Posted: Mon Dec 06, 2004 4:57 am
I have copied the siglight.ace file over, overwriting the other one, but the lights still seem to be huge!
Atomic Systems
Atomic Systems Forums
https://forums.uktrainsim.com/
London - Southampton Help, Information and News Thread
Page 4 of 23
Posted: Mon Dec 06, 2004 9:18 am
I have been holding back on my activities until getting hold of the 'public version' of the route so expect to see some from me later this month
Posted: Mon Dec 06, 2004 12:16 pm
Hi
I downloaded it last night, re-installed the v0.9 route, ran install-me.bat, and installed v1.1. It all worked straight out of the box for me.
Good work
David.D
I downloaded it last night, re-installed the v0.9 route, ran install-me.bat, and installed v1.1. It all worked straight out of the box for me.
Good work
David.D
Posted: Mon Dec 06, 2004 1:29 pm
I installed original, the the newest of the updates and some bright lights, Still looking a bit big if I may say so
Good stuff tho mate, keep it up
Good stuff tho mate, keep it up
Posted: Mon Dec 06, 2004 3:12 pm
Hi Rich,
I have a problem with a missing Road2LStrt5m.s file, I get errors saying this file could not be loaded whilst loading the route, and also around swaythling stn.
Many Thanks
Graham
I have a problem with a missing Road2LStrt5m.s file, I get errors saying this file could not be loaded whilst loading the route, and also around swaythling stn.
Many Thanks
Graham
Posted: Mon Dec 06, 2004 3:31 pm
Further to my last message, i ran Route Riter over the route, and the following report was produced, can anyone help me out?
Graham
car1.sd contained an invalid Shape file reference, but has been corrected.
car2.sd contained an invalid Shape file reference, but has been corrected.
car4.sd contained an invalid Shape file reference, but has been corrected.
rifeathers.sd contained an invalid Shape file reference, but has been corrected.
rt3aspjno3.sd contained an invalid Shape file reference, but has been corrected.
rt3aspjno4.sd contained an invalid Shape file reference, but has been corrected.
rt4aspjno3.sd contained an invalid Shape file reference, but has been corrected.
rt4aspjno4.sd contained an invalid Shape file reference, but has been corrected.
telepole.sd contained an invalid Shape file reference, but has been corrected.
TheatreBox.sd contained an invalid Shape file reference, but has been corrected.
TheatreBoxSQ.sd contained an invalid Shape file reference, but has been corrected.
truck1.sd contained an invalid Shape file reference, but has been corrected.
Shape file Road2l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2l20deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt200m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt20m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt5m.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l10deg.s is missing from your route, no alternative is available in the default routes.
Shape file WhitePlat10mEnd.s is missing from your route, no alternative is available in the default routes.
ERRORS WERE NOTED, DO NOT COMPACT ROUTE UNTIL ANY MISSING FILES ARE REPLACED.
Graham
car1.sd contained an invalid Shape file reference, but has been corrected.
car2.sd contained an invalid Shape file reference, but has been corrected.
car4.sd contained an invalid Shape file reference, but has been corrected.
rifeathers.sd contained an invalid Shape file reference, but has been corrected.
rt3aspjno3.sd contained an invalid Shape file reference, but has been corrected.
rt3aspjno4.sd contained an invalid Shape file reference, but has been corrected.
rt4aspjno3.sd contained an invalid Shape file reference, but has been corrected.
rt4aspjno4.sd contained an invalid Shape file reference, but has been corrected.
telepole.sd contained an invalid Shape file reference, but has been corrected.
TheatreBox.sd contained an invalid Shape file reference, but has been corrected.
TheatreBoxSQ.sd contained an invalid Shape file reference, but has been corrected.
truck1.sd contained an invalid Shape file reference, but has been corrected.
Shape file Road2l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2l20deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt200m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt20m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt5m.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l10deg.s is missing from your route, no alternative is available in the default routes.
Shape file WhitePlat10mEnd.s is missing from your route, no alternative is available in the default routes.
ERRORS WERE NOTED, DO NOT COMPACT ROUTE UNTIL ANY MISSING FILES ARE REPLACED.
Posted: Mon Dec 06, 2004 4:04 pm
Not certain, try this. I also have this problem
|
Posted: Mon Dec 06, 2004 4:15 pm
Glad to hear someone got it to work properly!ddibben wrote:Hi
I downloaded it last night, re-installed the v0.9 route, ran install-me.bat, and installed v1.1. It all worked straight out of the box for me.
Good work
David.D
Do you think you could post a screenshot so i can see how big? If you find them too big just edit the radii in the sigcfg file to something smaller or untill they look better.mjt222 wrote:I installed original, the the newest of the updates and some bright lights, Still looking a bit big if I may say so
Good stuff tho mate, keep it up
Graham,
The shape files you have listed were included in the route, along with the textures. It is likely that you have miss placed them, and they are in the wrong folder, probably something to do with your extractor.
If you go into the L-S ROUTE folder, and then SHAPES, scroll through and see if they are there. If not, then copy and paste them from the zip file (move to temp location first, then copy and paste). That should work. If not, i'm stuck!!
Cheers
Posted: Mon Dec 06, 2004 5:01 pm
Thanks Rich,
I carefully checked all the zip files and couldn't find them, However, I have found the solution in the new roads file listed above and also the Magnetic Platform Kit number 2 i think, it's the "White" one.
I found also downloading those files satisfied route riter and stops errors on loading.
Graham
I carefully checked all the zip files and couldn't find them, However, I have found the solution in the new roads file listed above and also the Magnetic Platform Kit number 2 i think, it's the "White" one.
I found also downloading those files satisfied route riter and stops errors on loading.
Graham
Posted: Mon Dec 06, 2004 5:07 pm
At this moment i am installing the whole thing myself to test it, and make sure it all works (which clearly it does not 
)
Graham, have you got my email, you may find it useful (as will I )
Cheers
)Graham, have you got my email, you may find it useful
(as will I )Cheers
Posted: Mon Dec 06, 2004 5:26 pm
I am pleased to report that the 'test' worked with success bar two things:
1) I forgot to run the install.me bat file
2) (More seriously) The SigLight file may not overwrite, and so a manual delete the origional and replace with the new may be necessary.
Other than that it worked fine, and so as long as you have what you need (described in v0.9) you should be fine.
File 2 has yet again been edited to remove the errors posted above by Graham K. It will be uploaded.....well now
Cheers, and please be patient!
1) I forgot to run the install.me bat file
2) (More seriously) The SigLight file may not overwrite, and so a manual delete the origional and replace with the new may be necessary.
Other than that it worked fine, and so as long as you have what you need (described in v0.9) you should be fine.
File 2 has yet again been edited to remove the errors posted above by Graham K. It will be uploaded.....well now
Cheers, and please be patient!
Posted: Mon Dec 06, 2004 5:59 pm
Hi Rich,
Have manually deleted ther sig file and it works fine now.
Im getting a problem when departing Southampton towards Eastleigh with the message
Failed to laod shape UKFS etc etc, and yet all UKFS is loaded - weird. I will keep digging and post of I find a problem.
Here is my list from Route Riter
Shape file Road2l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2l20deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt200m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt20m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt5m.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l10deg.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs_c_1x100m_2d5_cr.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs_c_2x250m_20d.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_10m058.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_11m041.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_3m124.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_4m891.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_5m013.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_6m812.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_7m391.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_7m653.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_8m621.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_9m219.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_9m823.s is missing from your route, no alternative is available in the default routes.
Cheers
Martin
Have manually deleted ther sig file and it works fine now.
Im getting a problem when departing Southampton towards Eastleigh with the message
Failed to laod shape UKFS etc etc, and yet all UKFS is loaded - weird. I will keep digging and post of I find a problem.
Here is my list from Route Riter
Shape file Road2l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2l20deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt200m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt20m.s is missing from your route, no alternative is available in the default routes.
Shape file Road2LStrt5m.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l05deg.s is missing from your route, no alternative is available in the default routes.
Shape file Road4l10deg.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs_c_1x100m_2d5_cr.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs_c_2x250m_20d.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_10m058.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_11m041.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_3m124.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_4m891.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_5m013.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_6m812.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_7m391.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_7m653.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_8m621.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_9m219.s is missing from your route, no alternative is available in the default routes.
Shape file ukfs3r_is_9m823.s is missing from your route, no alternative is available in the default routes.
Cheers
Martin
Posted: Mon Dec 06, 2004 6:40 pm
Hi Martin,
Ensure you have installed the UK Finescale Track System, which is available from the UKTS homepage under "quick picks" also make sure you have it updated, with all packs.
Also try downloading the new roads 3.2 listed earlier in this thread, and then also try downloading the Magnetic Platform Kit 1 & 2 fro the UKTS libraries, if you haven't already.
Hope this is some help
Graham
Ensure you have installed the UK Finescale Track System, which is available from the UKTS homepage under "quick picks" also make sure you have it updated, with all packs.
Also try downloading the new roads 3.2 listed earlier in this thread, and then also try downloading the Magnetic Platform Kit 1 & 2 fro the UKTS libraries, if you haven't already.
Hope this is some help
Graham
Posted: Mon Dec 06, 2004 6:44 pm
is it possible to bring out the whole roue and patch on 1 cd and sell it on uktrainsim?beacause i couldnt get it to work so i wouldnt mind using it on cd with all the stock and acticities to.I'll pay a tenner to anyone who can do that for me
Posted: Mon Dec 06, 2004 7:57 pm
Martin,
make sure your UKFS install is v3.15. those missing track shapoes are all ukfs shapes, mostly 3rd rail Interworking Straights, but there are a couple of curves (one of them looks an odd name) which were issued in the last v.3.15 update.
The roads are all NewRoads shapes, I believe. Make sure you have the latest.
Magnetic Platforms are listed as roads, but the shape files are named as platforms.
You might try reloading UKFS and NewRoads. then reinstall the route.
make sure your UKFS install is v3.15. those missing track shapoes are all ukfs shapes, mostly 3rd rail Interworking Straights, but there are a couple of curves (one of them looks an odd name) which were issued in the last v.3.15 update.
The roads are all NewRoads shapes, I believe. Make sure you have the latest.
Magnetic Platforms are listed as roads, but the shape files are named as platforms.
You might try reloading UKFS and NewRoads. then reinstall the route.