DT Class 43 patch released

anthonye · Post by **anthonye** » Fri Oct 09, 2015 5:51 pm

Just download and installed the 43xx patch

Reverser is the same, dampers are back to front, M closes them shift M opens.
When stood idling there is the old "ballon" effect coming out the chimney like the M7 had when that was released until patched, frame rates suffer bad.
No animations of the injectors still.

Not on facebook so could not put it there.

edit
The smoke seems to be ok when the loco is selected, so that's not a problem. The reverser notches seem to be around the selected settings, so perhaps the minimum is 33%, perhaps someone could say about this is it like that on the real loco.

Anthony

rfletcher72 · Post by **rfletcher72** » Fri Oct 09, 2015 6:47 pm

Nowt to do with HST's then

,

anthonye · Post by **anthonye** » Fri Oct 09, 2015 6:49 pm

rfletcher72 wrote:Nowt to do with HST's then ,

Don't get it ?

Anthony

Fenrir · Post by **Fenrir** » Fri Oct 09, 2015 6:54 pm

Your problem could be that it isn't a patch but a full brand-new version; if you have both installed there could be an issue.

If this is the case, I suggest removing both using Package Manager and then reinstalling the V1.1 only.

This is what i did and it seems fine to me.

anthonye · Post by **anthonye** » Fri Oct 09, 2015 6:57 pm

Fenrir wrote:Your problem could be that it isn't a patch but a full brand-new version; if you have both installed there could be an issue.

If this is the case, I suggest removing both using Package Manager and then reinstalling the V1.1 only.

This is what i did and it seems fine to me.

Yes did all of that, so whats the min of the forward reverser your getting, 33 here. Also noticed that the advanced mode is not working, there is no delay in opening the regulator to when it moves.

Anthony

Yamsi · Post by **Yamsi** » Fri Oct 09, 2015 7:19 pm

anthonye wrote:
rfletcher72 wrote:Nowt to do with HST's then ,
Don't get it ?

Anthony

The BR Inter-City 125 power cars (HST's) are Class 43

Yamsi

Fenrir · Post by **Fenrir** » Fri Oct 09, 2015 7:37 pm

anthonye wrote:
Fenrir wrote:Your problem could be that it isn't a patch but a full brand-new version; if you have both installed there could be an issue.

If this is the case, I suggest removing both using Package Manager and then reinstalling the V1.1 only.

This is what i did and it seems fine to me.
Yes did all of that, so whats the min of the forward reverser your getting, 33 here. Also noticed that the advanced mode is not working, there is no delay in opening the regulator to when it moves.

Anthony

I'm getting 28% minimum forward gear.

gptech · Post by **gptech** » Fri Oct 09, 2015 8:19 pm

Yamsi wrote:
anthonye wrote:
rfletcher72 wrote:Nowt to do with HST's then ,
Don't get it ?

Anthony
The BR Inter-City 125 power cars (HST's) are Class 43

Yamsi

and here's me getting all excited about a Warship......

anthonye · Post by **anthonye** » Fri Oct 09, 2015 8:33 pm

Oh, l see, sorry

Bit slow

Anthony

atlasduff47 · Post by **atlasduff47** » Sat Oct 10, 2015 11:32 am

anthonye wrote:
Bit slow

Anthony

I hope you are referring to the kettle and not the HST, which are still pretty nippy!

Atomic Systems

DT Class 43 patch released

DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released

Re: DT Class 43 patch released