dat file. Can someone please help me?
Oops. You are right. It looks like these shapes were missing in the xtracks package.
I have compiled these four track shapes for you: (click)
Please note: If you want to share your route with others, make sure that these files will be available with your route. Because all standard xtracks users might miss it like you did before.
Best regards
nordicbear