North East Rails V3.1 release & Scenario pack info.

[whittaker]

Hows it going ,Did you manage to get the latest copy . Iv altered the manuals ready to put update out.

joe

Abit late with reply been abit busy.Anyway got the latest update installed and resumed that backworth V3 scenario but still got same lockup after the level crossing.I seem to remember you said you had removed all the cars from the road but I still had a couple drive upto the level crossing and vanish as I reached it.All abit strange as it works ok in 32bit.I wouldn't worry about it Joe just one of those things.

Thanks Newbouy

Thanks for the time you and Richard put in on this scenario ,had enough and iv deleted it now.

[rikwesson]

Hello Joe, I hope you reconsider ditching the no.3 scenario. As I have said, the road, level crossing and vehicles have never been a problem, however the corn field before the pit heap was where it kept crashing for me. Now you have changed that it sails past that point with no problems. As I said I would do yesterday, I have removed the stop at Backworth reverse point after collecting the extra wagons and just put in an instruction to pull forward and then couple up to the wagons you brought up. All worked fine and I got a tick. This is a lovely scenario, too good to ditch. Thanks for the signals as well.

Richard

[whittaker]

Hello Joe, I hope you reconsider ditching the no.3 scenario. As I have said, the road, level crossing and vehicles have never been a problem, however the corn field before the pit heap was where it kept crashing for me. Now you have changed that it sails past that point with no problems. As I said I would do yesterday, I have removed the stop at Backworth reverse point after collecting the extra wagons and just put in an instruction to pull forward and then couple up to the wagons you brought up. All worked fine and I got a tick. This is a lovely scenario, too good to ditch. Thanks for the signals as well.

Richard

Could leave it in with a note to save at regular intervals as other users have had problems with it freezing I guess.

[markpullinger]

Hi Joe, Would it be worth looking at Riks version so you can see what he's done/ use that version?

[rikwesson]

Deleted my last post as I misread what you wrote, but as I say, get rid of that second stop at Backworth Reverse point, and just put in a message to say hook up to the original wagons. I save wherever possible anyway, but certainly put it in the instructions

Richard

[whittaker]

Deleted my last post as I misread what you wrote, but as I say, get rid of that second stop at Backworth Reverse point, and just put in a message to say hook up to the original wagons. I save wherever possible anyway, but certainly put it in the instructions

Richard

right iv reworked it a bit and will keep it in ,removed that second instruction and altered some of the messages ,the one mentioned and the one at the end now tells you which siding to use to return to the signalbox. also iv swapped the loco for the default Mardy loco .Did a full run with it with no problems..

And iv added a note to the manual to make regular saves.

PS thanks for the input Mark.

Joe

[whittaker]

Update 3.7 is now on the site,this gives the route some alterations to signals and some new variants along with some scenery tweaks.
The Scenario pack have had an update as well adding another 5 scenarios and some alterations to the existing ones.

Il just mention the updates will not break the great Belux trains scenario packs as there has been no track alterations.

Another thank to the community members for testing and advice.

Joe Whittaker

[august1929]

Well done Joe - top notch work - what an immersive route (network!) and collection of scenarios.

Rod

[sbowness]

Congratulations on getting the latest version out, Joe.

I'm just trying to run the Morpeth Stopper part 1. The requirements say that I need the DTG Class 105 and the destination mod that has the Fletcher BR Blue 105 in it. The scenario has the path as DTG\Class105Pack01\RailVehicles\Diesel_rf\Engine\ but I think it should be \DTG\Class105Pack01\RailVehicles\Tyneside\Engine as I can see a nd Tyneside version there.

Also, I'm missing the BR 5 plank wagons karma99\Addon\RailVehicles\Freight\BR 5 plank\BR 1\ which don't appear in the requirements. Where can I get those from, please?

[FoggyMorning]

I think these could be the wagons?

BRITISH RAILWAYS 5 PLANK WAGONS [5273586 bytes] - BR 5 plank wagons.zip File ID: 23557 Date: 26 Mar 2010 - 2967 Downloads

[whittaker]

Congratulations on getting the latest version out, Joe.

I'm just trying to run the Morpeth Stopper part 1. The requirements say that I need the DTG Class 105 and the destination mod that has the Fletcher BR Blue 105 in it. The scenario has the path as DTG\Class105Pack01\RailVehicles\Diesel_rf\Engine\ but I think it should be \DTG\Class105Pack01\RailVehicles\Tyneside\Engine as I can see a nd Tyneside version there.

Also, I'm missing the BR 5 plank wagons karma99\Addon\RailVehicles\Freight\BR 5 plank\BR 1\ which don't appear in the requirements. Where can I get those from, please?

You need both DTG 105 and the destination mod ,the player train is made up of a blue and green mixed set.the scenario starts in one end and you swap to the other to head north.
Pritty sure those 5 plank wagons get installed as part of the freeware packs but if I’m wrong it will be the ones above,sure iv downloaded them before aswell.

[sbowness]

Thanks for getting back to me Joe. I've got that installed. I've just checked the path in the package and it's definitely Assets\DTG\Class105Pack01\RailVehicles\Tyneside\Engine\. The scenarios manual also says that the mod is in the route pack when it's actually a separate download (UKTS40219) unless it's been updated since I downloaded it, or I'm going bonkers - which is a distinct possibility.

@FoggyMorning, thanks for finding the wagons.

[whittaker]

Thanks for getting back to me Joe. I've got that installed. I've just checked the path in the package and it's definitely Assets\DTG\Class105Pack01\RailVehicles\Tyneside\Engine\. The scenarios manual also says that the mod is in the route pack when it's actually a separate download (UKTS40219) unless it's been updated since I downloaded it, or I'm going bonkers - which is a distinct possibility.

@FoggyMorning, thanks for finding the wagons.

No problem Stephen ,Hope you got it installed. I should have worded it slightly different and added the id number. ukts40215

joe

[Kernow2]

Bit late coming to the party - but it's definitely one worth attending !
I've been tripped up by a 'missing' Class 56101 which should be residing in my RSC Class 56Pack01_RF_Sectors folder. I have the AP enhancement, and the VP Enhancement enhancement (!) but no 56101.
Read on a older post there were problems finding a 56101 file before. Anyone like to enlighten me as to where it can be found or if I need it at all?
Thank you.
G.
Amazing route - thank you so much for your hard work and generous gift to the community Joe !

[choccy]

I've been tripped up by a 'missing' Class 56101

You will find it here http://www.trainsimdev.com/forum/downlo ... 36dab#code

Mark