Ferrovia sul confine Italia-Francia V3.0 -- released

[johncoltrane]

Hi guys. First of all, sorry, I didnt answer to many questions here and problems. But summer has arrived a while ago So, wasn't in mood for RW. But lately, I have started to build the french part of the route:

I hope with the patch from anemonelab the issue about not being able to couple to the coaches is solved. In short time I will release the next scenario: It's a little pack, containing 2 scenarios.

In future, I will post pictures of new scenarios on this page:


http://steamcommunity.com/id/johncoltra ... reenshots/

I have shut down my ferroviaitaliafrancia page because of lack of time.

Ciao, Pasquale.

[chrisreb]

Very nice set of pictures Pasquale!

[johncoltrane]

Thanx Chris. Have you seen the other ones on my steamaccount? I am exited about the french part of the route. Only the french signal system gives me some headaches

Ciao...

[Clemmo47]

Grazie. Non vedo l'ora di questa nuova tratta e gli scenari.

[chrisreb]

Thanx Chris. Have you seen the other ones on my steamaccount? I am exited about the french part of the route. Only the french signal system gives me some headaches

Ciao...

Yes had a good luck - look forward to trying it out!!

[johncoltrane]

Hi everyone. I have just uploaded a scenario (actually it's a little pack, 2 scenarios are included) for the route (also available on rail-sim.de). I have still some other scenarios on my hd, some are almost ready, other have to be redone and tested again. There's also a little scenario pack (about 7 scenarios are included) which I have to go over again and change some little things. But hey, it's summer time and I am not really productive at the moment.

Could be that I won't upload until the release of TS2014 anything. But who knows, maybe there's still space for another or two scenarios. Sometime in autumn I plan to release version 4.0 of the route....

Stay tuned and ciao...

Pasquale.

[Ajay1]

I went to use this route for the first time after a long absence from it, and installed the D445 files to fix the scenario that would not work. Thanks for that Pasquale. Now for some reason no scenarios work,every time a scenario loads I get SBHH . I have a dedicated Kuju folder just for this route which is only 4.5 gig (it was working the last time I played this route) Have tried : copying over my backup folder,replacing the original D445 files and still won't work. Now before I do something drastic like throwing the computer out the window or re-installing TS2013,is there anything else I can try? I also un-installed/re-installed the route and started to install the scenarios one by one checking as I went with the same results.

Cheers Antony

[chrisreb]

Try a separate Route folder also as a test as that sometimes works. For me it works with the Kuju folder for my Southern Euro routes and a Routes folder with all my Euro routes.

Strange it should suddenly stop wokring. Normally this is only because the Kuju or some other folder has broken the invisible barrier of bin file numbers. Try removing all the US stock from the Kuju folder.

Otherwise create a new Assets folder and start again renaming the present one temporarily.

[Ajay1]

Separate route folder sounds interesting,but I'm not sure what you mean Chris ? Could you please explain. Also forgot to mention that the only other route that depends on this dedicated folder namely "Torino Genova" is unaffected and works fine. Also I thought about the removal of the US stock from the folder a wee while back but decided against it,thinking that it may break it. Does it work?

I suppose the other thing I can do ,but I'm a bit reluctant too is start from scratch and do a complete fresh install of TS2013.
Antony

[chrisreb]

Within the Contents folder there is a folder called routes. Just rename it to Routesxx or something. Create an empty routes folder and move the Problem route there and try again as this has worked for some routes for me.

If you want to create a fresh assets folder


In case you are interested here is what I do

1. Rename Asset folder temporarily to something like AssetsMain
2. Verify cache via steam - go away and make a cup of tea
3. Steam will creat a new base asset folder
4. Install required assets for the route
5. Use new folder for this route (and others not working)
6. When you want to revert to main folder rename new one e.g Assets BE and AssetsMain back to Assets

Works for me - will the many routes I have issues with I have 7 or 8 Asset folders now and a big hard disk

As a more limited Test

I have recently found that in a number of cases the above can be applied to just the KUJU folder alone. This seems to work on a number of UK routes especially proving the Kuju folder is the most common culprit.


If you have a Euro only Kuju folder and a route has even a single scenery item from the US sub folder ALL the US assets are loaded. As you don't need us rolling stock it is safe to delete or a least temporarily moving them. You could then try other Kuju US sub folders as well if required.

If anything is missing says RW Tools then just move that particular asset back.

Let me know how it goes.

[Ajay1]

Thanks, Will give it ago. Fingers crossed.

[Ajay1]

Let me know how it goes.

Did the wrong thing, rather than do a game verification at night I did one on Sunday morning. Took seven hours which meant I was unable to play or tinker with it all day. Never mind, Have now created a fresh new Assets folder which is now backed up.With the impending release of TS2014 not to far away I have decided against trying to fix this for the moment as no doubt there will be other routes and scenarios that will not work as well and will have to go through it all again.

Antony

[da7013]

I thought I had downloaded everything for this route but RW tools shows these assets missing.

c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\01\avviso\fs_seg01vq_avviso.bin
c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\02\1cat\fs_seg02vq_1cat_1l.bin
c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\02\1cat\fs_seg02vt_1cat_4l.bin

Does anyone know where I can find them.

Thanks

David

[chrisreb]

I thought I had downloaded everything for this route but RW tools shows these assets missing.

c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\01\avviso\fs_seg01vq_avviso.bin
c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\02\1cat\fs_seg02vq_1cat_1l.bin
c:\program files (x86)\steam\steamapps\common\railworks\Assets\RSItalia\Addon\railnetwork\signals\fs\02\1cat\fs_seg02vt_1cat_4l.bin

Does anyone know where I can find them.

Thanks

David

Sorry can't remember but if you have no luck I can always put the folder on dropbox.

[alpend]

Hi David

Those signals are part of the included assets for the Brescia-Iseo v1.0 Route available from http://www.amicitreni.org.
(Link is: http://www.amicitreni.org/download/comm ... 53f7f43adf)
Unfortunately you need to download all 8 parts of the .RAR file to get them (some 540 MB). Once you have the .RAR
file open it in winrar or 7zip and navigate to Brescia-Iseo_1_0\Assets\, the actual file you want is called
Segnali.rwp. On the plus side the route itself is very good.
Hope that helps

Al