Atomic Systems

hi i have this Problem with

BR A4 60007 Sir Nigel Gresley [10230470 bytes] - DR_BR_A4_60007.zip File ID: 22641 Date: 18 Jun 2013 - 1108 Downloads

Have look in the shot to see whats up

Click the image to zoom in

Thanks for any help

Thats the same problem I,m having with the Devon Belle observation car

hi Andy is the car left behind when you Pull away from a standing start

Hi
I think there is a bracket missing on the first (rear) coupling..... and one too many after the second (front) coupling.

InertiaTensor ( Box (2.86924m 3.92851m 7.982838m) )
Coupling (
Type ( Chain )
Spring (
Stiffness ( 1e6N/m 2e6N/m )
Damping ( 1e6N/m 1e6N/m)
Break ( 1e8N 1e8N )
r0 ( 20cm 40cm )
)
Coupling (
Type ( Bar )
Spring (
Stiffness ( 1e7N/m 1e7N/m )
Damping ( 0.2e7N/m 0.2e7N/m )
Break ( 1e8N 1e8N )
r0 ( 10cm 1e9 )
)
CouplingHasRigidConnection ()
Velocity (0.1m/s)
CouplingUniqueType (DR_BR_A4_60007)
)
)
Buffers (
Spring (
Stiffness ( 1e6N/m 5e6N/m )
Damping ( 1e6N/m/s 1e6N/m/s )
r0 ( 0cm 1e9 )



Cheers
Jon

hi thanks Jon will try it later

Hi jon is it the loco eng or the Tender wag

jontrains12 wrote:Hi jon is it the loco eng or the Tender wag

Hi
Tender wag
Cheers
Jon

The tender .sd file has no ESD_Bounding_Box info.

hi how do i change that

Hi

Try

SIMISA@@@@@@@@@@JINX0t1t______
Shape ( DR_BR_A4_60007T.s
ESD_Detail_Level ( 0 )
ESD_Alternative_Texture ( 0 )
ESD_Bounding_Box ( -1.400411 -0.026177 -3.85 1.353055 3.994470 4.3738385 )

)

In the DR_BR_A4_60007T.sd file

Cheers
Jon

Thanks jon will try later

Hello,
I started with Jon's bounding box info, and shortened the boxes a little to exclude the buffers. Here are my values:

engine: ESD_Bounding_Box ( -1.400411 -0.026177 -6.8738385 1.353055 3.994470 6.2738385 )
tender: ESD_Bounding_Box ( -1.400411 -0.026177 -3.65 1.353055 3.994470 3.7738385 )

Coupling worked fine on front and rear end.

Another thing I changed was the direction of the front view in the cvf file because parts of the FreightAnim were visible in view #1. (You sometimes find the front view turned too far to the right for a better - but not realistic - signal visibility.)

Direction ( 6 12 0 )

Keep on steamin'!
Dietmar

Edit: I've just noticed that the car on you screen seems to be from the FDB_Mk1 set. I also used these cars for my test run. Out of the box these cars have automatic couplings. I changed them to chain (and the brake system to vacuum). Could different couplings be the reason for your problem?

Hi guys

I had a problem with this loco too but I think I may have fixed it now thanks to the advice on this page It appears it was the fact that there was no bounding box info in the tender .sd file.

the author might wanna make a pathc soon

Cheers,

Dark

hi everyone sorry i havent been here to sort this out as i have been having probblem with me internet conetion but all sorted now. The problem is the sd file that was uploaded has a line missing and i noticed this after i had uploaded it it was because i alter the tender at the last min and forgot to put the new sd file in sorry but i will up load a new one with the correct file asap
Dave Robinson

For those who want a qiuck fix copy this into the SD file

SIMISA@@@@@@@@@@JINX0t1t______
Shape ( DR_BR_A4_60007T.s
ESD_Detail_Level ( 0 )
ESD_Alternative_Texture ( 0 )
ESD_Bounding_Box ( -1.444703 0.009574 -3.9914195 1.424542 3.938089 3.9914195 )
)

hi dave thanks for that and are we going to see more a4