Important information about SteamPipe
Moderator: Moderators
Re: Important information about SteamPipe
Righty at 13:11 I received 3 new files:
appmanifest_24010.acf
sourceinit.gcf
winui.gcf
I have fired up TS but did not get any message about it being updated
appmanifest_24010.acf
sourceinit.gcf
winui.gcf
I have fired up TS but did not get any message about it being updated
Re: Important information about SteamPipe
I too have these files, but every time I try to clear the cache in game, I get the following message, 'Failed to start game' (Application already running)?
I did a verify and it downloaded 98.7KB. The game seems to run fine but I cannot/won't let me clear out the cache, is this right? I have logged in and out of Steam, re started pc, rried off line then back on line and still the same?
I did a verify and it downloaded 98.7KB. The game seems to run fine but I cannot/won't let me clear out the cache, is this right? I have logged in and out of Steam, re started pc, rried off line then back on line and still the same?
- alanch
- Very Active Forum Member
- Posts: 4907
- Joined: Mon Feb 27, 2006 6:07 pm
- Location: Leeds, England
- Contact:
Re: Important information about SteamPipe
I am sure that you will find that the blueprint cache has been cleared - check to see if there are any Blueprints.pak files left in your Assets folder. What is happening is that Railworks.exe is still running when the script attempts to start it running again - and that isn't allowed, only one copy can run. Just leave it a short time, and start TS2013 again by right-clicking on the Steam taskbar icon.brummie wrote:I too have these files, but every time I try to clear the cache in game, I get the following message, 'Failed to start game' (Application already running)?
I did a verify and it downloaded 98.7KB. The game seems to run fine but I cannot/won't let me clear out the cache, is this right? I have logged in and out of Steam, re started pc, rried off line then back on line and still the same?
If you want to to see if any program is running, start the Windows Task Manager (Ctrl-Alt-DEL and click on Task Manager is the quickest way) and look for the filename on the processes tab - for TS2013 look for Railworks.exe.
If you want to create your own batch file to clear the blueprint cache, just copy the following lines, and paste them into a file in a text editor - Notepad will do:
del /s Blueprints.pak
pause
Save the file in the Railworks/Assets folder as a batch file with a sensible name - ClearCache.bat should do. Then create a shortcut to this file on your desktop. When you double-click the desktop icon, a command prompt window will open, and this will list the files as they are deleted. When it finishes, press the space bar, and the window will close. Job done.
Alan
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
Re: Important information about SteamPipe
Thanks for the info Alan, that must be so as the game runs ok apart from the clear cache. All the best.
- Traveller54
- Very Active Forum Member
- Posts: 2877
- Joined: Mon May 15, 2006 11:13 am
- Location: Once of Derby, now in Warrington, UK
- Contact:
Re: Important information about SteamPipe
You don't!!!!TheTazman wrote:Righty at 13:11 I received 3 new files:
appmanifest_24010.acf
sourceinit.gcf
winui.gcf
I have fired up TS but did not get any message about it being updated
The only indication is the change in the file mentioned several times in this thread and watching Steams progress bar go across and the little message box pop-up in the bottom right hand corner of your monitor screen saying it is done. Nothing else, the version number of TS2013 stays the same (v27.5a for info.) but I still can't work out why RSC said it would take such a time for such a small file update. Ho Hum!!
[Intel i5-8600K+3.60GHz/16Gb DDR4/NVidia GeForce GTX 550ti 4Mb/1 x SATA3 120Gb SSD, 3xSATA3 2Tb/Win10 Ultimate 64bit]
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
-
winifred89
- Well Established Forum Member
- Posts: 685
- Joined: Sun Feb 27, 2011 2:21 pm
Re: Important information about SteamPipe
Sorry for being think after a verify integrity cache , i know i have to re-install Ap sounds , but do i have to re-install the extra stocks pack reskins?
- Traveller54
- Very Active Forum Member
- Posts: 2877
- Joined: Mon May 15, 2006 11:13 am
- Location: Once of Derby, now in Warrington, UK
- Contact:
Re: Important information about SteamPipe
Should there be two files begining "appmanifest" in the Steamapps folder 'cos I haven't and the Sim works for me?!ashgray wrote:Hi JamesRetro wrote:Hi Ash,
appmanifest_5578.acf File
appmanifest_24010.acf File
Kind regards James.
It looks like the process has already taken place, as the files I've highlighted are the ones that Steam replaces on your system for the old ones named *.ncf, which are no longer there by the looks of it.
If there's anything else Steam needs to do, I'd let it take it's course in good time.![]()
Ash
[Intel i5-8600K+3.60GHz/16Gb DDR4/NVidia GeForce GTX 550ti 4Mb/1 x SATA3 120Gb SSD, 3xSATA3 2Tb/Win10 Ultimate 64bit]
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
- alanch
- Very Active Forum Member
- Posts: 4907
- Joined: Mon Feb 27, 2006 6:07 pm
- Location: Leeds, England
- Contact:
Re: Important information about SteamPipe
One file for each Steam game that has converted to Steampipe, I assume - if you only have one game, you will only have one file (24010).Traveller54 wrote:Should there be two files begining "appmanifest" in the Steamapps folder 'cos I haven't and the Sim works for me?!
Alan
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
- ashgray
- Wafflus Maximus
- Posts: 12235
- Joined: Sun Jan 09, 2005 3:25 pm
- Location: GWR, Nailsea, Somerset
Re: Important information about SteamPipe
The stock packs don't over-write any default files so there should be no need.winifred89 wrote:Sorry for being think after a verify integrity cache , i know i have to re-install Ap sounds , but do i have to re-install the extra stocks pack reskins?
Ash
Ashley Gray
Intel Core i7-7700K @ 4.2Ghz Quad Core, Gigabyte Gaming Motherboard, 2 x 512Gb SSDs + 1TB SATA drives,
16 Gb DDR-4 Corsair RAM, Nvidia GeForce GTX1060 6Gb RAM, ASUS Xonar D2X/XDT Soundcard, Windows 10 64 bit
Intel Core i7-7700K @ 4.2Ghz Quad Core, Gigabyte Gaming Motherboard, 2 x 512Gb SSDs + 1TB SATA drives,
16 Gb DDR-4 Corsair RAM, Nvidia GeForce GTX1060 6Gb RAM, ASUS Xonar D2X/XDT Soundcard, Windows 10 64 bit
-
winifred89
- Well Established Forum Member
- Posts: 685
- Joined: Sun Feb 27, 2011 2:21 pm
Re: Important information about SteamPipe
Thanks for that , cheersashgray wrote:The stock packs don't over-write any default files so there should be no need.winifred89 wrote:Sorry for being think after a verify integrity cache , i know i have to re-install Ap sounds , but do i have to re-install the extra stocks pack reskins?
Ash
- Ajay1
- Very Active Forum Member
- Posts: 1685
- Joined: Sun Nov 02, 2008 4:37 pm
- Location: Wellington,New Zealand
Re: Important information about SteamPipe
This steampipe business is driving me nuts, I think I might need to go for a steamclean . I have these three new files so I think I'll just leaveit at that now and wait and see. updated or not ?
Antony
Antony
Windows 10 Home 64-bit,Intel Core i7-2600 CPU @ 340GHz,
12.00GB RAM, NVDIA GeForce GTX 660Ti
12.00GB RAM, NVDIA GeForce GTX 660Ti
- Traveller54
- Very Active Forum Member
- Posts: 2877
- Joined: Mon May 15, 2006 11:13 am
- Location: Once of Derby, now in Warrington, UK
- Contact:
Re: Important information about SteamPipe
Thanks Alan - as I only have RS then that is the reason. just wondered if that was the cause of the problems but obviously notalanch wrote:One file for each Steam game that has converted to Steampipe, I assume - if you only have one game, you will only have one file (24010).Traveller54 wrote:Should there be two files begining "appmanifest" in the Steamapps folder 'cos I haven't and the Sim works for me?!

[Intel i5-8600K+3.60GHz/16Gb DDR4/NVidia GeForce GTX 550ti 4Mb/1 x SATA3 120Gb SSD, 3xSATA3 2Tb/Win10 Ultimate 64bit]
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
Trav .....
http://www.oakwood-shed.co.uk/sww5/sww_route5.html
Re: Important information about SteamPipe
Well, after starting and restarting Steam and TS2013 more than several times, I still have no appmanifest_24010.acf (although I have many others from other Steam games) and no updated files or folders. Not sure why. I'm not going to verify cache though just to get this update.
- Retro
- Very Active Forum Member
- Posts: 4926
- Joined: Tue Oct 19, 2004 9:52 pm
- Location: Bury. Home of the E.L.R.
Re: Important information about SteamPipe
Just received this from RSC.
Dear James
Thank you for contacting the Railsimulator.com customer support, your inquiry has been logged with a member of our dedicated customer support team.
We are aware of an instance whereby the Steam client does not notify you about the change over. This appears to happen when the user already has a game or games that use the system.
The unable to launch error is due to the Steam Client trying to launch the game before it has actually completely closed from the previous session. At this time simply click play in the steam client to re-open the game.
I only have one game on Steam
As they are aware of the problem then why has the problem only occurred for a small number of people and are they going to fix it
Kind regards James.
Dear James
Thank you for contacting the Railsimulator.com customer support, your inquiry has been logged with a member of our dedicated customer support team.
We are aware of an instance whereby the Steam client does not notify you about the change over. This appears to happen when the user already has a game or games that use the system.
The unable to launch error is due to the Steam Client trying to launch the game before it has actually completely closed from the previous session. At this time simply click play in the steam client to re-open the game.
I only have one game on Steam
Kind regards James.
Last edited by Retro on Wed Jan 30, 2013 6:35 pm, edited 1 time in total.
One Ring to rule them all, One Ring to find them,
One Ring to bring them all and in the darkness bind them
One Ring to bring them all and in the darkness bind them
- DaveDewhurst
- Very Active Forum Member
- Posts: 1994
- Joined: Wed Nov 28, 2007 10:21 am
- Location: Birkenhead
- Contact:
Re: Important information about SteamPipe
I know its not a game, but that list you posted of what .acf files you have showsRetro wrote:I only have one game on Steam![]()
appmanifest_5578.acf
A video for Silent Hunter 5
So maybe that also counts.
Dave