New West Somerset v3

[TransportSteve]

Gary, you're a star, thank you.

Cheerz. Steve.

[Ajay1]

Hi Antony

I've just ran the full line from Bishops Lydeard to Minehead without a problem - are you sure you've set your points correctly at Dunster in the free roam?

Ash

That may have been the case. I'll try again and see what happens, and thanks Transportsteve for the info on where to find the missing building bin files.I have already found it from my backed up assets folder from RW3. Still looking for the three remaining UK Colour light files though.

Just ran through this scenario again and this time checked the points,no problem , by the way installed the Colour lights facelift, Thanks.

Antony

[chazcozens]

Anybody else had trouble with no signals showing on this route. Done a check with RW tools and it says the signal assets are on RSC Falmouth line but that requirement isnt mentioned in the readme. Cant contact the uploader has the weblink dosnt work??

Hi yes,

I've had this (even though I have the Falmouth Branch installed it has no signals folder; according to RWT the signals for the Falmouth Branch are all Kuju assets - I can only assume that an earlier version of Falmouth included those files) and I eventually solved it as follows:

First, create a folder under \railworks\Assets\RSC\FalmouthBranch\RailNetwork called Signals

Next, within that folder create another folder called UK Semaphore

Then copy the \railworks\Assets\Kuju\RailSimulator\RailNetwork\signals\UK Semaphore\Lattice_Posts folder to the UK Semaphore folder you just created

Next rename it to Posts

Open the folder and rename B Lattice JuncSig L1_hh.bin to JuncSig L1_hh.bin Repeat this for the JuncSig L2_hh, Sig_D, Sig_h 1T and Sig_h 2T files.

Now copy the \railworks\Assets\Kuju\RailSimulator\RailNetwork\signals\UK Semaphore\Sem_Shunt folder to the \railworks\Assets\RSC\FalmouthBranch\RailNetwork\UK Semaphore folder

At the end you should have a \railworks\Assets\RSC\FalmouthBranch\RailNetwork\UK Semaphore folder. This should contain a Posts and a Sem_Shunt folder. You should have renamed 5 files in the Posts folder.

Finally, delete all the blueprints.pak files from your RW installation.

This worked for me.

[pectin]

Thank You for detailing this! My Appologies to anyone who has to go through with this process and not making the transistion from version 2.5 to 3 as simple as possible. Maybe RSC will get round to addressing this problem. I wish everyone many hours of WSR Driving.

David Seward

[gptech]

Anybody else had trouble with no signals showing on this route. Done a check with RW tools and it says the signal assets are on RSC Falmouth line but that requirement isnt mentioned in the readme. Cant contact the uploader has the weblink dosnt work??

Hi yes,

I've had this (even though I have the Falmouth Branch installed it has no signals folder; according to RWT the signals for the Falmouth Branch are all Kuju assets - I can only assume that an earlier version of Falmouth included those files) and I eventually solved it as follows:

First, create a folder under \railworks\Assets\RSC\FalmouthBranch\RailNetwork called Signals
......

Or, use RW Tools to edit the route assets to point to those in the Kuju folder.

EDIT: Forget my idea----sgnals will be classed as track items, and can't be replaced with RW Tools.

[gptech]

The only slight problem with copying the Kuju assets over is that you'll have ladders in mid-air when the signals are used on a gantry.

[chazcozens]

[quote="gptech

Or, use RW Tools to edit the route assets to point to those in the Kuju folder.

EDIT: Forget my idea----sgnals will be classed as track items, and can't be replaced with RW Tools.[/quote]


I'd already found that out the hard way! Hence the detailed explanation. Can't say I've noticed the mid-air ladders but I can live with it anyway, at least I've got some signalling!

So far looks like a very good and fairly faithful reproduction of the prototype!

[gptech]

I've had this (even though I have the Falmouth Branch installed it has no signals folder

Didn't the Falmouth Branch receive an update to add 'proper' lower quadrant GWR signalling?-----http://forums.uktrainsim.com/viewtopic. ... e#p1587976

You may need to be investigating why you only have the default Kuju signalling.

[antonyperks]

I thought the original WSR had John Yelland's GWR kit?, i must admit i downloaded this updated line and had so many items missing that i deleted it almost straight away.

[peb52]

I've finally got this working, but I've noticed some objects/people are not at the correct height, e.g. the fork lift driver at Minehead appears about a foot above the seat and the people at Dunster station have there feet in the platform. Which files contain the information, I'm assuming there are x, y, z co-ordinates that can be changed.