Atomic Systems

Why not give the route it's own texturing blueprint?---better than adding a texturing entry to the default file. It could be just a straight copy of the default, with whatever additions come along. This was actually what I'd got in mind :wink: Something similar to the way you helped me with the ori...

Thanks to Steve, I've got the procedure for changing the trackbed sorted for both versions. What remains is the "sky" & "weather" theme swap ! Now knowing how to do it, the question is, which route to plunder ? Looking at the required DLC, WCMLTV is the newest and also one of the main requirements f...

Of course Andy 8) Thanks :) One question, I made a modded "trackbed" texture file for my own use which I felt was a little better than the pebbles dark one currently used. Could this be implemented using the same method ? It should work ok, just change the path in the .bin file to wherever your tex...

Hi Alex55 Reading one of your replies to an earlier post, (as I was also missing some Tunnel Walls etc in occasional places) , I thought I would check to see if I had any of the files you advised should be in the set up... I do have the ECMLS Moorgate Extension installed, and have had since last ye...

stevegreen wrote:Of course Andy

Thanks
One question, I made a modded "trackbed" texture file for my own use which I felt was a little better than the pebbles dark one currently used.
Could this be implemented using the same method ?

The updated ballast idea sounds good Steve. I take it that the two bits of code that you attached need to be put somewhere - could you tell me where? Cracking route by the way, feels very professionally constructed. Really well done to Alex and Photons. AP Track ballast mod: https://drive.google.co...

This looks interesting Steve :) I had thought about it, but wasn't sure if it could be done (every day is a learning experience) The AP tweak patch included in the download does raise the track by 0.06m, this seemed to be a good compromise and produce a the best results with associated scenery objec...

As usual I am a bit late to the party on this one but decided this afternoon it was time to sort it. I had most of the requirements already including all the payware so relatively straightforward to put in the missing bits. Installation instructions were concise and clear. I set up a quick drive wi...

Hi just Tried the Quick Drive Euston (NB) Fast Lines to Birmingham New Street And at Kensal Tunnel Down Fast there’s a Red light when I press tab Request to Pass signal at danger denied I have tried to shut then Pass but I only get about half a mile and derail so I can not get past the Red Signal T...

For the Bakerloo junction sections you will need: Dark_Conc_texblock.bin for the roof, floor and and "sraight" walls (found in WCMLv5\Scenery\Clutter) BL_Jnc_Wall.bin "loft" for the curved walls (found in WCMLv5\Scenery\Procedural) Looking at your photo you may need to also copy Tunnel_5b.GeoPcDx i...

20180903150903_1.jpg I have just re tested the batch file and it worked correctly on my setup. I'll wait to see if the problem is solved when you try a manual file copy over, but It would be interesting to know why the batch file isn't doing it's job on your setup ? Ok,I have tested and the tunnels...

Great route, one of the best freeware to date. However, can anyone tell me how I can swap out the old out dated Kuju "Sky Dome" and weather system/lighting system for a modern modern one seen in routes like Liverpool - Manchester and South London Lines? Thanks! I think GPTech will be your man for t...

I have just re tested the batch file and it worked correctly on my setup.
I'll wait to see if the problem is solved when you try a manual file copy over, but It would be interesting to know why the batch file isn't doing it's job on your setup ?

The tunnel walls and ends on the Bakerloo underground section use Xsec's and Geo's copied from the TBT assets folder (part of the ECML South - Moorgate Extension route) during the batch process. It would do no harm to try running the batch again. OK , thanks a lot . At least I know where to look. I...

This is a fantastic route. I've got a problem with the tunnels (between the stations) missing on the southern underground sections of the Bakerloo Line . Yes I do have the ECML South Moorgate extension V4 with its TBT tunnels. It may be because the only thing that RwTools says I am missing ( apart ...