Atomic Systems

smarty2 wrote:if you have the 150 pack or the AP upgrade

I don't have the AP upgrade, but using the default FGW 150/1 produces the same 'out of fuel' error after swapping with RW Tools for me. However, I had no bother dropping into the editor and shoving the slider for each coaches fuel along so they had enough fuel.
As I wrote initially, it happens sometimes when swapping DMUs.

I got a full blown crash when changing all the 170 services for the 150!

Like it a lot, but the in cab horn sound seems very loud to me

Steve

willtilston567 wrote:Has anyone else had problems with the AWS reset?
I'm Driving along, AWS go's off I press Q and Nothing happens. so i repeatedly pressed Q sometimes it works sometimes it doesn't.
I just want to see if its just me before i raise a ticket at AP
Apart from that little Niggle its a good pack, it makes DTG 150 a usable model
cheers Will

Yes, I'm getting the exact problem, sometimes it works, sometimes it don't - at least this is the case when driving in passenger view via the HUD

Out of interest, are you also driving in the passenger view via the HUD?

smarty2 wrote:I got a full blown crash when changing all the 170 services for the 150!

Don't think it is an error with the class 150, could be a bug in either RW or RW_tools, I have had that problem on other routes if I try swapping out a unit for the class 101. I have found if I edit the route manually for the 101 it works fine but not using RW_Tools

david1 wrote: could be a bug in either RW or RW_tools,

or user error, or an issue caused by the system's configuration..... With the 101 did you swap powered vehicles for non-powered ones, or vice-versa?

Does anyone know how to switch the passenger cabin lights on?... My train is in complete darkness when driving in night time scenarios!

orange24 wrote:Does anyone know how to switch the passenger cabin lights on?... My train is in complete darkness when driving in night time scenarios!

It uses the standard key - as mentioned in the manual (page 9)

Peter

orange24 wrote:Does anyone know how to switch the passenger cabin lights on?... My train is in complete darkness when driving in night time scenarios!

Yeah "o" as in oh not zero.

scorpion71 wrote:

willtilston567 wrote:Has anyone else had problems with the AWS reset?
I'm Driving along, AWS go's off I press Q and Nothing happens. so i repeatedly pressed Q sometimes it works sometimes it doesn't.
I just want to see if its just me before i raise a ticket at AP
Apart from that little Niggle its a good pack, it makes DTG 150 a usable model
cheers Will

Yes, I'm getting the exact problem, sometimes it works, sometimes it don't - at least this is the case when driving in passenger view via the HUD

Out of interest, are you also driving in the passenger view via the HUD?

Yes i am Driving with the HUD but from outside or the Cab

scorpion71 wrote:

willtilston567 wrote:Has anyone else had problems with the AWS reset?
I'm Driving along, AWS go's off I press Q and Nothing happens. so i repeatedly pressed Q sometimes it works sometimes it doesn't.
I just want to see if its just me before i raise a ticket at AP
Apart from that little Niggle its a good pack, it makes DTG 150 a usable model
cheers Will

Yes, I'm getting the exact problem, sometimes it works, sometimes it don't - at least this is the case when driving in passenger view via the HUD

Out of interest, are you also driving in the passenger view via the HUD?

This might happen if you're driving at a very low frame rate. What sort of frame rate are you running at?

phat2003uk wrote:

scorpion71 wrote:

willtilston567 wrote:Has anyone else had problems with the AWS reset?
I'm Driving along, AWS go's off I press Q and Nothing happens. so i repeatedly pressed Q sometimes it works sometimes it doesn't.
I just want to see if its just me before i raise a ticket at AP
Apart from that little Niggle its a good pack, it makes DTG 150 a usable model
cheers Will

Yes, I'm getting the exact problem, sometimes it works, sometimes it don't - at least this is the case when driving in passenger view via the HUD

Out of interest, are you also driving in the passenger view via the HUD?

This might happen if you're driving at a very low frame rate. What sort of frame rate are you running at?

Averages about 40-50.

AWS is fine in cab, I'm just wandering if it's something to do with the delay, in cab you hear the click once you go over the AWS magnet then a second or two later you hear the alert, does this somehow affect the display HUD on timing? I only get the issue whilst driving in passenger view on HUD view.

Since you are here Richard, is it somehow possible to get the AWS sound within passenger view? You can hear it in real-life (ok, the nearer to the cab you are) - I like driving in passenger views and hearing in-cab alert sounds (such as AWS and DVD) in this view would be most helpful.

Thanks.

Ahh yes, that shall be it. The HUD displays the warning straight away but you won't be able to cancel it until a second after it appears there.

Shall take on-board what you've said regarding alerts in the passenger view.

AP just released an update to the pack. Here's the text from the Facebook post and the accompanying image:

"Class 150/1 Enhancement Pack V1.1 Update:

- New Northern livery
- Side door interlock lights fixed
- Driver Vigilance Device (DVD) fitted to FGW livery
- Brake lever now controllable with mouse
- Information about transmission simulation added to manual
- 'Bits and Bobs' section added to manual which covers small features which might otherwise be missed or even cause confusion

To obtain this update, simply re-download the main pack from your 'Downloads' area and the extra stock pack/branding patch from the product page."

Image:

I'm finding an unusual situation in that I have never had a problem installing AP product however on this occasion all I have are the couplings. Now this is often down to the geoPcDx files being missing and I'm not sure how the stock in the included scenarios references these files. I'm confused as to why I am not seeing the stock. Richard, Help, please

Regards

Michael