Core PAtch this afternoon

General discussion about Train Simulator, your thoughts, questions, news and views!

Moderator: Moderators

User avatar
Traveller54
Very Active Forum Member
Posts: 2877
Joined: Mon May 15, 2006 11:13 am
Location: Once of Derby, now in Warrington, UK
Contact:

Re: Core PAtch this afternoon

Post by Traveller54 »

gptech wrote:Use Windows Explorer to navigate to the ..\\Steam\steamapps\common\railworks\data\videos\2013_startup.ogv file and rename it by adding .default to the end (or anything else that makes sense to you) and in the ..\\Steam\steamapps\common\railworks\data\videos\ folder create a new, blank text document. Rename this blank document to 2013_startup.ogv (make sure you don't leave the .txt extension on there, as has happened to some who had known file extensions hidden) and you'll not see the video again until there's an update or you verify the games files.
I'd suggest copying your new 0 byte 2013_startup.ogv file and renaming this copy by adding something like .blank to the end so if you find it gets over-written it's very easy to revert back.
Thanks again fro your help G!!
[Intel i5-8600K+3.60GHz/16Gb DDR4/NVidia GeForce GTX 550ti 4Mb/1 x SATA3 120Gb SSD, 3xSATA3 2Tb/Win10 Ultimate 64bit]
Trav ..... :-)
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
gptech
Very Active Forum Member
Posts: 19585
Joined: Fri Oct 10, 2008 5:48 pm
Location: Wakefield, West Yorkshire

Re: Core PAtch this afternoon

Post by gptech »

Going back to jimmy's issue....
jimmyshand wrote:an auto update is unavoidable as soon as I turn on my PC.
I'm not a fan at all of having programs start up automatically when the PC boots. Besides taking resources away from loading the OS it does allow for such 'stealth' updates.
As Dave said earlier, bit late now to start re-configuring, your only option really is to revert back from a backup copy, if you have one; or failing that, if your Steam installation is in a protected area, going back to a *working* state using Windows Restore. Quick way to check is to right click the Railworks folder, choose 'Properties' and then click the 'Previous Versions' tab. If you have a restore point containing the pre-update files it'll show there.

EDIT: You're welcome Trav, I have that little snippet in a text file of 'useful stuff' so wasn't a big job to copy and paste :lol:
User avatar
DaveDewhurst
Very Active Forum Member
Posts: 1994
Joined: Wed Nov 28, 2007 10:21 am
Location: Birkenhead
Contact:

Re: Core PAtch this afternoon

Post by DaveDewhurst »

jimmyshand wrote:You need to go online in order to turn Steam offline! As soon as you go online to turn it offline
No you don't, IIRC as long as Steam has been online and logged in as you at least once on your machine previously you can go offline without going online.

Just tested it and it works how I thought.
Restart PC, Disconnect, start steam and am presented with the option of starting in offline mode, games all run fine (except any multiplayer or server oriented games obviously)

Dave
User avatar
Traveller54
Very Active Forum Member
Posts: 2877
Joined: Mon May 15, 2006 11:13 am
Location: Once of Derby, now in Warrington, UK
Contact:

Re: Core PAtch this afternoon

Post by Traveller54 »

DaveDewhurst wrote:
jimmyshand wrote:You need to go online in order to turn Steam offline! As soon as you go online to turn it offline
No you don't, IIRC as long as Steam has been online and logged in as you at least once on your machine previously you can go offline without going online.

Just tested it and it works how I thought.
Restart PC, Disconnect, start steam and am presented with the option of starting in offline mode, games all run fine (except any multiplayer or server oriented games obviously)
Dave
Make sure 'Steam' is not running.
If you put a 'Steam' icon on to the task bar and start it from there you get an option to either start On or Off line - choose off and then minimise the screen and start TS2014. I have a notification icon show in the bottom right corner to show Steam is active.
[Intel i5-8600K+3.60GHz/16Gb DDR4/NVidia GeForce GTX 550ti 4Mb/1 x SATA3 120Gb SSD, 3xSATA3 2Tb/Win10 Ultimate 64bit]
Trav ..... :-)
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
User avatar
ightenhill
Very Active Forum Member
Posts: 1938
Joined: Wed Aug 27, 2008 3:48 pm
Location: Back home in London

Re: Core PAtch this afternoon

Post by ightenhill »

Well so much for the scenario ticks patch.. Mine have all disappeared again this morning
Image
jimmyshand
Very Active Forum Member
Posts: 2391
Joined: Fri Sep 02, 2005 8:08 am

Re: Core PAtch this afternoon

Post by jimmyshand »

DaveDewhurst wrote:
jimmyshand wrote:You need to go online in order to turn Steam offline! As soon as you go online to turn it offline
No you don't, IIRC as long as Steam has been online and logged in as you at least once on your machine previously you can go offline without going online.

Just tested it and it works how I thought.
Restart PC, Disconnect, start steam and am presented with the option of starting in offline mode, games all run fine (except any multiplayer or server oriented games obviously)

Dave
Thanks, I'll bear that in mind for future updates! Major sense of humour failure last night. Mrs Jimmy and kids were all out for the evening so I planned a marathon session. After firing up the sim the update started, then I found TrackIR wouldn't work so I spent 45 minutes fiddling with that before I tracked down through other forums that it was the update that broke it. Sent off a support email to RSC. Fired up the sim again only to find Raildriver now not working! More time spent scouring forums and raising an incident with PI Engineering before I then re-installed the RD software and got it working again.
Finally ready to take a drive only to find over 2 hours has gone by and the kids are due back at any moment so I shut down the PC and call it a night with a total mileage driven of 0.15. The joys of being a Railworker!
deltic009
Very Active Forum Member
Posts: 4017
Joined: Fri Nov 27, 2009 1:06 am

Re: Core PAtch this afternoon

Post by deltic009 »

jimmyshand wrote:
DaveDewhurst wrote:
jimmyshand wrote:You need to go online in order to turn Steam offline! As soon as you go online to turn it offline
No you don't, IIRC as long as Steam has been online and logged in as you at least once on your machine previously you can go offline without going online.

Just tested it and it works how I thought.
Restart PC, Disconnect, start steam and am presented with the option of starting in offline mode, games all run fine (except any multiplayer or server oriented games obviously)

Dave
Thanks, I'll bear that in mind for future updates! Major sense of humour failure last night. Mrs Jimmy and kids were all out for the evening so I planned a marathon session. After firing up the sim the update started, then I found TrackIR wouldn't work so I spent 45 minutes fiddling with that before I tracked down through other forums that it was the update that broke it. Sent off a support email to RSC. Fired up the sim again only to find Raildriver now not working! More time spent scouring forums and raising an incident with PI Engineering before I then re-installed the RD software and got it working again.
Finally ready to take a drive only to find over 2 hours has gone by and the kids are due back at any moment so I shut down the PC and call it a night with a total mileage driven of 0.15. The joys of being a Railworker!
If it is any form of consolation then today before work I fired up the PS3 for a spot of Gran Turismo 6 as the family had gone out. It then took an hour and a half to download an update and install andjust as iI prepared to fire it down the tarmac my wife calls to say she has omitted some important things from the baby's changing bag. By the time I got home it was enough to pick up my keys and a short and drive in, so car mileage of 0.0miles in around the goes off potential gameplay.

Still at least I can now paint the brake calipers on some of my cars and give them a fancy racing number.
Matthew Wilson, development team at Vulcan Productions

http://www.vulcanproductions.co.uk
https://www.facebook.com/VulcanFoundry/
anthonye
Well Established Forum Member
Posts: 973
Joined: Thu Jun 09, 2005 9:20 pm
Location: Barnstaple, North Devon

Re: Core PAtch this afternoon

Post by anthonye »

Looks like it messed up the smoke whilst some locos are stationary, back to the old "Balloon" effect with DT and Meshtools locos only.
Drops the frame rates down, will take their locos off until a fix from DTG (again) or the loco producers.

Anthony
User avatar
ightenhill
Very Active Forum Member
Posts: 1938
Joined: Wed Aug 27, 2008 3:48 pm
Location: Back home in London

Re: Core PAtch this afternoon

Post by ightenhill »

ightenhill wrote:Well so much for the scenario ticks patch.. Mine have all disappeared again this morning
Think I have tracked this down to me altering Players.bin to a custom resolution.. Instead of changing it on the go I put an old version back.
Image
BipolarExpress
Getting the hang of things now
Posts: 78
Joined: Mon Mar 24, 2014 7:43 pm

Re: Core PAtch this afternoon

Post by BipolarExpress »

Since this patch I seem to have a large number of files to be reacquired (4023 exactly) when I do a verify? They appear to be acquired, but if I run the program once I'm back to needing them again? Not noticed anything like this before - anyone else seem anything similar?

All the best,


Steve
User avatar
ightenhill
Very Active Forum Member
Posts: 1938
Joined: Wed Aug 27, 2008 3:48 pm
Location: Back home in London

Re: Core PAtch this afternoon

Post by ightenhill »

Think that always happens because hundred of files get changed the moment you start the game up. I wouldn't run a verify unless its a serious last resort for something broken
Image
User avatar
emrhd01
Very Active Forum Member
Posts: 4821
Joined: Thu Aug 03, 2006 1:48 pm
Location: Nottingham- East Bridgford

Re: Core PAtch this afternoon

Post by emrhd01 »

Trev123 wrote:
alanch wrote:Anyone else surprised that they have released this patch and TS2014 still doesn't have an icon file? Surely they have noticed it is missing.
Go into the Library on Steam and right click on Train Simulator 2014 and 3/4 of the way down the menu select Create Desktop Shortcut.
Thanks a lot for that information Trev, I didn't know you could do that, worked a treat. :wink:
Rob.
Proud to be a member of the VW/SSS BETA Testing Team.
BipolarExpress
Getting the hang of things now
Posts: 78
Joined: Mon Mar 24, 2014 7:43 pm

Re: Core PAtch this afternoon

Post by BipolarExpress »

Thanks for the response ightenhill, but this has definitely changed behaviour for me - previously when I've verified the small number of files reacquired matches the number of patch files I've applied (it can be more after a DLC download, which is why I usually do a verify). Now its 72MB of data that's reacquired! Maybe I'm worrying too much ;-)

All the best,

Steve
User avatar
Trev123
Very Active Forum Member
Posts: 4403
Joined: Tue Oct 19, 2010 9:13 pm
Location: Home Of The Americas Cup

Re: Core PAtch this afternoon

Post by Trev123 »

emrhd01 wrote:
Trev123 wrote:
alanch wrote:Anyone else surprised that they have released this patch and TS2014 still doesn't have an icon file? Surely they have noticed it is missing.
Go into the Library on Steam and right click on Train Simulator 2014 and 3/4 of the way down the menu select Create Desktop Shortcut.
Thanks a lot for that information Trev, I didn't know you could do that, worked a treat. :wink:
Not a problem ! :)
Intel i5-2500K 3.3GHz Quad Core, Asus P8Z 68-V LE MB, Asus GTX 1060 Strix 6GB Gaming graphics card, Windows 10 Home 64 bit, 16gb Corsair Vengeance DDR3 ram, Viewsonic VX2452mh LED 1080P HD Monitor. Seagate Barracuda 1 TB HD, Seagate Firecuda 2 TB HD,
Locked

Return to “[TS] General Discussion”