SE&CR O1

1crick14a · Post by **1crick14a** » Sun Aug 29, 2004 7:33 am

Nice one Paul inside valve gear is great can you tell me were there
2 injectors on these or was one a pump..??

Cheers nice model.........Regards, Rick

dforrest · Post by **dforrest** » Sun Aug 29, 2004 11:51 am

Very nice loco. The aliasing path to the common files in the sound files needs correcting. "../uk_shared/x_steam_rail_high1a.wav" should be "../../common.sound/uk_shared/x_steam_rail_high1a.wav" (and three similar entries).

.

chrisj94 · Post by **chrisj94** » Sun Aug 29, 2004 5:01 pm

Absoulely great model paul!
Is the whistle meant to be in such short bursts?
I have tried adjusting my sounds quility,no difference,and ive got the 2cyl sounds set installed

decapod · Post by **decapod** » Sun Aug 29, 2004 7:52 pm

Not sure about the injectors Rick, I can send a photo of the cab if that's any help (but the model is fairly close)

Thanks for the fix Dave, watch out for two more repaints coming shortly - SR and BR...

The whistle is a single shot sound of me playing with the K&ESR P class whistle, they were not long blasts and not really suitable for looping.

1crick14a · Post by **1crick14a** » Sun Aug 29, 2004 8:03 pm

Cheers Paul, like to see the cab picture knowing you on second point I bet it is........little tip for you on eng.file and it ain't bad, injector cones scale them down to 9mm the ones you have are equivalent to a Duchess...OK

Looking forward to the next version Regards Rick

chrisj94 · Post by **chrisj94** » Sun Aug 29, 2004 8:22 pm

Hey,paul,thats cool,nice to see some custom sounds there!
I tryed adding my face into the firemens figure,but whenever i export it in TGA2,ill open it up in Shapeviewer,and the textures on the footplate crew go wierd,loads of white lines dashed across them.
Any ideas why?
Thanks
Chris

decapod · Post by **decapod** » Mon Aug 30, 2004 10:29 am

Chris,
When you convert the crew ACE, make sure it is a 24 bit BMP file and convert it back using TGAtool2 with no alpha.

supergoods · Post by **supergoods** » Mon Aug 30, 2004 10:48 am

Rick, I think there are two live steam injectors, maybe only one originally, however the device on the right hand side which looks a little like a weir pump on end is, I think, the steam reverser which the South Eastern were partial to on their locomotives.

decapod · Post by **decapod** » Mon Aug 30, 2004 10:56 am

Almost certainly a steam reverser. I used one on the P Class during my driving day - something we can't model with MSTS cabviews

Christopher125 · Post by **Christopher125** » Mon Aug 30, 2004 2:08 pm

Hi

(Great Model btw) Rick, are you working on a manual firing .eng file? If so, would it be possible to send the file over? I'm getting the constant blowing off difficulty again.

Chris

1crick14a · Post by **1crick14a** » Mon Aug 30, 2004 3:04 pm

Ian

Would think so looking at it having a weir pump I'll make mine so
only a guess this but cones say 7 and 9 and the feed line around the
30 mark....but stress I'm guessing, you have to see if it holds boiler up
and adjust...........

InjectorLimits1 ( 50psi 0.30 1 )
InjectorLimits2 ( 60psi 0.23 1 )

Paul reverser yup shame we do not have enough cab builders
close to it would be one of the BA Kim Durose GWR ones but smaller.

Chris I'll drop you a file over later OK

Rick

decapod · Post by **decapod** » Mon Aug 30, 2004 7:37 pm

I may do a rendered cab view for it eventually, but we can't model the reverser correctly as the lever position is actually the change of direction of the reverser, not the reveser setting.

chrisj94 · Post by **chrisj94** » Mon Aug 30, 2004 7:54 pm

Thats great pual,im currently using the cabs that came with the SC1920 CD,serve the purpose,just the scotman regulator drives me crazy!

decapod · Post by **decapod** » Tue Aug 31, 2004 8:58 am

BR version now uploaded - with all the ENG and sound changes suggested in this thread..

BR Class O1 0-6-0 [1518589 bytes] - BR01B.zip
File ID: 10084 Date: 31 Aug 2004 - 1479 Downloads

SR version is pending me getting the "sunshine" lettering correct for 1941-47 livery.

ianmacmillan · Post by **ianmacmillan** » Tue Aug 31, 2004 11:04 am

A teriffic model.

It look so similar to a Calley jumbo I'm going to renumber it.

Can I request a 700. That's a Highland barnie to me.