Atomic Systems

Shadders wrote:
Thanks for posting this Mick, sadly it made no difference to frame rates on my PC.
But it did stop the cores in use being stuck at 100%, and I'm happy it worked for you
I'm not going to moan though as there's people here that can't even run it. At least I can do that.

Good luck everyone,

Shad.

Of course the guy just wrote enable multicore in game, then disable multi core usage in windows which equals to nothing

But that multi-core button is for debug purposes anyway. Isn't it?

shaun123 wrote:If there's one piece of advice I can give, which has worked for me a treat. Turn shadows to their lowest setting or completely off. All other settings are on Medium and it runs respectably.

works on 800x600

Just checked my performance in task manager and my cpu is running at 42% running TS2012. Quad core phenom.

Hi everyone.
I'm having a bit of a problem with getting RW3 to run.
With the TSX engine off I can have my settings in the options menu up to max with no problems, in fact I see an increase in performance; but....
With these settings:

and

I get


My Computers Specs are:

Apple IMac late 2006
Windows Xp running under boot camp.
Intel Core 2 CPU 2.00 GHz
3GB of Ram
ATI Radeon X1600

Any help would be much appreciated.

4472

pjt1974 wrote:Hi Steve

Yes, the terrain and scenery are in the shade apart from within a 50 metre(or so) radius of the view point. I just thought it was becuase it was getting dark naturally

OK, a fix for you: as I suspected, the scenery in shade and poor signal visibility is down to the weather pattern. Edit your scenario and change the weather pattern to 'Hazy' - distant scenery is much improved along with signal visibility.

Hope this helps.

Kr, Steve

Have you tried it with the Billinear switched off?

Thanks Steve, Will try that in a moment

pjt1974 wrote:Have you tried it with the Billinear switched off?

Yep tried all of the Texturing Filtering options.
Same Result.

Thanks for trying to help.

I am using this on my main PC.




Gives me 22 FPS on those settings at Reading heading for London. Note I did also enable multicore after taking the screen shot.

Intel Core 2 Duo E6850 (3000MHz)
4 GB Memory
Win 7 Professional (32 bit).
Nvidia GT 430 1GB Memory + 280.26 drivers

Just done a check of my system with Steam and you can see the results in my signature.
Could someone let me know what the following means though?

Authentic AMD 1899mhz
2 Logical processors
2 Physical processors
FCMOC, SSE2, SSE3, SSSE3 all supported

We will be switching over to part 3 of the thread in a minute or two before I have to duck away for dinner.

http://forums.uktrainsim.com/viewtopic. ... 4&t=118590 will be the thread and I will make the switch at 17:50 BST i.e. 3 minutes time !

Easilyconfused wrote:I am using this on my main PC.




Gives me 22 FPS on those settings at Reading heading for London. Note I did also enable multicore after taking the screen shot.

Intel Core 2 Duo E6850 (3000MHz)
4 GB Memory
Win 7 Professional (32 bit).
Nvidia GT 430 1GB Memory + 280.26 drivers

Hi John, just tried this still no joy.
Maximum my screen can go to is 1440 x 900.

If I don't get a reply to my post above can I do a repost there?

Didn't you say you are running on Bootcamp on Apple hardware ? I have no experience of that at all sorry.

OK - that's all here folks :

Head on over to http://forums.uktrainsim.com/viewtopic. ... 4&t=118590

Sorry for the bad URL first time round