1A08 0509 Plymouth - London Paddington

[gonzo2431]

nope, just a hangover from the route when it was started, its trying to reference the decals that have long since been removed. the folders have been switched off and deleted for a long time now, but are not required in any way for WML to run (or Chiltern for that matter)

[gptech]

Ben, as those *missing* decals show in LogMate immediately prior to the crash they can't be discounted as part of the problem. OK, conventional wisdom states that missing decals don't matter, but on a route that's pushing many systems to the edge it can't be discounted that in this case the pause introduced by the game looking for those assets is just enough to throw the whole thing 'up the left'.

Rod, use the Route Checking routine in RW Tools to remove the references for those decals from the route, after making a backup of course.

[august1929]

Rod, use the Route Checking routine in RW Tools to remove the references for those decals from the route, after making a backup of course.

Will do Gary - results this morning...a large route and running very slowly through RWTools

Rod

[august1929]

The only Ben Garfirth Assets identified as missing by RWTools are the following;

BenGarfirth\Source\Environment\Terrain\Decals\Radley X1 Y3.bin
BenGarfirth\Source\Environment\Terrain\Decals\Didcot X2 Y1.bin
BenGarfirth\Source\Environment\Terrain\Decals\Didcot X1 Y1.bin
BenGarfirth\Source\Environment\Terrain\Decals\Bic2 X18 Y04.bin
BenGarfirth\Source\Environment\Terrain\Decals\Bic2 X18 Y03.bin
BenGarfirth\Source\Environment\Terrain\Decals\Bic1 X08 Y3.bin

Interestingly they are only Decals and are "BenGarfirth" Assets, not "Ben Garfirth" (with a space).

Rod

[J1o2h3n4]

Hi all,
well I cannot get this scenario to load up either. Just non stop CTD's.
So I have posted some screenshots of Logmate recordings, in case some with far superior knowledge can work out what is(is not) going on.
Regards JohnT

[FrankJ]

I had a crash every time I loaded the Scenario but with Logmate discovered that although owned my AP Class 150 sound Pack was not loaded. The Scenario then loaded but with an error stating that 1S37 Plymouth - Edinburgh not connected to a destination - Plymouth Platform 6

Deleting the consist lets the Scenario Run but I am then Stuck on Plymouth Platform 4

[MrHillingdon]

I've only tried to run the scenario once and I also had the error relating to 1S37 Plymouth to Edinburgh.

Regards,

Paul

[tubemad]

Hmm I think I might delete 1S37 and see how people get on. When I tested it 1S37 stormed by as I left Laira, and no signal issues either. 1S37 is shared by a static at Plymouth P6.

In the logmate above I see theres something about the S7 stock, not sure why as this was provided in the add-on...

EDIT - I seem to have forgotten to add the FGW plain blue and GWR Green class 165 reskin requirements

[FrankJ]

I could not find FGW plain blue so swapped it out with RWTools

[tubemad]

I could not find FGW plain blue so swapped it out with RWTools

Class 166 - First Great Western Plain Blue Reskin [12076115 bytes] - Class 166 - First Great Western Plain Blue.zip File ID: 34855 Date: 20 Feb 2016 - 1011 Downloads

[FrankJ]

Thanks but sorry it was the 150 I was looking for

[tubemad]

The Class 150/1 comes with FGW Plain Blue by default does it not?

[tubemad]

Awaiting approval, re-uploaded file with V1.1

- Removes 1S37
- Updated requirements.

I've added this as a possible requirement:

Invalid File ID [36672]

Not sure if it makes the odd's difference, I did install it but never tried it, I used the 150/1 for AI instead but sounds like a bus when it passed me as AI so I'm not sure if it is installed correctly, so you may or may not need it

[gptech]

The physics and sound patch shouldn't be necessary, as it doesn't change the location of any .bin file for the stock. I'm not sure off the top oif my head, but as it references a file or two from the Thomson 150 that may need to be enabled in the Provider/Product list to get the full effect---Chris will know better than I.

[chrisonline]

The physics and sound patch shouldn't be necessary, as it doesn't change the location of any .bin file for the stock. I'm not sure off the top oif my head, but as it references a file or two from the Thomson 150 that may need to be enabled in the Provider/Product list to get the full effect---Chris will know better than I.

Correct . . . the 150/1 Physics & Sound Patch isn't REQUIRED to make it work, but highly recommended! However it requires you to own the Thomson-Oovee 150/2, but does not need the 150/2's Provider/Product box to be checked in the scenario editor,