MEP - Morning parcels from Cambridge

[scampispeedway]

Hi Art, when I did this Activity for the first time the other day, I had forgotten about the problem with the MEP-MK1-TC-BG wagon having an extra
line in the file, I refer to the one that has a entry ( 26) which in 2014 was the reason given for not being able to reload a saved position.
I deleted this line using Context and saved the file and tried the run again and saved the Activity straight away and reloaded the save and after
checking that all the stock had wheels which were missing before, was able to carry on down the line.
So on my computer using XP this activity works o.k. and will have a go at the whole run later on confident that I will have no trouble with reloading
saves.


Bob

[abclare]

Hi Bob.

Well done mate I would be unable to something like that as i am on Windows7.

[michaelhendle]

Art
It doesn't matter what operating system you are using,you can do in windows 7 as well the extra Line is in the wag file,just open it a delete the extra line
Mike

[abclare]

Hi Mike.
No Mike I could not attempt doing any thing like that sorry to say but thanks anyway.

Art.

[michaelhendle]

Art
Unless you you alter the wag file every activity that uses that coach could give you problems
Mike

[abclare]

Hi Mike.

I think that Ged will probable help me in some way I hope any way

Art.

[aj52mdy]

Hi Mike.

I think that Ged will probable help me in some way I hope any way

Art.

Hi Art.
I too have windows 7 (Home) To accsess MEP/0-Mini-route Locate your Local disk drive.
open mep1.0-Miniroute Click on train simulator, click on Trains then click on trainset.
Scroll down until you find the file the file MEP-MK1-TC
Click to open it Wag file MEP-TC_BG (Lo0cated 7th from the top
I suggest that you drag this file to desktop and COPY it (Just in case)
open the wag file which I have copied part of it below.

BrakeEquipmentType ( "Handbrake, Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )
BrakeSystemType ( "Air_single_pipe" )
MaxBrakeForce( 30kN )
MaxHandbrakeForce( 30kN )
EmergencyBrakeResMaxPressure( 100 )
TripleValveRatio( 2.5 )
MaxReleaseRate( 7 )
MaxApplicationRate( 5 )
MaxAuxilaryChargingRate( 70 )
EmergencyResCapacity( 100 )
EmergencyResChargingRate( 50 )
BrakeCylinderPressureForMaxBrakeBrakeForce( 64 )
( 26 ) ART THIS IS THE LINE TO DELETE

Adheasion ( 0.2 0.4 2 0 )
DerailRailHeight ( 10cm )
DerailRailForce ( 2.5*32t )
DerailBufferForce ( 1000kN )
WheelRadius ( 0.4825m )
NumWheels ( 4 )

Place your cursour in the left hand margin on the empty line and click your mouse once
so that the verticle line is flashing.
Now do this gently but with the Backspace key press once, the cursor should now have jumped next to the closed bracket lifting thew text below up one space.
Now tap backspace key one at a time to delete ) space 6,2 space and STOP when you have deleted (
Your wag file should now look like this below.

BrakeEquipmentType ( "Handbrake, Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )
BrakeSystemType ( "Air_single_pipe" )
MaxBrakeForce( 30kN )
MaxHandbrakeForce( 30kN )
EmergencyBrakeResMaxPressure( 100 )
TripleValveRatio( 2.5 )
MaxReleaseRate( 7 )
MaxApplicationRate( 5 )
MaxAuxilaryChargingRate( 70 )
EmergencyResCapacity( 100 )
EmergencyResChargingRate( 50 )
BrakeCylinderPressureForMaxBrakeBrakeForce( 64 )

Adheasion ( 0.2 0.4 2 0 )
DerailRailHeight ( 10cm )
DerailRailForce ( 2.5*32t )
DerailBufferForce ( 1000kN )
WheelRadius ( 0.4825m )
NumWheels ( 4 )

In the top right hand corner you should have a red X Press this once then press save
Job Done
Hope this helps
Cheers
Andy

[abclare]

Hi Andy. Thank you that is so good of you to explain all that to me but at my time of life I am just not up to doing that like I would worry about messing up my EMP completely then I would have nothing


Art.

[aj52mdy]

Hi Andy. Thank you that is so good of you to explain all that to me but at my time of life I am just not up to doing that like I would worry about messing up my EMP completely then I would have nothing


Art.

Hi Art.
Yes I fully understand what you are saying and where yoy are coming from, I have very limited computer knowledge myself.
Do you not have anyone that could help you? if you showed them what needs to be done?
Sadly without the fix You will not be able to save this activity and this would also apply to any other activities that use this Wag file.
I really do not know what else to suggest
Cheers
Andy

[abclare]

Hi Andy Yes mate I have got help usually as you will see from my post of a few days ago Ged does very often helps me and we use the Team Viewer which works very well.

Art

[abclare]

Hi Andy & All.
I am now up & running again thanks again to Ged he said that it was a missing wheel

Art.(an older one)

[slipperman12]

Hi Art

he said that it was a missing wheel

I must just put the record straight! I think you misunderstood what I said, because It was the ( 26 ) in the BG coach wag file, as previously reported.

Art re-installed MEP a few months ago and, although his earlier installation had been amended, this one wasn't.

I'm pleased you're running OK now, Art

Cheers,
Ged

[abclare]

Hi Ged.

Sorry yes you are correct I remember now got it wrong again mate.

Art (an older one0

[abclare]

Hi,
All going well so far until I got to Hitchin reversed back to collect my Waggons but can only take half of them just would not take the all do I am just going on with what I have got now at Harringay and still not having any problems with saves.

Art (an older one)

[abclare]

Hi.
Running it again and at Hitchin this time I was able to collect all the waggons now on my way to WGC


Art,(an older one)