WCML London and Midlands

chrisonline · Post by **chrisonline** » Mon Mar 13, 2017 9:04 pm

tubemad wrote:No I don't, that'll be why then!!

Do you have the situation where some signals are red as you approach and turn green as you get to them? That was also a symptom of the older CommonLibrary signals on newer routes (I think it may have been a TS2016 issue). As stated, buying any newer JT route (or updating one if you have overlooked it) should fix it

Alex55 · Post by **Alex55** » Mon Mar 13, 2017 10:46 pm

tubemad wrote:No I don't, that'll be why then!!

Thanks alex55, I only put the message up in case, wording it as if you do see any, just pass it at danger, if not then assume NR have fixed the problem

My pleasure

I'll put a little note in user comments

.

I thinks it's about time I had a another look to see if I can further reduce dependencies for the route.
There are so many individual scenery items that have been sourced from multiple DLC's.
I'm sure I could remove a couple. I'll start with SECML

johnrossetti · Post by **johnrossetti** » Fri Mar 24, 2017 2:40 pm

I'm so taken with the detail of this route I have created a scenario for a trip from Euston to Watford on the DC Lines, before I post it would someone like to test it for me please to make sure Ive followed all the instructions correctly and included the correct files.
Thanks John
PS its a very busy scenario !

Alex55 · Post by **Alex55** » Fri Mar 24, 2017 7:43 pm

johnrossetti wrote:I'm so taken with the detail of this route I have created a scenario for a trip from Euston to Watford on the DC Lines, before I post it would someone like to test it for me please to make sure Ive followed all the instructions correctly and included the correct files.
Thanks John
PS its a very busy scenario !

Hi John.
I'll gladly have a look at your scenario.
You can email it to tunnelvision@live.com
Andy

johnrossetti · Post by **johnrossetti** » Fri Mar 24, 2017 10:13 pm

Thanks Andy, Its on it's way.
Cheers John

Bulbi83 · Post by **Bulbi83** » Wed Apr 05, 2017 2:07 pm

Hello all,

I search this two files, please :

Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin
Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin

Thanks advance for your help

gptech · Post by **gptech** » Thu Apr 06, 2017 8:59 am

Bulbi83 wrote:Hello all,

I search this two files, please :

Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin
Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin

That's just one file, so your search is half way over before you've begun

You'll find the missing .bin file, plus the others that the .bin calls for (the track cross-section and textures, and the files for the buffers) at https://ln.sync.com/dl/d494ff5b0/xsmxbg ... 5-d23vp9un
Just extract the contents of that .zip archive into your Railworks directory.

Alex55 · Post by **Alex55** » Thu Apr 06, 2017 9:03 am

Bulbi83 wrote:Hello all,

I search this two files, please :

Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin
Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin
Thanks advance for your help

"Rusty Rails" folder, included in UKTS 36021 (with installation instructions)

Hope this helps

Alex55 · Post by **Alex55** » Thu Apr 06, 2017 9:11 am

gptech wrote:
Bulbi83 wrote:Hello all,

I search this two files, please :

Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin
Assets\RSC\BrightonMainLine\RailNetwork\Track\track01_conc_Rusty-Rail_Buffer.bin

That's just one file, so your search is half way over before you've begun

You'll find the missing .bin file, plus the others that the .bin calls for (the track cross-section and textures, and the files for the buffers) at https://ln.sync.com/dl/d494ff5b0/xsmxbg ... 5-d23vp9un
Just extract the contents of that .zip archive into your Railworks directory.

Sometimes it's just a case of read the installation instuctions !

"WCML L&M V4 (UKTS file ID 36021)
If you have a previous version of West Coast Main Line London and the Midlands
(including photons66's WCML Assets):
Copy the "Content" folder into your Railworks folder.
This version has a new GUID number and will run along side any previous versions.
For the route to display correctly, you will also need to have the "rusty rails" patch installed .
This is included in this download (with installation instructions) , if needed."

gptech · Post by **gptech** » Thu Apr 06, 2017 10:12 am

Instructions are for wimps!!!

In Bulbi's defence though, going by his initial post I'd guess he isn't a native English speaker, or reader, so that mitigates things a wee bit.

Of course it doesn't excuse me for not properly checking if the file was included.....

nike wass · Post by **nike wass** » Tue Apr 25, 2017 5:01 pm

Hi All
Can any one please tell me from what route are the overhead gantries and wires used from I am having a problem with them not showing up. I am sorry if this has been asked before
Regards
mike

Alex55 · Post by **Alex55** » Mon May 01, 2017 9:55 am

nike wass wrote:Hi All
Can any one please tell me from what route are the overhead gantries and wires used from I am having a problem with them not showing up. I am sorry if this has been asked before
Regards
mike

Thompson WCML Trent Valley

Springer6 · Post by **Springer6** » Mon May 01, 2017 11:16 am

johnrossetti wrote:I'm so taken with the detail of this route I have created a scenario for a trip from Euston to Watford on the DC Lines, before I post it would someone like to test it for me please to make sure Ive followed all the instructions correctly and included the correct files.
Thanks John
PS its a very busy scenario !

I'm really looking forward to this scenario ! As a matter of interest which DC stock have you used. As far as I can tell the DC route includes parts of the Bakerloo line with London Overground overlaid on it from Queens Park to Harrow and Wealdstone. The Overground then runs by itself from Harrow and Wealdstone to Watford Junction.

The Bakerloo line uses the deep tunnel low roofed 1972 stock and the Overground uses 378s. We have the 378 ( North London route) and a substitute 1972 could be the TFL repaint of the RSDL 483.

One point of interest with this mixed stock on one route is that in real life at Wembley Central for example, the platform is a bit too high for the 1972 stock and a bit too low for the 378s. Hence the "Mind the Step" notices as well as the usual "Mind the Gap ".

nike wass · Post by **nike wass** » Mon May 01, 2017 2:51 pm

Hi All
I have taken the route of, as I am having problems, hopefully someone can help me. The original route ended up with no signals. The latest update when I loaded and tried to run I had the opposite all the signals but no gantries ore overhead wires. I have all the items that are needed. I would like to get the route up and running, I anyone can help
Regards
Mike Wass

Alex55 · Post by **Alex55** » Mon May 01, 2017 7:08 pm

nike wass wrote:Hi All
I have taken the route of, as I am having problems, hopefully someone can help me. The original route ended up with no signals. The latest update when I loaded and tried to run I had the opposite all the signals but no gantries ore overhead wires. I have all the items that are needed. I would like to get the route up and running, I anyone can help
Regards
Mike Wass

Hi Mike.
Sorry to hear that you're having problems.
If you'd like to emal me, I'm sure I could get things sorted out for you.
Andy
tunnelvision@live.com

Atomic Systems

WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands

Re: WCML London and Midlands