Patch_CarboniaV130_Textureskvarndalen wrote:Hello
I have searched for"Brill's texturing set", but have not found the files.
Is there NO ONE here on the forum who can help me to get on the ground and the tracks
Carbonia by Gor - Missing Texture Reference
Moderator: Moderators
- vlado960
- Well Established Forum Member
- Posts: 753
- Joined: Wed Jun 25, 2008 10:21 am
- Location: Croatia
Re: Carbonia by Gor - Missing Texture Reference
- Reppo
- Established Forum Member
- Posts: 308
- Joined: Sun Oct 14, 2007 5:38 pm
- Location: Santiago de Chile
Re: Carbonia by Gor - Missing Texture Reference
kvarndalen wrote:To Reppo
Please upload this file again
http://myfreefilehosting.com/f/f5b7734194_5.02MB
Opss, I arrive too late
Thanks to vlado960 for the solution.
Enjoy Carbonia.
Regards.

The man who doesn't follow his vocation betrays himself and condemns himself to unhappiness.
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Hello
Thanks for the files, it was fine, both rail and TERRITORY.
But which train will I have to run with?
It is unusual gauge....
http://img801.imageshack.us/img801/6655/carbonia.jpg
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Hello
Excuse me for asking again.
What can be used for locomotives to this route, it's some sort of narrow gauge
Please help me, I can not find anything
Excuse me for asking again.
What can be used for locomotives to this route, it's some sort of narrow gauge
Please help me, I can not find anything
- vlado960
- Well Established Forum Member
- Posts: 753
- Joined: Wed Jun 25, 2008 10:21 am
- Location: Croatia
Re: Carbonia by Gor - Missing Texture Reference
You can try herekvarndalen wrote:Hello
Excuse me for asking again.
What can be used for locomotives to this route, it's some sort of narrow gauge
Please help me, I can not find anything
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
hellovlado960 wrote: You can try here
Corris Rly loco no 1 2ft 3in gauge
The locomotive did not fit, it must be another gauge !
That locomotive had the same gauge as another I've tried
see picture
http://img23.imageshack.us/img23/7003/s ... rbonia.jpg
-
zm4em
- Been on the forums for a while
- Posts: 157
- Joined: Mon Nov 09, 2009 8:32 pm
- Location: Antwerp Belgium
Re: Carbonia by Gor - Missing Texture Reference
por edsolis » Mar Dic 23, 2008 10:27 pm
Un sencillo esquema de las líneas sobre las que gor está trabajando, con su perfil como fondo:
- Verde: empalme de la línea León- Gijón de Renfe con el ramal al Lavadero de Sovilla (1.668 mm).
- Amarillo: línea de la Sociedad Hullera Española (600 mm), traspasada en 1967 a Hulleras del Norte S.A. (Hunosa).
- Azul: línea Ujo - Collanzo de la Sociedad General de Ferrocarriles Vasco Asturiana (1.000 mm), integrada en Feve a partir de 1972.
-Green: splice León - Gijón train with the laundry Sovilla (1,668 mm) branch line.
-Yellow: line of the Spanish Hullera society (600 mm) handed over in 1967 to Hulleras del Norte S.A. (Hunosa).
-Blue: integrated in Feve from 1972 onwards Ujo - Collanzo of Sociedad General de railway Basque Asturian (1,000 mm) line.
http://www.trensim.com/foro/viewtopic.p ... 6&start=60
Re: Carbonia
«by jjlor» Wed May 12, 2010 12: 39 pm Hello Clemmo47, path has three different track widths, almost the entire route is gauge 1000. Also has stretches of 1668mm and 600 mm. Now there is no long narrow gauge rolling stock but will be coming out.
http://www.trensim.com/foro/viewtopic.p ... &start=615
Just trying to help.
http://www.forotrenes.com/foro/viewtopi ... 3&start=60
Regards
Erik
Un sencillo esquema de las líneas sobre las que gor está trabajando, con su perfil como fondo:
- Verde: empalme de la línea León- Gijón de Renfe con el ramal al Lavadero de Sovilla (1.668 mm).
- Amarillo: línea de la Sociedad Hullera Española (600 mm), traspasada en 1967 a Hulleras del Norte S.A. (Hunosa).
- Azul: línea Ujo - Collanzo de la Sociedad General de Ferrocarriles Vasco Asturiana (1.000 mm), integrada en Feve a partir de 1972.
-Green: splice León - Gijón train with the laundry Sovilla (1,668 mm) branch line.
-Yellow: line of the Spanish Hullera society (600 mm) handed over in 1967 to Hulleras del Norte S.A. (Hunosa).
-Blue: integrated in Feve from 1972 onwards Ujo - Collanzo of Sociedad General de railway Basque Asturian (1,000 mm) line.
http://www.trensim.com/foro/viewtopic.p ... 6&start=60
Re: Carbonia
«by jjlor» Wed May 12, 2010 12: 39 pm Hello Clemmo47, path has three different track widths, almost the entire route is gauge 1000. Also has stretches of 1668mm and 600 mm. Now there is no long narrow gauge rolling stock but will be coming out.
http://www.trensim.com/foro/viewtopic.p ... &start=615
Just trying to help.
http://www.forotrenes.com/foro/viewtopi ... 3&start=60
Regards
Erik
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Hello
is this locomotive to download somewhere?
http://www.forotrenes.com/foro/viewtopi ... 3&start=60
is this locomotive to download somewhere?
http://www.forotrenes.com/foro/viewtopi ... 3&start=60
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Hello
I feel a bit repetitive now
, but what to do!
How shall I find this locomotive in the list, so I can run it?
ES_MSP_N1D_Camocha.rwp

I feel a bit repetitive now
How shall I find this locomotive in the list, so I can run it?
ES_MSP_N1D_Camocha.rwp

- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Hello
Now I just have this locomotive and it is a bit too big and wide
http://img294.imageshack.us/img294/9081 ... ialoco.jpg

Now I just have this locomotive and it is a bit too big and wide
http://img294.imageshack.us/img294/9081 ... ialoco.jpg
- alanch
- Very Active Forum Member
- Posts: 4907
- Joined: Mon Feb 27, 2006 6:07 pm
- Location: Leeds, England
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Try this conversion of a GWR railcar to metre gauge.
|
Alan
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
-
brianbwlim
- Getting the hang of things now
- Posts: 80
- Joined: Tue Sep 14, 2010 5:07 am
Re: Carbonia by Gor - Missing Texture Reference
The information page for Raillcar tells - " This is a non prototypical model, uploaded so that people have something to run on the narrow gauge in the wonderful Carbonia route".
Another metric guage loco can be found on http://www.tsnz.co.nz/downloads.php,
NZR Class TR (Fruit Salad and Red), which are some sort of shunter, so speed and power is verly limted.
Most suitable Loco for Carbonia metric guage is "Feve Alsthom Locomotive 1052".
Thus is the Blue Diesel Loco shown in Gor's screenshot.
For further info. look this link,
http://www.trensim.es/foro/viewtopic.ph ... 9df532eae2
javierfl made this loco for RS two years ago(from MSTS version, He aloso made Trainz version).
And I am sure many Spanish friends have this loco - by the screenshot they made.
But for some reason, this loco is not uploaded to trensim site yet.
Someone who knows javierf may ask him to upload to trensim site for Carbonia fans.
Another metric guage loco can be found on http://www.tsnz.co.nz/downloads.php,
NZR Class TR (Fruit Salad and Red), which are some sort of shunter, so speed and power is verly limted.
Most suitable Loco for Carbonia metric guage is "Feve Alsthom Locomotive 1052".
Thus is the Blue Diesel Loco shown in Gor's screenshot.
For further info. look this link,
http://www.trensim.es/foro/viewtopic.ph ... 9df532eae2
javierfl made this loco for RS two years ago(from MSTS version, He aloso made Trainz version).
And I am sure many Spanish friends have this loco - by the screenshot they made.
But for some reason, this loco is not uploaded to trensim site yet.
Someone who knows javierf may ask him to upload to trensim site for Carbonia fans.
- kvarndalen
- Getting the hang of things now
- Posts: 75
- Joined: Tue Nov 18, 2003 12:14 am
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
http://www.uktrainsim.com/getthumb.php? ... leid=23916
Hello
How shall I find the locomotive in this list.
I've done "Clear the Blueprint Cache"
http://img442.imageshack.us/img442/9273/onthislist.jpg
http://img688.imageshack.us/img688/2198 ... lcarbc.jpg
Please help me, I get crazy soon
Hello
How shall I find the locomotive in this list.
I've done "Clear the Blueprint Cache"
http://img442.imageshack.us/img442/9273/onthislist.jpg
http://img688.imageshack.us/img688/2198 ... lcarbc.jpg
Please help me, I get crazy soon
- alanch
- Very Active Forum Member
- Posts: 4907
- Joined: Mon Feb 27, 2006 6:07 pm
- Location: Leeds, England
- Contact:
Re: Carbonia by Gor - Missing Texture Reference
Look for RScott and Addon.
Alan
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.
My railway photos are now on Google + - links to the albums are in this thread http://forums.uktrainsim.com/viewtopic. ... 9&t=149558
Lots of steam and early diesels from 1959 to 1963.

