Somewhere to flex the Sutton Belle & Flyer Muscles!
Moderator: Moderators
- andrewgadd
- Well Established Forum Member
- Posts: 910
- Joined: Sat Aug 02, 2003 1:22 pm
- Location: CME Office, Bodgit & Scarper Engineering.
- Contact:
Somewhere to flex the Sutton Belle & Flyer Muscles!
I have on disc, a miniature route started many months ago. There is no scenery, just a long out and back loop of track with turning triangle plus many gradients.
It takes about 10 to 20 minutes to complete the circuit and it is possible to turn the loco on the triangle and do the route as many time as you like!
I think to make the route at least plausible I would need to add some bridges and water crane, but it would be an quick solution to a route for Tim’s two loco’s.
So guys, do you want an upload?
Download size would only be about 500KB.
Below is a map of the route.
<IMG width="593" height="423" SRC="http://www.atomic-album.com/showPic.php ... AMRMap.jpg">
It takes about 10 to 20 minutes to complete the circuit and it is possible to turn the loco on the triangle and do the route as many time as you like!
I think to make the route at least plausible I would need to add some bridges and water crane, but it would be an quick solution to a route for Tim’s two loco’s.
So guys, do you want an upload?
Download size would only be about 500KB.
Below is a map of the route.
<IMG width="593" height="423" SRC="http://www.atomic-album.com/showPic.php ... AMRMap.jpg">
Last edited by andrewgadd on Wed Apr 07, 2004 9:52 am, edited 1 time in total.
Andrew, CME.
Bodgit & Scarper Engineering
___________________________________
I’ve suffered for my art, now its your turn.
Bodgit & Scarper Engineering
___________________________________
I’ve suffered for my art, now its your turn.
- Christopher125
- Very Active Forum Member
- Posts: 2629
- Joined: Sun Jun 09, 2002 12:00 am
- Location: Sandown, Isle of Wight (hooray!)
- pitleyfalley
- Builder of the Southwold Railway Route
- Posts: 2366
- Joined: Sat Dec 13, 2003 11:56 pm
- Location: Tinkering with a new project
its going to be xtrack i expect. for that just go to
http://www.uktrainsim.com/filelib-info. ... 964f27f6c8
and mabe
http://www.uktrainsim.com/filelib-info. ... 964f27f6c8
as well
http://www.uktrainsim.com/filelib-info. ... 964f27f6c8
and mabe
http://www.uktrainsim.com/filelib-info. ... 964f27f6c8
as well
- andrewgadd
- Well Established Forum Member
- Posts: 910
- Joined: Sat Aug 02, 2003 1:22 pm
- Location: CME Office, Bodgit & Scarper Engineering.
- Contact:
I’ve just hit a small snag.
The route was built using default track (x4, if you like) and Tim’s loco’s are scaled to fit UKTrueScale (x2). I will need to chat with Tim and see if he is willing for me to upload a “extraâ€
The route was built using default track (x4, if you like) and Tim’s loco’s are scaled to fit UKTrueScale (x2). I will need to chat with Tim and see if he is willing for me to upload a “extraâ€
Andrew, CME.
Bodgit & Scarper Engineering
___________________________________
I’ve suffered for my art, now its your turn.
Bodgit & Scarper Engineering
___________________________________
I’ve suffered for my art, now its your turn.
- saddletank
- Very Active Forum Member
- Posts: 14183
- Joined: Mon Dec 03, 2001 12:00 am
- Location: UK East Midlands
- Frsimplex1993
- Building the West Lancashire Route
- Posts: 2321
- Joined: Tue Aug 19, 2003 9:46 am
- Location: Ffestiniog Railway
- Contact:
Definate upload (please). There is plenty of other x2 stock we could run, because it looks like a good place just to run the stock on! GREAT ROUTE PLAN!!
Could you also upload your edited version of the 'Baldwin Columbia' please? Thanks.
Cheers,
William a.k.a Silly Billy
http://www.freewebs.com/shrailway
http://www.freewebs.com/joflrailway
http://www.freewebs.com/railmachinesltd
William a.k.a Silly Billy
http://www.freewebs.com/shrailway
http://www.freewebs.com/joflrailway
http://www.freewebs.com/railmachinesltd