Page 1 of 1
prob with Virgin Trains Class 390 [Pendolino]
Posted: Sat Mar 31, 2007 6:48 pm
by russellwhite2007
hi all again. rite i downloaded the Virgin Trains Class 390 [Pendolino] installed and done as the readme said but i find i cant drive it. i can turn lights on off put it in gear push the reset button etc but i cant move the power handle. it just wont move i've tried using the keyborad on luck mouse no luck any please as i need to get this train driveable for a act i'm tryin to make.
many thanks in advance rusty.
Posted: Sat Mar 31, 2007 6:57 pm
by Thrashin
Hi Rusty,
Have a look here:
http://forums.uktrainsim.com/viewtopic.php?t=65886
The solution is in there.
Cheers
Jack
Posted: Sat Mar 31, 2007 6:59 pm
by Thrashin
Or, more specifically:
bdy26 wrote:Check the dms eng file has got a combined controller line in it... looks something like this:
... "2. Press the ENTER key.\n"+
"3. Wait for the 'permission to depart' signal.\n"+
"TIP: Use the Next Station driving aid (F10) to monitor loading and unloading."
)
EngineControllers (
Throttle ( 0 1 0.25 0
NumNotches ( 5
Notch ( 0 0 Dummy )
Notch ( 0.25 0 Dummy )
Notch ( 0.50 0 Dummy )
Notch ( 0.75 0 Dummy )
Notch ( 1.00 0 Dummy )
)
)
Brake_Train ( 0 1 0.0125 0.5
NumNotches ( 6
Notch ( 0 0 TrainBrakesControllerReleaseStart )
Notch ( 0.2 0 TrainBrakesControllerHoldLappedStart )
Notch ( 0.25 1 TrainBrakesControllerGraduatedSelfLapLimitedHoldingStart )
Notch ( 0.85 0 TrainBrakesControllerSuppressionStart )
Notch ( 0.9 0 TrainBrakesControllerContinuousServiceStart )
Notch ( 0.95 0 TrainBrakesControllerEmergencyStart )
)
)
DirControl ( -1 0 1 1 )
Combined_Control( 0 1 0.4 0.82 throttle train )
EmergencyStopResetToggle( 0 1 0 )
EmergencyStopToggle( 0 1 0 )
AWS ( 0 1 0 )
Sanding ( 0 1 0 )
Horn ( 0 1 0 )
Vigilance ( 0 1 0 )
PantographToggle1 ( 0 1 1 )
Headlights ( 0 0.25 1 0 pov_pointer )
Wipers ( 0 1 0 )
)
)
...
Back it up first obviously, but I had that problem with something before.
Cheers
Jack
Posted: Sat Mar 31, 2007 7:12 pm
by ronald parkin
Hi Russell, Daft question, you are running it on a overhead electric route,and if so you have put up the pantograph ( P )?
Regards
Ron P
Posted: Sat Mar 31, 2007 7:36 pm
by russellwhite2007
thanks Thrashin thats done the job.
ronald your right it is daft question. lol you can only run it on overhead otherwise it wont come up. lol
Re: prob with Virgin Trains Class 390 [Pendolino]
Posted: Sun Sep 06, 2009 6:00 pm
by roblovestastytrace
Whereabouts would I find the dms.eng file for this as I am having the same problem.
many thanks
Rob
Re: prob with Virgin Trains Class 390 [Pendolino]
Posted: Mon Sep 07, 2009 6:48 pm
by energize
Easy, just go to your TRAINSET folder and look for the appropriate folder.
Re: prob with Virgin Trains Class 390 [Pendolino]
Posted: Mon Sep 07, 2009 7:00 pm
by roblovestastytrace
Have tried but there are 4 .eng files in the eb_wcml_390 folder