Atomic Systems

Hi

I am trying to substitute an AP Class 37 into a scenario and probably getting the loco details wrong in the editor. I have something like 37093;Config=x;bogie=cp7;no1front=split_hco_door;no2front=split_hco_door;no1hl=hc;no2hl=hc. Would some kind person point out where I am getting the syntax wrong please so I can do it right in the future.

This gives me a driveable loco but no lights and no bogies

Managed to drop one in from pre set selection box but would be nice to know what I should be doing

rkk01 wrote:Oh wow, that really is something...

Hard to believe, but I’m pretty sure this is the first time for proper WR green or blue 37s since I got a copy of TS

So it's going to stick out like a sore thumb with an odd color, is that what you mean and is that really a good thing.

gptech wrote:

smarty2 wrote:I do, he's on my ignore list, same old drivel never anything salient or new to say.

If he's on ignore, how do you know what he's posted?

That's exactly what sprung to my mind, how?

chrisreb wrote:Hi

I am trying to substitute an AP Class 37 into a scenario and probably getting the loco details wrong in the editor. I have something like 37093;Config=x;bogie=cp7;no1front=split_hco_door;no2front=split_hco_door;no1hl=hc;no2hl=hc. Would some kind person point out where I am getting the syntax wrong please so I can do it right in the future.

This gives me a driveable loco but no lights and no bogies

Managed to drop one in from pre set selection box but would be nice to know what I should be doing

Config needs to equal something like "Late70sUnrefurb".

chrisreb wrote:Hi

I am trying to substitute an AP Class 37 into a scenario and probably getting the loco details wrong in the editor. I have something like 37093;Config=x;bogie=cp7;no1front=split_hco_door;no2front=split_hco_door;no1hl=hc;no2hl=hc. Would some kind person point out where I am getting the syntax wrong please so I can do it right in the future.

This gives me a driveable loco but no lights and no bogies

Managed to drop one in from pre set selection box but would be nice to know what I should be doing

The manual fully explains how locos/variants should be numbered in the editor.

gptech wrote:

rkk01 wrote:this is the first time for proper WR green or blue 37s

What does "proper" mean?

https://www.bbcamerica.com/anglophenia/ ... ranslation

Proper is most commonly associated with job to form proper job, which is used to refer to anything that is done well. Your new car is proper job just as much as a very tasty meal made for you by a loved one or an item of work that has been performed properly

Or, in the case of WR allocated Cl37s, this will be the first time in my use of the sim that I will be able to use a correct BR blue 37 on china clay, or on S Wales coal, steel or iron ore trains.... same applies to the Canton based green era 37s.

Incredibly, I to the plunge on TS with TS2009, and IIRC the Class37Pack01 was pulled from Steam when TS2009 was launched??? That’s over 10 years...!!!

Yes, E-G and S&C had good centre box 37 models, but they never seemed to attract the attention of reskinners to BR blue / green

rkk01 wrote: this will be the first time in my use of the sim that I will be able to use a correct BR blue 37 on china clay, or on S Wales coal, steel or iron ore trains.... same applies to the Canton based green era 37s.

OK, but my initial query wasn't really one regarding the meaning of the word per se, but just what is it in the livery/loco that's different?

rkk01 wrote:Yes, E-G and S&C had good centre box 37 models, but they never seemed to attract the attention of reskinners to BR blue /

Reskins for the discontinued 37 are easily ported over to both those models, there's really only the ETH box to tweak.

Reskins for the discontinued 37 are easily ported over to both those models, there's really only the ETH box to tweak.

The ETH box is only the start of it - the RSC refurbished 37 used on S&C, E&G, Portsmouth etc is totally unauthentic for BR green and blue liveries.

rwaceyw wrote:the RSC refurbished 37 used on S&C, E&G, Portsmouth etc is totally unauthentic for BR green and blue liveries.

Which is what I'm asking...why?...what's wrong with it?
And I suppose it'd be handy to know if there's any 37 at all that'd suffice?

locomotiveman1994 wrote: It just annoys everyone.#

They have an opinion and if you disagree then ignore it don't decide that its not for everyone. Hes right too AP have become way too expensive in my opinion.

God, i love reading through an AP product announcement thread! The speed with which it degenerates is frightening!!

Purely as an aside, i have both Volumes 1 & 2 and i think that they are fantastic, and i hope that AP release the WIPAC, Brush cab and /9 variants at some point. Just my humble opinion though you understand .

Cheers
Terrone.

OK..back on topic.
It ain't cheap. Enough reason to wait for a sale if you don't have the old RSC pack, maybe enough to give it a miss if you do.
Like the previous AP 37, superb modelling, great textures and I presume good sounds. Has anybody reported the issues that some had/have with the 50 being too quiet in relation to other locos for this?

One thing this pack brings is Blue Class 37's with a Headcode Panel in both split box and full versions

RSC did a Split box 37 - In Green with a Headcode panel and in Blue without but I have not see a Blue version with - until now.

Peter

749006 wrote:One thing this pack brings is Blue Class 37's with a Headcode Panel in both split box and full versions

RSC did a Split box 37 - In Green with a Headcode panel and in Blue without but I have not see a Blue version with - until now.

Peter

I've had this since no later than June 2015:

gptech wrote:I've had this since no later than June 2015:

In which add-on was that released?
Or is it in the UKTS Files?