Atomic Systems

Yes there are 3 separate consists at Carmarthen. The instructions I had were to drop off passengers,which I did at the end of the platform and still got the red wait bar.
Then it says couple to the 153 in front which caused the SBHH when I tried it.
Oh well plenty more scenarios to try.
I seem to have mucked things up as I cloned one scenario to use a 142 instead of a 150 and now various 158s won't load.
I even reinstalled the route .rwp but still the problem persists. Strange route.

gptech wrote:Only the 153 should go with you, the stock already stood at the platform should be 3 separate consists.

Oh well - all seemed to be connected. Still got right to the approach to Swansea platform - had a SBHH but re started from a recent save point and completed the run.

Not sure if just connecting to the 153 only would get me close enough to be allowed to load passengers. Sure I did not push very hard when commenting at 1.8mph so surprised if I connected to them all. Still managed to carry along 2 2 car 150, a 153, two 2 car 158's and another 2 car 150.

Very interesting scenario all in all.

Clemmo47 wrote:Yes there are 3 separate consists at Carmarthen. The instructions I had were to drop off passengers,which I did at the end of the platform and still got the red wait bar.
Then it says couple to the 153 in front which caused the SBHH when I tried it.
Oh well plenty more scenarios to try.
I seem to have mucked things up as I cloned one scenario to use a 142 instead of a 150 and now various 158s won't load.
I even reinstalled the route .rwp but still the problem persists. Strange route.

When re installing that scenario I had various 158's that would not laod so changed them all for Teal Liveried ones.

It's the Teal New and Silver that now refuse to load. They all worked before. I'll try a few things. Not a route to play about with too much it seems.

I used the older Teal ones I think and they were fine.

Class 66s and 158s will not load now. I deleted the route folder,the.rwp and the pacerpilot folder. Then reinstalled the .rwp route but still the same.
Looks like a reinstall of the whole assets folder. At least my main assets folder still works ok. I'll try that later.

When you all install the route ,do you alsp find all the missing track and a couple other items (as shown by RW-Tools). I've been installing all the missing stuff from previous backups but is that necessary ?

Clemmo47 wrote:Class 66s and 158s will not load now. I deleted the route folder,the.rwp and the pacerpilot folder. Then reinstalled the .rwp route but still the same.
Looks like a reinstall of the whole assets folder. At least my main assets folder still works ok. I'll try that later.

When you all install the route ,do you alsp find all the missing track and a couple other items (as shown by RW-Tools). I've been installing all the missing stuff from previous backups but is that necessary ?

May I suggest you have a read from the website about 'Installation'? Then run RW_Tools on the dedicated folder to see what needs copying from the original Assets (now renamed) folder.

I didn't have UKTS 22049 installed. Perhaps that contains all the tracks I was installing manually.I didn't have any missing assets but something might have been wrong. I must remember to add that when I reinstall SWW. Easy to miss the Release Notes.

Clemmo47 wrote:It's the Teal New and Silver that now refuse to load. They all worked before. I'll try a few things. Not a route to play about with too much it seems.

Stock should be independant from routes, so if you have bother loading these items in SWW it may not be a route issue. Do they load in any other route?

Clemmo47 wrote:Easy to miss the Release Notes.

Are we talking about the web site here?

Yes I missed the track changers on the web site release notes. My fault but I added them now. Don't know if that makes a difference.
RW-Tools shows missing track items. Is it necessary to add them from a previous backup ?

I made a new Assets/contents folder and the 158s etc seem to work ok now. I started having problems in the previous installation when I cloned a scenario to use the AP 142.

I can get scenario 1 as far as Swansea but then get a SBHH as I enter platform 1

I Deleted the River to get that far

hi all got ts2013 but when i try to run sw wales route getting sbh error. any ideas?

nigeldarl5 wrote:hi all got ts2013 but when i try to run sw wales route getting sbh error. any ideas?

Very hard to get it to run with other routes. Many have got it to run in its own Asset and Content folders. You also need to delete the scenario item mentioned earlier in the thread.

nigeldarl5 wrote:hi all got ts2013 but when i try to run sw wales route getting sbh error. any ideas?

I'll stand corrected.. but I don't think this route is optimised for TS2013