Atomic Systems

http://uktrainsim.com/filelib-info.php? ... leid=23904


Hope you enjoy

Nice to see some scenarios for Garl arriving. Thanks.

Admittedly it's nothing special or complex, I'm not that talented yet . But I think the AI and the atmosphere makes up for it

Do you have a link to the website for the East Coast HST skin?

rml345 wrote:Do you have a link to the website for the East Coast HST skin?

http://mullys.webs.com/railworksfreewaredownloads.htm

The very first download under repaints, mate. Over there there is also the 158 FirstScotrail (Barbie) livery repaint

Thanks.

im getting a "something's gone horribly wrong" message every time i try to load it don't quite know why..got all the stock! ran it through RWTools and it says im missing something like a 380 low panto, well, something along those lines, bit confused!

y2flexy wrote:im getting a "something's gone horribly wrong" message every time i try to load it don't quite know why..got all the stock! ran it through RWTools and it says im missing something like a 380 low panto, well, something along those lines, bit confused!

Yep, the electrification wires in this route are lower as in real life, so I used the low pantograph car. If you have the 380 you should have it, mate, if not just swap it for the normal one

msey0002 wrote:

y2flexy wrote:im getting a "something's gone horribly wrong" message every time i try to load it don't quite know why..got all the stock! ran it through RWTools and it says im missing something like a 380 low panto, well, something along those lines, bit confused!

Yep, the electrification wires in this route are lower as in real life, so I used the low pantograph car. If you have the 380 you should have it, mate, if not just swap it for the normal one

that's why im confused as obviously i've got the 380! ah well, gonna attempt to swap them out

That's unfortunate , I suggest you try contact RSC or TM. If it helps, on RW_Tools, it should appear as 'Class 380 PTOSLW (Low Pantograph)'

msey0002 wrote:That's unfortunate , I suggest you try contact RSC or TM. If it helps, on RW_Tools, it should appear as 'Class 380 PTOSLW (Low Pantograph)'

The scenario was asking for an "swt" Class 380 PTOSLW (Low Pantograph)". Swapped out for the Scotrail one ok, but for some reason I can't load the HST 43277 ! Service 8 I think.

Will swap that out if I can't fix it

Rod

Hiya Rod, there's the link to the East Coast HST above. No idea were the swt thing might have come from, or even what it is, but i'll swap and re up as soon as possible, thanks for the info.

http://www.mediafire.com/?wymfmu1ykei

The 380 should be better now . I'll re up on UKTS too. Apologies for the confusion

Anyone having any problems with it?

I ran the scenario through RW_Tools, as is common practice, and I too found that I was missing an "SWT" item. I swapped it out for the standard vehicle and all was OK. The drive is enjoyable, the weather and time of day make for a good atmosphere and there's plenty of passing AI traffic. Just a couple of things worth mentioning - the Paisley stop is omitted from your initial briefing and there's no message in the scenario complete box at the end. Nothing major, but worth noting for future scenarios. I would also have put a pick up instruction for Glasgow Airport so you get the 'right away' from the guard, but it's fine without too.

Thanks for uploading.

Thanks, Tractor .

I uploaded the scenario to another link in this thread without the SWT car. Thanks for your advice, will take greater care in the future . This is only my first scenario, so I need all the help I can get