Swansea Problems Resolved
Moderator: Moderators
- dforrest
- Very Active Forum Member
- Posts: 6187
- Joined: Wed Jun 05, 2002 12:00 am
- Location: St. Vincent and the Grenadines (and in an earlier life, Hull)
Swansea Problems Resolved
The fix downloaded a short while ago has completely cured all the freezing problems I was having on the route.
- alisterbetts
- Very Active Forum Member
- Posts: 1554
- Joined: Mon Jan 14, 2002 12:00 am
- Location: City of Bristol, UK
- Contact:
Excellent!!!!! Great to have all my routes working now.......!
Lost your love of life? Too much apple pie!
Have a look at my pics at http://alisterbetts.fotopic.net/
Have a look at my pics at http://alisterbetts.fotopic.net/
- davep
- Very Active Forum Member
- Posts: 1469
- Joined: Tue Sep 10, 2002 6:11 pm
- Location: Ely, Cambridgeshire, England
Yeah. I did just that. All sorted now. Brilliant. Works a treat.
Last edited by davep on Fri Nov 01, 2002 7:02 pm, edited 2 times in total.
Asus Z97-K. Intel Core i7 4790K @ 4 GHz. 3GB NVidia EVGA GTX780Ti. 16GB DDR3 RAM. Sound Blaster Z. Windows 10 64 bit.
2x960GB SSDs, 3x2TB internal HDDs and 2x1TB & 1x2TB external HDDs.
Running TS @ 3840x2160 on a 4k TV.
2x960GB SSDs, 3x2TB internal HDDs and 2x1TB & 1x2TB external HDDs.
Running TS @ 3840x2160 on a 4k TV.
- alan2
- Peak Rail Route Author
- Posts: 5512
- Joined: Tue Jan 01, 2002 12:00 am
- Location: Secret Routebuilders Castle lost on the way to the toilet!
johnarran wrote:Hi, I'm glad you found the fix useful. Thanks to Andy2 for this one. Hope you all enjoy the route now.
No it's Alan2
Me.
Glad it work's ok for you all.
Alan Heath
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
I am very interested in reading all freezes are now fixed. I find some of the points at start of simulation, fail to react to the key G presses.
Another error that occurs in my copy of Swansea, is taking the first point to the left after start, train proceeds until just reaching the first bridge. Train just freezes the computer, until Esc/Spacebar is pressed once or twice, and after a short pause the simulation jumps into action, travelling to the first station. Remainder of route continues to terminus with no further mishaps. I find Swansea route very well programmed, with excellant graphics. Any suggestions as to rectifying this one error, would be most appreciated. I have installed the zip file, required to remove the errors mentioned, except for the one freeze up.
Another error that occurs in my copy of Swansea, is taking the first point to the left after start, train proceeds until just reaching the first bridge. Train just freezes the computer, until Esc/Spacebar is pressed once or twice, and after a short pause the simulation jumps into action, travelling to the first station. Remainder of route continues to terminus with no further mishaps. I find Swansea route very well programmed, with excellant graphics. Any suggestions as to rectifying this one error, would be most appreciated. I have installed the zip file, required to remove the errors mentioned, except for the one freeze up.
- alan2
- Peak Rail Route Author
- Posts: 5512
- Joined: Tue Jan 01, 2002 12:00 am
- Location: Secret Routebuilders Castle lost on the way to the toilet!
I found this error on my first install. Don't know what it was but I removed the Swansea route and re-installed it.
then I made the patch and it was OK?!.
So i would try the same. uninstall and then install the patch again.
If this fails download Route Riter v3.7.7 and uncompress all the world file's. then re-compress them again!?. This may help but it take's a long time, Took me about 30 Min's on a 2 GHz pc.
then I made the patch and it was OK?!.
So i would try the same. uninstall and then install the patch again.
If this fails download Route Riter v3.7.7 and uncompress all the world file's. then re-compress them again!?. This may help but it take's a long time, Took me about 30 Min's on a 2 GHz pc.
Alan Heath
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
Hi alan 2,
I tried to uninstall and reinstall Swansea plus the patch several times, still errors persists. It could be, that it functions better on some computers than others. Computer make up, are like people, not two alike.
Still I look forward to download this excellent software title, when all the faults have been ironed out.
I tried to uninstall and reinstall Swansea plus the patch several times, still errors persists. It could be, that it functions better on some computers than others. Computer make up, are like people, not two alike.
Still I look forward to download this excellent software title, when all the faults have been ironed out.
- alan2
- Peak Rail Route Author
- Posts: 5512
- Joined: Tue Jan 01, 2002 12:00 am
- Location: Secret Routebuilders Castle lost on the way to the toilet!
Would like to mention that this route uses alot of Dynamic Track which may be causing the error's you are seeing.
The best solution may be to wait until John Arran to finish another version of the route and re-upload it.
He has mentioned about re-building the Dynamic Track Section which is causing the problem's at swansea.
The best solution may be to wait until John Arran to finish another version of the route and re-upload it.
He has mentioned about re-building the Dynamic Track Section which is causing the problem's at swansea.
Alan Heath
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
Why does DOS never Say Excelent Command or filename ?!!?!??
To Err is human, computers output the errors at higher speed.
- johnarran
- Established Forum Member
- Posts: 303
- Joined: Sun Dec 30, 2001 12:00 am
- Location: Swansea, UK
I have deleted all the offending track pieces and the offending snap platforms. Cockett station now has normal platforms and all dynamic track has been relaid. The new version of the route is now also Xtracks compatible and runs with Tsection.dat v010. As a result of relaying track I now have to redo the signals and the new version will be ready to upload.
Only problem is finding the time to place the signals 'cos IKB and myself are busy doing and extended version Swansea-Milford in Auran Trainz.
It's gonna be quite a route. Anyway, I promise to find the time to lay the signals this coming weekend and upload the new version then.
John
Only problem is finding the time to place the signals 'cos IKB and myself are busy doing and extended version Swansea-Milford in Auran Trainz.
John