AP Class 37 Vol 2

Jimmerz · Post by **Jimmerz** » Thu Aug 27, 2020 4:46 pm

Is anyone else having any difficulties with the part 1 of the 2D45 16:50 Norwich - Lowestoft scenario. The route won't reset after the 150 arrives at Norwich therefore I'm unable to start as the points are always against me, all the usual tricks don't work, tabbing etc.

Cheers,

James

peteskink · Post by **peteskink** » Thu Aug 27, 2020 5:03 pm

AP updated the pack on 21st August:

Underside shadow fixed in fog. 1S76 & 16:50 Norwich -
Lowestoft scenarios fixed. Missing NRN radio texture
fixed. Wonky cab fixed.

I assume this is the 16:50 scenario mentioned?

Jimmerz · Post by **Jimmerz** » Thu Aug 27, 2020 5:13 pm

Cheers Pete, it's been a busy few days so didn't think to check for updates, d'oh! On the job now!

Cheers,

James

peteskink · Post by **peteskink** » Thu Aug 27, 2020 6:06 pm

Hope it works for you!

tchouftchouf · Post by **tchouftchouf** » Thu Aug 27, 2020 6:29 pm

About Class 37, did some of unreburbished ones had been fitted with radio and RETB for use on Kyle Line?

Jean-Louis

dave13 · Post by **dave13** » Fri Aug 28, 2020 9:23 am

tchouftchouf wrote:About Class 37, did some of unreburbished ones had been fitted with radio and RETB for use on Kyle Line?

Jean-Louis

Yes class 37s 37025/035/114/183/260/261/262/263 & 264 were all based at Inverness.
You can have them in blue or revised blue and have them retb fitted by putting ;datacord=retb in the loco number.
Hope this helps.
Dave:)

tchouftchouf · Post by **tchouftchouf** » Fri Aug 28, 2020 10:43 am

Thank you Dave. Did they have NRN radio and antenna too?
I am working on reskin to replace JT Class 37 on Kyle Line. I made 33011, 37033 and 37112 liveries.

Jean-Louis

dave13 · Post by **dave13** » Fri Aug 28, 2020 11:27 am

tchouftchouf wrote:Thank you Dave. Did they have NRN radio and antenna too?
I am working on reskin to replace JT Class 37 on Kyle Line. I made 33011, 37033 and 37112 liveries.

Jean-Louis

The model has NRN radio, however I don't know about the real thing.
As I'm not sure when the NRN radio was introduced.
Their is no antenna fitted to the model in br blue and revised blue.
Well I haven't seen one. lol

Dave:)

brysonman46 · Post by **brysonman46** » Fri Aug 28, 2020 2:24 pm

dave13 wrote:
tchouftchouf wrote:Thank you Dave. Did they have NRN radio and antenna too?
I am working on reskin to replace JT Class 37 on Kyle Line. I made 33011, 37033 and 37112 liveries.

Jean-Louis
The model has NRN radio, however I don't know about the real thing.
As I'm not sure when the NRN radio was introduced.
Their is no antenna fitted to the model in br blue and revised blue.
Well I haven't seen one. lol

Dave:)

According to https://en.wikipedia.org/wiki/Radio_Ele ... oken_Block it was 1984

tchouftchouf · Post by **tchouftchouf** » Fri Aug 28, 2020 6:24 pm

If someone is interested to test,
37025,37035,37114,37183,37260,37261,37262 and 37264 with NRN and RETB.
You need AP Class 37 locomotive pack vol 2.

Any comments will be welcome.

JL

http://www.mediafire.com/file/a7p3td113 ... 26_RETB.7z

rikwesson · Post by **rikwesson** » Fri Aug 28, 2020 7:23 pm

I have just been using the new pack and the windows seem very dark, almost black like it has tinted windows. Does anyone else have this?

Richard

rikwesson · Post by **rikwesson** » Sat Aug 29, 2020 10:29 am

I have been in touch with AP, who suggested turning off RW Enhancer. That made a big difference, so now do I have to have the Enhancer off all the time I use the 37's (and maybe all AP stuff) or is there a set up in the Enhancer to stop darkening the windows? Or is it an AP issue?

Richard.

peterfhayes · Post by **peterfhayes** » Sat Aug 29, 2020 10:25 pm

: Blackened windows Class 37 Vol 2 AP

: Blackened windows Class 37 Vol 2 AP

Richard
I had not seen this effect before - I use RWEnhancer Pro.
The effect that I was seeing in the Class 37 Vol 2 was when viewing from OUTSIDE the cab - the windows were darkened.
Looking from the inside out seemed "normal"
I checked the Class 37 Vol 1 and that was lighter than this new pack.
I looked at several AP models and certainly some of the cab windows appeared dark when viewed from outside.
As I spend 99% of my simming time in the cab the effect doesn't bother me.

pH

exrailwayman01 · Post by **exrailwayman01** » Sat Aug 29, 2020 11:16 pm

I've just been driving the BR blue loco and the windows look OK to me Rik, I can see the back wall anyway. I don't know if this depends on which model you are driving, as Peter illustrates, or, if you have any 3rd party mods activated, I haven't got anything special open, so, sorry, can't really help you any further.

Cheerz. Steve.

rikwesson · Post by **rikwesson** » Sun Aug 30, 2020 9:45 am

Thanks for the replies, Steve that's how mine looks without RW Enhancer, is yours with or without? Peter I haven't used vol.1 for a couple of weeks so will check that out later. AP did say to me that all their add-ons are calibrated to be used without RW Enhancer.

Richard.

P.S. Yes Peter, I can confirm that windows in vol.1 are definitely lighter than the vol.2 locos.

Atomic Systems

AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2

Re: AP Class 37 Vol 2