Page 1 of 1
Bachmann Class 08 Shunter Problems
Posted: Sun Jan 16, 2005 5:44 pm
by ntanswell
I have just brought a Bachmann Class 08 shunter in BR Blue Livery. I have only had the loco for two weeks and it has started playing up. The loco stutters and stops on straight track and over points but runs fine round the 2nd radius corners. My layout is always nice and clean on proper board - I am confident this is not a problem with 'fluff' contaminating the wheels or engine - indeed, the wheels are as clean as the day I bought it. Any idea what the problem might be?
Posted: Sun Jan 16, 2005 6:26 pm
by miller2002
Pick Ups Common problem on the bachmann 08
see link below on how to clean them
http://www.btinternet.com/~modern.image/
then go to workshop and Cleaning Bachmann 08 wheel sets.
this will tell you how to clean them
thanks
mark
Posted: Sun Jan 16, 2005 6:34 pm
by BR7MT
I have read that the wipers need to be bent slightly so that they push up against the back of the wheel more.
regards
Dan
Posted: Tue Jan 18, 2005 6:18 pm
by jdjonny
It's a design fault by bachmann from what I remember... don't the wipers toutch the top/bottom of the wheel instead of the back, or something? Because of their positioning, dirt collects on them and they need regular cleaning. I *THINK* this may have been corrected on later releases, although I wouldn't swear to it.
There was a press release on the bacchy site about it a while back, so pretty important.
JDJonny
Posted: Tue Jan 18, 2005 9:49 pm
by BR7MT
They are apparently fixing it this year, and might be fitting a DCC socket as well.
I wonder why....?
regards
Dan
Posted: Tue Jan 18, 2005 9:54 pm
by jdjonny
BR7MT wrote:They are apparently fixing it this year, and might be fitting a DCC socket as well.
I wonder why....?
regards
Dan
lol, mm, yes, funny that aint it?
Almost like bachmann are worried about some kind of competition
JDJonny
Posted: Fri Jan 28, 2005 1:40 pm
by LNERandBR
I had a problem with my Bachmann 08.
It was squeeking.
I oiled the outside fames where the connecting rods poke though and it cured the problem.
Has anyone elce had this problem?
Posted: Fri Jan 28, 2005 4:02 pm
by highterrace
I had a problem with my bachmann Jinty in that the pick-ups were nowhere near the wheels, the slight sideways movement in the chassis on a corner was enough to line them up, but they wouldn't work proper on the straight. 5 minutes with a pair of pliers sorted that one out though.