Atomic Systems

As usual I need some help to get them moving, I have followed these instructions, 1 turn master key on shift+W 2, press W 3 to put in nuetral 3 cancel AWS,press Q,4 turn off tail lamp Press M turn on ,turn off DRA press y
after all that nothing happens the amps just stay on zero,the panto-graph is up so should be picking up the current

I'm using expert mode F4 HUD

Mike

Might sound silly but have you also put the reverser into forward? A screenshot of the cab controls when you're trying to move would be very helpful too! Thanks .

Anybody else having problems installing, just loaded up Kings Cross to Leeds scenario and I have no train just coupling and air pipes, tried reinstalling and cleared the cache, then looked in the Class 91 folder no geometery files have been copied over from the default.

david1 wrote:Anybody else having problems installing, just loaded up Kings Cross to Leeds scenario and I have no train just coupling and air pipes, tried reinstalling and cleared the cache, then looked in the Class 91 folder no geometery files have been copied over from the default.

Re-run the .exe file to reinstall. I have found in the past that running through once doesn't always fully transfer all Geo files. If your installation is not in the default location, make sure the correct path is selected.

chrisonline wrote:Re-run the .exe file to reinstall. I have found in the past that running through once doesn't always fully transfer all Geo files. If your installation is not in the default location, make sure the correct path is selected.

Run exe file three times and even renamed my railworks folder to Railworks to see if that works, I know some `bat` files only work on the default location, but know geo files have copied, I have just copied them over myself to all folder and now reload it.

It will make you ears bleed when it's flat out. Not sure the sound is right there, I'd imagine a lot of issues with health and safety if it's like that in real life.

One little issue,

APC91EP: 1Y05 05:25 Newcastle - London King's Cross, the "MK4 RSB H East Coast AP" buffet van is showing "Missing texture". I tried verifying game files + reinstalling the soundpack and extra stock, but still the same. How can I fix this?

I think it is absolutely brilliant. If you're sat on the fence, please go and get this pack - you'll not be disappointed .

Obligatory test run on Totham route, looks and sounds awesome!!!!!

37114 wrote:It will make you ears bleed when it's flat out. Not sure the sound is right there, I'd imagine a lot of issues with health and safety if it's like that in real life.

Would have thought that the sounds is correct, as AP have recorded it, but I would not know never been in the cab of a 91, but standing at the front of a mk4 you can hear the motors more than you can with your head out of a mk3 behind a 90 which are very quite, don't see why driver should complain, the motor coach of say a class 321 is a noisy but that ok for passengers, but it does sound good, likewise a voyager unit is noisy for the passengers and they sound arwful.

david1 wrote:

37114 wrote:It will make you ears bleed when it's flat out. Not sure the sound is right there, I'd imagine a lot of issues with health and safety if it's like that in real life.

Would have thought that the sounds is correct, as AP have recorded it, but I would not know never been in the cab of a 91, but standing at the front of a mk4 you can hear the motors more than you can with your head out of a mk3 behind a 90 which are very quite, don't see why driver should complain, the motor coach of say a class 321 is a noisy but that ok for passengers, but it does sound good, likewise a voyager unit is noisy for the passengers and they sound arwful.

Eh it should sound good as ap recorded a record record a class 91 so why would I tenor not sound like a class 91.

Also voyagers are not noisey from the passengers compartment there quiet as there sound proofed

LundeSDK wrote:One little issue,

APC91EP: 1Y05 05:25 Newcastle - London King's Cross, the "MK4 RSB H East Coast AP" buffet van is showing "Missing texture". I tried verifying game files + reinstalling the soundpack and extra stock, but still the same. How can I fix this?

Redownload the pack. Known issue .

I initially had trouble with missing Geo files but having done a bit of detective work I think this may be due to the fact that I had previously extracted the *.ap file from my Class91Addon folder and had deleted the original *.ap file. I hasten to add this is only in my working copy of TS - I keep a clean version without any modifications etc.

The installation of the Class 91 pack puts a batch file (InstallMe.bat) into the root of Assets. I struggle trying to interpret these files but this is clearly intended to copy the Geo files over for the different liveries and I think it may the case that if you run this without the original Class 91 *ap file being present it doesn't do anything.

I copied back to my working copy of TS the original RSC Class91Addon folder (with*ap file) then ran Armstrong Powerhouse installer and all then appears to be fine. What I haven't got at present are the other re-skins for the 91, DVT and stock which will now need re-instating, or replacing with the new AP ones, in order for quite a few scenarios to work - but I am not tackling that tonight!

Hope this helps.

Regards

Peter

david1 wrote:

37114 wrote:It will make you ears bleed when it's flat out. Not sure the sound is right there, I'd imagine a lot of issues with health and safety if it's like that in real life.

Would have thought that the sounds is correct, as AP have recorded it, but I would not know never been in the cab of a 91, but standing at the front of a mk4 you can hear the motors more than you can with your head out of a mk3 behind a 90 which are very quite, don't see why driver should complain, the motor coach of say a class 321 is a noisy but that ok for passengers, but it does sound good, likewise a voyager unit is noisy for the passengers and they sound arwful.

I think maybe the levels are maybe a tad too high. It really made my ears hurt even after I turned it down quite a bit. Not been in a real one myself so no idea if it is accurate but if it is I wouldn't fancy earning a living driving them!

Awesome, absolutely love it!
In cab sounds seem just perfect to me, as does everything else about this pack!