Baureihe 423

[matt1314]

That unfortunately didn't help but I found the problem which was causing the one pantograph bogey not to rotate.

Here's how to fix it:

1. Find the file 433_bogey 01.bin in the Assets\RSC\BR423Pack01\Elloks\BR433 folder.

2. Open it in RW Tools and find the string "<Geometry d:type="cDeltaString"></Geometry>".

3. Change it to "<Geometry d:type="cDeltaString">bo01</Geometry>" (You see that I added "bo01".).

4. Next, find the first "<NodeId d:type="cDeltaString"></NodeId>" string.

5. Change it to "<NodeId d:type="cDeltaString">bo01wh02</NodeId>" (You see that I added "bo01wh02".).

6. Finally, find the second "<NodeId d:type="cDeltaString"></NodeId>" string.

7. Change this one to "<NodeId d:type="cDeltaString">bo01wh01</NodeId>" (You see that I added "bo01wh01".).

8. Go in-game and find a good spot to see wheels. They will rotate, I tested that myself. Best would be the second station in the second scenario of this addon (S3 to Mammendorf).

9. Enjoy!

[iceman2117]

hi, ...

Error (FAT)
It happens only when the wagon 433b (Panto) is rotated in a certain direction.
Then, the click on the carousel ride and either Scenario Shutdown or even program exit. (SBHH)
Either clutch bogey or defective. Where the bogey is not well known, with turns at 433b wagon.

It can not be that you have to worry about whether you have the car turned right ..

This must necessarily repair the RSC support.

g'ice

two Pics
from my Freware Route (Free Ride)

Bad (Derail/SBHH)

Good

[DaveDewhurst]

Not sure why you would put them that way round?

As the 423 uses jacobs bogies they will only go together one way.

Wrong


Right


Dave

[trainsmit]

It would have been nice, if the unpowered bogie had been on the car without a pantograph - or the pantograph had been on the car without boies, if you prefer.
This would permit users to invent their own consists i.e. make longer trainsets like 5, 6, 7 or 8 car. Even a short with only 3. That would be great.

I found out how to tap some 6000 horsepowers off of the undriven bogie of the pantograph car (in Sim433a.bin) - which was causing the trainset to have 3 times the usual power - amazing, that it could "take off" without wheel-slip.

I would like to adjust the sensitivity of the trottle/brake handle. Anybody know what to fiddle in in which file(s)?

A great trainset for the german routes - even for the Northern Europe (if we can convince DSB to buy '423s for S-train and paint the doors white )

Some DB E10/E40 and BR 01 and some DSG cars (sleeper and restaurant) would be nice too.

[iceman2117]

hi, ...

@Dave

Yes I probably installed the wrong direction bogies. Too bad it every time the program crashes. Thank you for your explanation.
However, there still lacks the speedometer illumination. The CAB light you can not use it for there. Here RSC is still in with a mandatory update.

g'ice

@ Trainsmiter
sensitive Throttle..here
http://www.rail-sim.de/railsimnew/index ... ad/64/1605

Here are two pictures of the train in the previous color "salmon - orange" of the German Federal Railroad.
Have you donated a LED light. In the real drive and some with LED lights.
On that occasion I also have little dirty the roof ...

[iceman2117]

hi, ...

g'ice

Expandet Look on skinning roof

[iceman2117]

hi, ...

near Finntrop ...

g'ice

[cvo2010]

Great shot's and repaint's ice .

Regards Claus

[749006]

It would have been nice, if the unpowered bogie had been on the car without a pantograph - or the pantograph had been on the car without boies, if you prefer.
This would permit users to invent their own consists i.e. make longer trainsets like 5, 6, 7 or 8 car. Even a short with only 3. That would be great.

I found out how to tap some 6000 horsepowers off of the undriven bogie of the pantograph car (in Sim433a.bin) - which was causing the trainset to have 3 times the usual power - amazing, that it could "take off" without wheel-slip.

I would like to adjust the sensitivity of the trottle/brake handle. Anybody know what to fiddle in in which file(s)?

A great trainset for the german routes - even for the Northern Europe (if we can convince DSB to buy '423s for S-train and paint the doors white )

Some DB E10/E40 and BR 01 and some DSG cars (sleeper and restaurant) would be nice too.

I suppose that as the REAL train cannot be formed in to 3/5/6/7/8 car train, of one set - before I'm corrrected, that they mode the model that way

Peter

[holzroller]

There is an update on railsim.de that fixes the throttle amongst other things.

[johnmckenzie]

Can anyone tell me - did the non-rotating wheels ever get fixed by RSC? If not, that's a deal-breaker for me.

[holzroller]

There is now an NWB reskin available here http://rail-sim.de/railsimnew/index.php ... ad/64/1644

[749006]

What is the unit like?

And is it worth getting?

Thanks

Peter

[smarty2]

What is the unit like?

And is it worth getting?

Thanks

Peter

Yes, and with the ttb soundset it is even better.

[chrisreb]

Well having got the German Class 440 recently this looks very similar so will wait for a bigger discount down the line somewhere.