Page 3 of 4
Re: HRQ Taurus
Posted: Mon Sep 02, 2013 4:47 pm
by 749006
jstange wrote:749006 wrote:
Having slowed down to 6kph for coupling to the train I released the brakes to couple and the loco jumped to 10kph+ and hit the stock.
What was your AFB speed set to at that moment, Peter?
And your power lever?
I had reversed toward the train at about 20kph with power about 15% to move the loco then shut off and coasted.
I slowed down as I approached the train to about 6kph and when I released the brakes the loco jumps back into power and hit's the train.
The AFB was set at 100kph and was never moved during the shunt.
I'm using the Train Brake [,] not the Loco Brake.
Re: HRQ Taurus
Posted: Wed Sep 04, 2013 11:37 am
by jstange
Ok, Peter, I will try to reproduce it.
Hi all,
Yesterday I posted the following on rail-sim.de, perhaps you could also try out my new cooling sound (if interested of course):
http://rail-sim.de/forum/board38-train- ... post139542
Re: HRQ Taurus
Posted: Thu Sep 05, 2013 5:12 pm
by 749006
I noticed an update to the sounds on RailSim-De
http://rail-sim.de/railsimnew/index.php ... hrq-taurus
But not tried them yet.
Peter
Re: HRQ Taurus
Posted: Thu Sep 05, 2013 5:26 pm
by jstange
It includes my new cooling sound mentioned above, Peter. And some other updates.
Re: HRQ Taurus
Posted: Sat Sep 07, 2013 3:34 am
by sargnickfury
DaveDewhurst wrote:I emailed HRQ yesterday (Saturday) to see if there was anything specific we were forgetting to do to get Multiple units to behave correctly.
The answer I received this morning (Sunday) is to make sure all the locos are facing the same direction, Apparently its in the manual,
The same answer also appeared on rail-sim.de last night.
Have tried it, and after exiting the scenario editor and playing it again it seems to have done the trick AFB holds speed and the traction needle rotates to the right on positive and left on negative traction.
I could still swear that the Circuit breaker was on when I first entered the cab though.
I'll clear cache and try again later.
Dave
I am soooo glad you posted this, I thought I was doing something wrong!
Re: HRQ Taurus
Posted: Sat Sep 07, 2013 5:13 pm
by 749006
jstange wrote:
It includes my new cooling sound mentioned above, Peter. And some other updates.
It now seems to have disappeared
Re: HRQ Taurus
Posted: Sat Sep 07, 2013 6:39 pm
by jstange
749006 wrote:
It now seems to have disappeared
Yes, noticed that too... have no idea what happened.
Want me to send it over to you via email? (v1.1)
Re: HRQ Taurus
Posted: Sat Sep 07, 2013 7:06 pm
by Ajay1
jstange wrote:749006 wrote:
It now seems to have disappeared
Yes, noticed that too... have no idea what happened.
Want me to send it over to you via email? (v1.1)
Yes, I was looking there also for it without any luck. Perhaps you could upload it here as well ?
Antony
Re: HRQ Taurus
Posted: Thu Sep 19, 2013 9:08 am
by 749006
A few files seemed to have changed and the sound of the fans in quite loud inside the loco drowning out the sound of the horn.
I might re-download the pack and to revert the sounds the their orginal volume,
Peter
Re: HRQ Taurus
Posted: Fri Sep 20, 2013 2:36 pm
by 749006
Another new livery
http://www.railcolor.net/index.php?nav= ... tion=dview
CD Livery for the Railjet services
Re: HRQ Taurus
Posted: Fri Sep 20, 2013 3:57 pm
by jstange
My home town and I knew nothing about this! Thanks, Peter!!!
If someone could create this repaint for the hrq taurus, would be fantastic!
Re: HRQ Taurus
Posted: Fri Sep 20, 2013 4:04 pm
by smarty2
Would Be nice to see a Czech route to go with it, and a Polish one too.
Re: HRQ Taurus
Posted: Sat Sep 28, 2013 3:31 am
by sargnickfury
Anyone else having problems after upgrade to ts2014. When using AFB I will stop loco and find my dynamic breaks won't disengage. Only way to start again is too manually do so, but then the dynamic breaks won't work with AFB when I restart. Only started after TS2014, unless somehow I just didn't trigger it before.
Re: HRQ Taurus
Posted: Sun Sep 29, 2013 7:30 am
by sargnickfury
No one else having this issue?
Re: HRQ Taurus
Posted: Sun Sep 29, 2013 7:54 am
by smarty2
sargnickfury wrote:No one else having this issue?
I'll take a butchers, but in the meantime I suggest you e-mail the author.