vR BR 101 EL
Moderator: Moderators
Re: vR BR 101 EL
Yes i know about that problem. It actually doesn't come from the AFB systen but from the ZSoll calculation. There was implemented a threshold to smooth it a bit, but ends up in a logical problem within the whole regulation proccess. I try to solve that.
Re: vR BR 101 EL
Just to add that the AFB system is fantastic compared with all other Loks!
It is very smooth and keeps you within 1 Km/h of your VSoll (not the usual 4-5 of other Loks).
I would rather keep this bug than make it less smooth and accurate!
Thanks for all your hard work,
Fantastic product, I bought all 3!
Neil
ps. could you possibly do a BR189 and BR146 next?
It is very smooth and keeps you within 1 Km/h of your VSoll (not the usual 4-5 of other Loks).
I would rather keep this bug than make it less smooth and accurate!
Thanks for all your hard work,
Fantastic product, I bought all 3!
Neil
ps. could you possibly do a BR189 and BR146 next?
- holzroller
- Very Active Forum Member
- Posts: 4421
- Joined: Sat Jun 13, 2009 11:00 am
- Location: NE Scotland
Re: vR BR 101 EL
Haven't had a chance to try them, but as I have both it wouldn't give me an error, did you take a look at the ICE version in case he has simply named them wrongly.smarty2 wrote:Installed the IC version and it threw up a missing ICE 101! Checked the readme and it says the IC version?holzroller wrote:Scenario with opiton of either ICe version or IC version http://rail-sim.de/forum/wsif/index.php ... -HH/#files
-
tnleeuw01
- Very Active Forum Member
- Posts: 2493
- Joined: Sat Oct 08, 2011 11:17 am
- Location: Diemen, Netherlands
Re: vR BR 101 EL
Took it for a test-ride on Lübeck-Hamburg last night, didn't yet try out the LZB systems but had a very smooth ride with the AFB! Very happy with lok!
--Tim
--Tim
Re: vR BR 101 EL
This scenario requires a lot of additional (paid) addons. Mostly from TTB. I purchased TTB Scenario Pack 1 & 2 (2x20 Euro) but still missing lots of assets.smarty2 wrote:Installed the IC version and it threw up a missing ICE 101! Checked the readme and it says the IC version?holzroller wrote:Scenario with opiton of either ICe version or IC version http://rail-sim.de/forum/wsif/index.php ... -HH/#files
Frankly, I don't know what for so many various wagons. When I drive, I concentrate mostly on signals and speed. The variety of passing trains don't bother me at all. The same effect can be obtained with the standard rolling stock, included in the Train Simulator itself.
Tried to switch the missing rolling stock with RW_Tools, but gave up, since there are tens of static wagons.
Adam
-
tnleeuw01
- Very Active Forum Member
- Posts: 2493
- Joined: Sat Oct 08, 2011 11:17 am
- Location: Diemen, Netherlands
Re: vR BR 101 EL
Oh myself I absolutely get a lot more immersion if there is a lot of different, and realistic-feeling, AI in a scenario. Makes it all a lot more immersive for me.
Also, wagons of good-enough quality - some of the old Kuju/DTG German rolling stock is really ugly.
The TTB stock also has the advantage of being low-poly.
Everyone their own preference of course - but that's what works for me at least!
--Tim
Also, wagons of good-enough quality - some of the old Kuju/DTG German rolling stock is really ugly.
The TTB stock also has the advantage of being low-poly.
Everyone their own preference of course - but that's what works for me at least!
--Tim
-
tycoonkid9
- Well Established Forum Member
- Posts: 524
- Joined: Mon Jul 14, 2014 3:48 am
Re: vR BR 101 EL
If the 101 IC used then the BR120 IC should not be required for rolling stock.
- smarty2
- Very Active Forum Member
- Posts: 9976
- Joined: Sun Aug 21, 2005 8:16 am
- Location: 1963, at Snow Hill!
- Contact:
Re: vR BR 101 EL
Swapped it with RWTools, it probably is the wrong file mixed up?holzroller wrote:Haven't had a chance to try them, but as I have both it wouldn't give me an error, did you take a look at the ICE version in case he has simply named them wrongly.smarty2 wrote:Installed the IC version and it threw up a missing ICE 101! Checked the readme and it says the IC version?holzroller wrote:Scenario with opiton of either ICe version or IC version http://rail-sim.de/forum/wsif/index.php ... -HH/#files
Best Regards
Martin (smarty2)
Non technically minded individual!
Is There A God?
Dudley Bible web page
Martin (smarty2)
Non technically minded individual!
Is There A God?
Dudley Bible web page
- holzroller
- Very Active Forum Member
- Posts: 4421
- Joined: Sat Jun 13, 2009 11:00 am
- Location: NE Scotland
- holzroller
- Very Active Forum Member
- Posts: 4421
- Joined: Sat Jun 13, 2009 11:00 am
- Location: NE Scotland
Re: vR BR 101 EL
There are now repaints appearing on a daily basis on railsim.de
Re: vR BR 101 EL
Repaints are nicely to have, but be aware of their memory consumption. Each of it needs about 200Mb of additional Ram. These packs are not built to be a massivly AI rolling stock to flood a scenario. This just gives the well known dump errors. If you just use one loco from the pack, even if it is a repaint, then all will be fine. But after installing 20 repaints and using all of it in one scenario, it will dump of course. Just to let you informed about that.
- holzroller
- Very Active Forum Member
- Posts: 4421
- Joined: Sat Jun 13, 2009 11:00 am
- Location: NE Scotland
Re: vR BR 101 EL
From FB
Updates for all BR101 packages are available for download now. Just redownload the packages from your customer account and install it over the exsisting files.
Changelog:
- Some fixes on 3D models an textures
Br101:
- Outer opened windows on cab 2 fixed
- MFA Display lamps are working after a resume now
- MFA Display circuit braker lamp now worling
- pzb fixed
- LZB fixed and improved
- Kwh display on the MTD now able to display numbers above 999
- Complete rework of the regulation systems
- Traction motors sounds more pleasant
- AI sound improved
Wagons:
- Brake force reduced
- Apmbzf passenger view lights and sounds fixed
- MET wagon numbers on the doors fixed
- Apmbzf and Bpmbdzf IC raindrops fixed
... and many other little changes.
Updates for all BR101 packages are available for download now. Just redownload the packages from your customer account and install it over the exsisting files.
Changelog:
- Some fixes on 3D models an textures
Br101:
- Outer opened windows on cab 2 fixed
- MFA Display lamps are working after a resume now
- MFA Display circuit braker lamp now worling
- pzb fixed
- LZB fixed and improved
- Kwh display on the MTD now able to display numbers above 999
- Complete rework of the regulation systems
- Traction motors sounds more pleasant
- AI sound improved
Wagons:
- Brake force reduced
- Apmbzf passenger view lights and sounds fixed
- MET wagon numbers on the doors fixed
- Apmbzf and Bpmbdzf IC raindrops fixed
... and many other little changes.
Re: vR BR 101 EL
Great, thanks for the heads-up!!!
Re: vR BR 101 EL
Yes ,thanks for the info.
But if you're in a hurry forget it, just took 25mt to D/L 238 Mb from their site.
Suffice to say did get it though, thanks Vr for the update.
Regards JohnT
But if you're in a hurry forget it, just took 25mt to D/L 238 Mb from their site.
Suffice to say did get it though, thanks Vr for the update.
Regards JohnT
Re: vR BR 101 EL
It's not a server problem. Server is able to deliver full 100Mbit, even at this time. So seems your provider is badly connected to the german backbone net.