Is there a reasonably representative working cab view for class 52 "Western" locos?
Tony
Class 52 cab
Moderator: Moderators
-
Tonysmedley
- Very Active Forum Member
- Posts: 3382
- Joined: Mon May 26, 2003 11:18 am
- Location: SPALDING UK
Class 52 cab
Tony (the old one)
-
michaelhendle
- Very Active Forum Member
- Posts: 8189
- Joined: Thu May 27, 2004 4:15 pm
- Location: Peterborough originally Hounslow &Durban
Re: Class 52 cab
Tony,
If you've got the Paddington-Penzance CD you can use the cabs from the 52's in it otherwise the only other correct cabs are in the ELR Deisel Hydrulic Pack,it also has the Warships and Hymeks as well in it,most of the Hydrulics in the libery use them.
If you've got the Paddington-Penzance CD you can use the cabs from the 52's in it otherwise the only other correct cabs are in the ELR Deisel Hydrulic Pack,it also has the Warships and Hymeks as well in it,most of the Hydrulics in the libery use them.
Mike
Ex South African Railways Employee,My favorite loco is a SAR\SAS 25C Condensing Locomotive
Ex South African Railways Employee,My favorite loco is a SAR\SAS 25C Condensing Locomotive
- jbilton
- Very Active Forum Member
- Posts: 19267
- Joined: Fri Oct 10, 2003 12:08 pm
- Location: At home ..waiting to go to Work.
- Contact:
Re: Class 52 cab
Hi Tony
If you mean by 'working' animated , then this one is of no use.
However it is driveable, for those without the Class 52 cabview.
Cheers
Jon
If you mean by 'working' animated , then this one is of no use.
|
However it is driveable, for those without the Class 52 cabview.
Cheers
Jon
------------------------Supporting whats good in the British community------------------------


-
Tonysmedley
- Very Active Forum Member
- Posts: 3382
- Joined: Mon May 26, 2003 11:18 am
- Location: SPALDING UK
Re: Class 52 cab
I downloaded the V200, the German equivalent of the Western class, from the German MSTS site and it had quite a good cab view.
However, when I transferred it to the Western, and amended the Western eng file, the Forward/ Reverse and the throttle control did not work, although the cab itself was excellent - if you could accept a speedometer in Kph and some very small German wording on some instruments. It is also right hand drive.
Tony
However, when I transferred it to the Western, and amended the Western eng file, the Forward/ Reverse and the throttle control did not work, although the cab itself was excellent - if you could accept a speedometer in Kph and some very small German wording on some instruments. It is also right hand drive.
Tony
Tony (the old one)
Re: Class 52 cab
Hello Tony.Tonysmedley wrote:I downloaded the V200, the German equivalent of the Western class, from the German MSTS site and it had quite a good cab view.
However, when I transferred it to the Western, and amended the Western eng file, the Forward/ Reverse and the throttle control did not work, although the cab itself was excellent - if you could accept a speedometer in Kph and some very small German wording on some instruments. It is also right hand drive.
Tony
The V200 or DB 220/221 were actually The forerunner of the warship class.
This may be of help to you from the CD ordering page
Paddington to Penzance 2.5
A re-release of Derick Joy and Dave Pascoe's fantastic Paddington to Penzance route, the route is unchanged (other than very minor scenery replacements), but there is a new stock pack, including some of Chris Baily's Westerns, Warships and Hymeks! £4.80 (edit: plus a months extra premium membership)
I have the original Westerns Warships and Hymek CD which comes with authentic Cabviews and sound files.
Cheers
Andy
-
michaelhendle
- Very Active Forum Member
- Posts: 8189
- Joined: Thu May 27, 2004 4:15 pm
- Location: Peterborough originally Hounslow &Durban
Re: Class 52 cab
Hi Tony,
You can get the complete set of Westerns from this site price £12.00 http://www.westernchampion.co.uk/Micros ... ulator.htm
There by Chris Bailey who did the original Western Cabview,or get the Padington to Penzance cd especialy if you plan to use either the Warships or Hymeks because you can use the cabviews from those in this set.
You can get the complete set of Westerns from this site price £12.00 http://www.westernchampion.co.uk/Micros ... ulator.htm
There by Chris Bailey who did the original Western Cabview,or get the Padington to Penzance cd especialy if you plan to use either the Warships or Hymeks because you can use the cabviews from those in this set.
Mike
Ex South African Railways Employee,My favorite loco is a SAR\SAS 25C Condensing Locomotive
Ex South African Railways Employee,My favorite loco is a SAR\SAS 25C Condensing Locomotive
- perfnet
- Well Established Forum Member
- Posts: 641
- Joined: Fri Nov 25, 2005 9:19 am
- Location: Midlands, UK
Re: Class 52 cab
I seem to recall the Severn Valley route has a Western Cab, too.
-
Tonysmedley
- Very Active Forum Member
- Posts: 3382
- Joined: Mon May 26, 2003 11:18 am
- Location: SPALDING UK
Re: Class 52 cab
Thank you! I had not restored Severn Valley after having to carry out a major re-ordering of my PC. There is quite a good cab with two Western locos on the route.
Tony
Tony
Tony (the old one)
