List of RSC DLC bugs

[USRailFan]

I was using Auto Fireman, always do.
Since the criteria for which bugs are eligible for submitting here is something that in practice is almost impossible to fulfill (ANY bug can be due to someone's driving, set-up, etc), I guess this thread should be closed.

[nobkins]

Please please make sure you check your bug AND verify it. This is not a wish list (or should not be).

If possible get someone else to verify the bug so that we can be 100% certain it is a bug and not a fault specific to one users setup. If we report a list of bugs where some are not actual bugs (even if it is a small number of the total) then it wastes RSC's time looking into non-bugs and they may well decide that working through the list is not a productive use of their time.

Lets make sure we get it right

Now for my bug (I have spoken to others and they report the same but if someone else could verify on a 100% default class 47 loco that would be great).

The class 47 train brake can not be controlled with the mouse (it is impossible to click and move the handle) and the loco brake is very hard (but not impossible) to move.

[phil17]

Sound phasing issues with multiple locos and units. Also lack of fluid gameplay, be it tile loading or micro stutters....

[Kariban]

Well, if you want to do it properly, do a bug report, like this:
------

Synopsis: Can't fuel manually fired steam locomotives when in multiple
Description:
When in multiple, manually fired steam locomotives:

• Can not be fuelled using keyboard or F4 hud - the F4 hud will indicate no water or coal is being fed despite what the F5 display shows. Using the 3d cab controls will enable you to fuel the engine *while stationary*.
• The engines not under direct player control in the consist will not fuel themselves.

Reproduction:

• Enable manual firing
• Build a consist with two or more steam locomotives. Location and locomotives do not matter
• Drive and attempt to fire/feed water into the locomotive. After some time of driving, the scenario will end with "Locomotive out of water".

[dean1986]

47/7s were cleared for 100mph

http://www.class47.co.uk/c47_numbers.php?index=4

[thecheesemeister]

This is not a wish list.

Now for my bug (I have spoken to others and they report the same but if someone else could verify on a 100% default class 47 loco that would be great).

The class 47 train brake can not be controlled with the mouse (it is impossible to click and move the handle) and the loco brake is very hard (but not impossible) to move.

I'd like to echo the sentiments in the first sentence and can confirm that I am unable to operate the class 47 train brake with the mouse.

[firetrap1]

Please please make sure you check your bug AND verify it. This is not a wish list (or should not be).

If possible get someone else to verify the bug so that we can be 100% certain it is a bug and not a fault specific to one users setup. If we report a list of bugs where some are not actual bugs (even if it is a small number of the total) then it wastes RSC's time looking into non-bugs and they may well decide that working through the list is not a productive use of their time.

Lets make sure we get it right

Now for my bug (I have spoken to others and they report the same but if someone else could verify on a 100% default class 47 loco that would be great).

The class 47 train brake can not be controlled with the mouse (it is impossible to click and move the handle) and the loco brake is very hard (but not impossible) to move.

Yes I can report that the default 47 train brake cannot be moved by the mouse. The class 47 loco brake can only be manipulated by the mouse if you click on the part of the brake handle that connects the black rubber end to the pivot. The loco brake is also only mapped to be manipulated by the mouse on the inward facing side of the control (which is tiny).

chris

[FoggyMorning]

47/7s were cleared for 100mph

http://en.m.wikipedia.org/wiki/British_ ... #section_3

Hi - that isn't the issue here in my view; the model included in the NSE class 47 DLC has a big label in the cab saying "Max Speed 95 MPH".

So the model may be (in fact, is) inaccurate in this respect, but it is not a bug in the software

Steve

[dean1986]

Not a bug but would love the option to turn off next signal like in career mode

[nobkins]

Excellent post Kariban.

Sheep you are the thread starter. This could become quite a lot of work. Are you willing to collate all the records? It would require a very methodical approach to ensure the list is good .

Might I suggest that those that have reported bugs re-post theirs in the format suggested by Kariban. It is ideal for whoever is collating the info (sheep??) as they can just copy and paste it into a document once more than one member has confirmed the fault.

Here is mine in the format Kariban proposes:

Synopsis: Class 47 train brake can not be controlled using the mouse
Description:
When in the cab of a class 47 it is impossible to move the train brake lever (and thus use the train brake) with the mouse.

Reproduction:
With any class 47 locomotive simply enter the cab and try to move the train brake lever with the mouse

#########################################################

Synopsis: Class 47 loco brake very hard to control using the mouse
Description:
When in the cab of a class 47 it is very hard to select the loco brake lever and move it.

Reproduction:
With any class 47 locomotive simply enter the cab and try to move the loco brake lever with the mouse

[ashgray]

Not a bug but would love the option to turn off next signal like in career mode

In which case it's simply a wish, and is therefore off-topic.

Please - let's keep this thread for what it was originally intended for.

Ash

[DaveDewhurst]

Done, and I remembered another one

Synopsis:Class 325 Mail Express pantograph animation broken
Description: When raising the pantograph on the Class 325, the armature comes away from the base
Reproduction:

• Raise the Pantograph on a Class 325

Synopsis:Class 423 4VEP Spelling mistake in cab
Description: The "Engine" stop button is incorrectly labelled "Enging" Stop
Reproduction:

• Go into cab view and read the label above the Engine stop button

Synopsis:Class 158 (Settle & Carlisle Version) has no DRA button (The DRA used to be there even if inoperable)
Description: The DRA button has been left out of the distributed model
Reproduction:

• Go into cab view and look at the DRA box, you can see the shadow of where a button once was

Synopsis:Class 158 (Settle & Carlisle Version) Passenger view windows have incorrect rain effects
Description: The windows of the passenger view are using a wrong texture
Reproduction:

• Go into passenger view of a 158 (S&C version) whilst raining
• The rain falls in different directions on different windows and there are sections where no rain falls at all

Synopsis:Class 158 (Settle & Carlisle Version) Door interlock lights do not work
Description: When the doors open on the 158 (S&C) version, the orange interlock lights on the outside of each carriage do not illuminate.
Reproduction:

• In external view open the doors of an S&C version 158 whilst watching the orange lights at the centre of each carriage

Synopsis:Class 377 (All White Livery), one carriages doors disappear before the train when moving view away.
Description: The doors have their LOD set incorrectly when compared with the rest of the train
Reproduction:

• Play any scenario or free roam with a 377 (all white livery) and slowly move camera away
• One set of doors will disappear

Synopsis:Class 377 The interlock does not operate correctly
Description: When stopped at a station and your doors are open, if you have positioned your train in such a way that the front (driving carriage) doors did not open you will be able to drive away with the doors open
Reproduction:

• Play any scenario or free roam with a 377 and stop at a station so "all" the doors open, the interlock will engage and your train will not move when under power
• Repeat the above but with the front (driving) carriage doors closed. You will be able to move off with the doors open

Dave

[jimmyshand]

Couple of oldies that have been present for a long time but still exist on my setup; 1. Screaming engine/gears on class 101, never been officially fixed. Community mods break Raildriver compatibility so no good. 2. Class 101 performance, accelerates like a Ferrari not a 1950's bus on tracks. Again needs officially sorting to avoid faffing with reapplying community mods every time there is a core update or you need to verify cache. 3. Sound bug with rear HST power car. Nearly always sounds at idle on my rig. 4. Drivers on roof, still occassionally find this on the default HST from time to time. Needs a verify cache to fix it which then duffs up all your other mods and enhancements.

[firetrap1]

Couple of oldies that have been present for a long time but still exist on my setup; 1. Screaming engine/gears on class 101, never been officially fixed. Community mods break Raildriver compatibility so no good. 2. Class 101 performance, accelerates like a Ferrari not a 1950's bus on tracks. Again needs officially sorting to avoid faffing with reapplying community mods every time there is a core update or you need to verify cache. 3. Sound bug with rear HST power car. Nearly always sounds at idle on my rig. 4. Drivers on roof, still occassionally find this on the default HST from time to time. Needs a verify cache to fix it which then duffs up all your other mods and enhancements.

All my default HST have their drivers in the cab. It's looks like the modifications are at fault.

[daemonmp3]

Synopsis: SBHH on entering scenario editor whilst in the process of loading / unloading passengers or cargo.
Description: SBHH on entering scenario editor whilst in the process of loading / unloading passengers or cargo.
Reproduction:

• Start a scenario and load passengers / cargo, in the middle of loading go to the world editor, then the scenario editor.

Chris.