Noticed this one last night while fiddling about with Thames - Mersey that when the main AE window is open and you're not 'doing' anything i.e. the new service window etc is open that the AE maxes out my 2.4 ghz athlon. Oddly the CPU useage goes to 0% when you open the new service window etc.
Thought it was due to it being a big route but investigated with a couple of much smaller routes and found the same.
Has anyone else noticed this happening?
Alex
AE and CPU at 100%
Moderator: Moderators
-
Breedlings
- Been on the forums for a while
- Posts: 242
- Joined: Sat Feb 15, 2003 12:14 pm
- Location: Newton-in-Furness
- Contact:
AE and CPU at 100%
<IMG width="350" height="186" SRC="http://album.atomic-systems.com/showPic ... b_logo.jpg">
-
Backfoot2002
- Very Active Forum Member
- Posts: 2806
- Joined: Tue Dec 17, 2002 9:39 pm
- Location: Sheffield
Happens on mine, I dont really take any notice of it to be honest, just as long as i can do other things too, such as surf the net for train times, routes etc. 
Anton
Anton
[album 70528 acm_paintworks_sig.jpg]
| Intel Core i5 2500K (Overclocked to 4.0Ghz) | Gigabyte GA-Z77-D3H | 8GB Corsair Vengeance Memory | ATI Radeon HD5770 1GB |120GB OCZ SSD (OS & RW) | 2x1TB 7200rpm HDD (Storage) |
| Intel Core i5 2500K (Overclocked to 4.0Ghz) | Gigabyte GA-Z77-D3H | 8GB Corsair Vengeance Memory | ATI Radeon HD5770 1GB |120GB OCZ SSD (OS & RW) | 2x1TB 7200rpm HDD (Storage) |
-
alan2
- Peak Rail Route Author
- Posts: 5512
- Joined: Tue Jan 01, 2002 12:00 am
- Location: Secret Routebuilders Castle lost on the way to the toilet!
Open Task manager and set the history to a long time....
Start any part of Trainsim. The sim, Activity editor, Route editor....
All take processor usage to 100% on any machine.
I have 2.0ghz, 2.4ghz, 3000 Athlon. and all max out with trainsim.
Start any part of Trainsim. The sim, Activity editor, Route editor....
All take processor usage to 100% on any machine.
I have 2.0ghz, 2.4ghz, 3000 Athlon. and all max out with trainsim.
Alan Heath
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.