North East Rails (extended)

[whittaker]

Another scenario uploaded ,
This time a trip working to Jarrow with a heavy oil train .

Joe

[niallquinn1971]

Cheers Joe!

Thanks.

[749006]

I was getting a bit irritated with this route as some signals did not clear or give any indication to wait when I tried TAB but it said I had a SPAD when I finished the scenario.

Peter

[whittaker]

I was getting a bit irritated with this route as some signals did not clear or give any indication to wait when I tried TAB but it said I had a SPAD when I finished the scenario.

what scenario would that be in Peter.

[749006]

It's from Belux Trains in Scenario pack 3 - #24 From the sea to London (part 1)

I came across 3 signals during the trip which did not clear and I tabbed passed all three but at the end of the trip on Gateshead it said there had bee a SPAD.
It's a strange scenario dumping a passenger train in the middle road at Newcastle

Peter

[kennyb]

Hi joe, downloaded the Jarrow tanks when it became available, then got struck down with a dreaded bug, so only yesterday managed to run it !!!!. Very well done and enjoyable, only minor problem, on the description as you leave Tyne Yard, you say taking loaded tanks to Jarrow and bring back empty, in the F1 instructions however, you have it correct.
.
Keep them coming always very enjoyable
.
Ken

[whittaker]

Sorry for the late reply Peter ,
i haven't got any of the scenario packs installed at present so cant comment on how they operate on the new version as there was a lot of changes made from version 1 ,this may have had an impact on old scenarios.

Im busy trying to make some new ones of my own when time permits.

At the moment there are 3 including the one released with the route.


joe

[malkymackay]

One of the most distinctive pieces of rolling stock that operated in the North East will soon be available in the library, as I have modeled the Iron Ore hoppers that ran between Tyne Dock and Consett from 1954 to 1974.

56t Iron Ore Hopper [15603531 bytes] - 56t_Iron_Ore_Hopper.zip File ID: 36546 Date: 09 Feb 2017 - 735 Downloads

[TOMMO79]

Been looking forward to these making an appearance, Glad I bought the 9F now

[TransportSteve]

Lovely wagons Malky, many thanks.

Incidentally, for any scenario developers, you may find the attached information handy for train consists, they are from old WTTs of the trains from the 1950s using 9Fs, and then if you scroll further down you can find WTTs from 1970 using Class 24 diesel locos, up to 1974, when the trains stopped running from Tyne Docks and a new traffic flow commenced from Redcar to Consett with new wagons and 2xClass 37 haulage.

http://www.derbysulzers.com/24102.html

Cheerz. Transport Steve.

[whittaker]

Consett Ore (part.1) is waiting approval.

This is the first part of a run up to Consett from Tyne Dock using a pair of class 24s and Malcolms excellent 56 ton hoppers (still cant beleave it ).

Due to time ive had to split it into to parts ,this one up to Tyne yard and ill have a go at the climb up to Consett next weekend if time permits .

Big thanks to Malcolm Mackay for creating these iconic wagons.

Joe Whittaker

[whittaker]

Consett Ore part.2 on there now

http://steamcommunity.com/sharedfiles/f ... =866137047

enjoy

joe whittaker

[pastymuncher]

Many thanks. I enjoyed the first part so was looking forward to this. This, along with Ay Valley, NE rails and North Lincolnshire is one of my favourite routes. Many thanks to Malkymackay for the hoppers and many other excellent models too.

[J1o2h3n4]

Hi,
came to play the " Consett Ore Part two. All went well until I came to the first yard, where I noticed the bridge carrying the high level track was missing it's stone work. Remembering I had turned my Graphics down to try and eliminate previous problems with an Aye valley scenario, I reset all back to previous settings. Repeating the scenario from the start and now this stonework re-appeared. But later on spotted the same problem whilst doing some of the scenarios produced by
BLXT (04) the same thing occurred (see attachment).

System info :- Alienware Aurora\Win 10 Home vers10.0.14393 \ i7 930@2.8Ghz 4 core\16Gb RAM\Virtual Mem32Gb\Av Physical Mem 12Gb Graphics settings as per attachments.

Thanks JohnT

[malkymackay]

I suggest that you adjust your scenery density to maximum. If the asset doesn't show at that setting, then you do have an issue, and not just being affected by the density value that the asset had assigned when placed in the route editor.