Rear Cab View

widdicombe · Post by **widdicombe** » Tue May 02, 2006 6:26 pm

I want to put a view from the rear cab of a Class 73 in an existing model so that it works when pressing the 5 key.

I have achieved a similar result on a steam loco to give a "head inside" driving view, but I'm unsure of where to put the required information in the loco's eng file.

Any ideas?

Cheers

Dave

jbilton · Post by **jbilton** » Tue May 02, 2006 7:02 pm

Hi Dave
It needs to go into the eng file.....try between friction and brake equipment ,as below (dont forget to alter the sound line BTW)

Friction (
100N/m/s 1 -1mph 0 1
5.1N/rad/s 1 -1rad/s 0 1
)

Inside (
PassengerCabinFile ( 73002B.s )
PassengerCabinHeadPos ( 0.69 2.82 -6.85 )
RotationLimit ( 35 360 0 )
StartDirection ( 8 105 0 )
Sound ( "cl73_DE_cab.sms" )
)

BrakeEquipmentType( "Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )

Cheers
Jon

widdicombe · Post by **widdicombe** » Tue May 02, 2006 8:29 pm

Thanks Jon!

That worked a treat!

Dave

patkins03 · Post by **patkins03** » Wed May 03, 2006 5:15 pm

how would i do this for a voyger? would like to be able to revese using a cab setting instead of the external camera?

MuzTrem · Post by **MuzTrem** » Wed May 03, 2006 5:40 pm

The same as above but in the eng file for the trailer car. However, this will only work if none of the other coaches have passenger views.

widdicombe · Post by **widdicombe** » Wed May 03, 2006 6:03 pm

If there is a consist where 2 or more cars have a passenger view which one would work when the 5 key is pressed?

Dave

delticcity · Post by **delticcity** » Wed May 03, 2006 6:29 pm

I think its the one furthest forward in the consist.