Train Lighting

[cilperiswh]

Hi all I was wondering if you could help me by explaining how to change the lighting configurations on 158/ 159 units so that they work correctly when turning on, work when you switch cabs and when in a loose consist both sets of red markers are on?

The units that need lighting changes are:

159102: only the back red markers work when as a loose consist and when you change cabs no lights work.

159104: only the back red markers work when as a loose consist and when you change cabs no lights work.

159107: only the back red markers work when as a loose consist and when you change cabs no lights work.

158786: the lights light up both dim both bright not bright dim then dim bright, the rear red marker lights do not work, when you switch cabs no lights work and when the unit is a loose consist only the back red marker lights work.

158889: when you switch cabs none of the lights work, the rear red marker lights are the only ones that work when it is a loose consist.

159013: lights light up as both markers both bright not bright dim dim bright. The rear red markers do not work, when you switch cabs no lights work and as a loose consist only the rear red marker lights work.

159016: as a loose consist none of the lights work the lights light up both dim both bright not bright dim (dim) dim bright (night) the rear red marker lights do not work and when you change cabs no lights work.

Any help with changing the lighting configurations so they work would be much appreciated

Matt

[rosssweet]

Hi all I was wondering if you could help me by explaining how to change the lighting configurations on 158/ 159 units, Matt

Hi Matt, Backup your 158/159 unit first, then copy and paste the lighting in the A unit and B unit. should work for 158s and 159s from UKTS. Regards Ross

Comment( **** Start BIN patch Lights for Class 158 855 engine A **** )
Lights ( 10
Light (
comment( Front Sphere of Light high beam ****** )
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
Cycle ( 0 )
FadeIn ( 1.0 )
FadeOut ( 1.0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffffffff )
Position ( 0.0 0.5 8.6 )
Transition ( 0 )
Radius ( 150.0 )
Angle ( 10.0 )
)
)
)
Light (
comment( Marker Light Right )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 2 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( -1.07 1.7 11.70 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Marker Light Left )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 2 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( 1.07 1.7 11.70 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Head Light )
Type( 0 )
Conditions (
Headlight ( 2 )
Unit ( 2 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( dceaeeee )
Position ( 0.9 1.7 11.78 )
Azimuth ( 0.0 0.0 0.0 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.3 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Head Light )
Type( 0 )
Conditions (
Headlight ( 3 )
Unit ( 2 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( dceaeeee )
Position ( -0.9 1.7 11.78 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.5 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Rear Red Right )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 4 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( 0.71 1.7 11.78 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Rear Red Left )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 4 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( -0.64 1.7 11.78 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( AI Marker Light Right )
Type( 0 )
Conditions (
Control ( 1 )
Service ( 2 )
Unit ( 2 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( -1.07 1.7 11.70 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( AI Marker Light Left )
Type( 0 )
Conditions (
Control ( 1 )
Service ( 2 )
Unit ( 2 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( 1.07 1.7 11.70 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( AI Head Light )
Type( 0 )
Conditions (
Control ( 1 )
Service ( 2 )
Unit ( 2 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( dceaeeee )
Position ( 0.9 1.7 11.78 )
Azimuth ( 0.0 0.0 0.0 )
Azimuth ( 0.0 0.0 0.0 )
Transition ( 0 )
Radius ( 0.4 )
Elevation ( 0.0 0.0 0.0 )
) ) ) )
Comment( **** End BIN patch Lights for Class 158 855 engine A **** )




Comment( **** Start BIN patch Lights for Class 158 855 engine B **** )
Lights ( 9
Light (
comment( Rear Red Right )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( -0.71 1.7 -11.70 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Rear Red Left )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 3 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( 0.71 1.7 -11.70 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Reverse Sphere of Light high beam ****** )
Type ( 1 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
Cycle ( 0 )
FadeIn ( 1.0 )
FadeIn ( 1.0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffffffff )
Position ( 0.0 2.0 -8.6 )
Azimuth ( 180.0 180.0 180.0 )
Transition ( 0 )
Radius ( 150.0 )
Angle ( 10.0 )
)
)
)
Light (
comment( Reverse Marker Light Right )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 5 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( -1.07 1.7 -11.70 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Reverse Marker Light Left )
Type( 0 )
Conditions (
Headlight ( 0 )
Unit ( 5 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( a0ffc771 )
Position ( 1.123 1.7 -11.70 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Reverse Head Light )
Type( 0 )
Conditions (
Headlight ( 2 )
Unit ( 5 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( dceaeeee )
Position ( -0.9 1.7 -11.80 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.3 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( Reverse Head Light )
Type( 0 )
Conditions (
Headlight ( 3 )
Unit ( 5 )
)
FadeIn ( 0.3 )
FadeOut ( 0.3 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( dceaeeee )
Position ( 0.9 1.7 -11.80 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.5 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( AI Rear Red Right )
Type( 0 )
Conditions (
Control ( 1 )
Service ( 2 )
Unit ( 3 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( 0.755 1.539 -10.723 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
)
)
)
Light (
comment( AI Rear Red Left )
Type( 0 )
Conditions (
Control ( 1 )
Service ( 2 )
Unit ( 3 )
)
FadeIn ( 0 )
FadeOut ( 0 )
Cycle ( 0 )
States ( 1
State (
Duration ( 0.0 )
LightColour ( ffff0000 )
Position ( -0.71 1.539 -10.723 )
Azimuth ( -180 -180 -180 )
Transition ( 0 )
Radius ( 0.2 )
Elevation ( 0.0 0.0 0.0 )
) ) ) )
Comment( **** End BIN patch Lights for Class 158 855 engine B **** )

[rosssweet]

[cilperiswh]

So do i delete whats in the files for lighting then add this or keep it and add it at the bottom?

[rosssweet]

So do i delete whats in the files for lighting then add this or keep it and add it at the bottom?

Remove the existing lighting routines completely, then replace them with these routines.
There is one BinPatch routine for engine A and one Binpatch routine for engine B.
Make a backup first of the 2 engine files,, make sure you delete the four brackets
at the end of the existing light statements. Note : this is only for BinPatch setups !
If you make a mistake or you do not have BinPatch installed, it just wont load the engine.
Only suitable for models by Steven Weller, Anton Courtney-May updated the textures of many.

Regards Ross

[cilperiswh]

i have set it up and it is working ok but there is one thing i do not like i have sent u a PM